FourStarGroup 11226507R User manual

MODEL: 11226507R
STORAGE SHELF 3 DRAWER

PARTS AND HAREWARE LIST
PARTS LISTNO QTY.
2
A
B
C
D
E
F
G
H
I
J
K
L
2 PCS
3 PCS
3 PCS
3 PCS
1 PC
12 PCS
4 PCS
12 PCS
1 PC
1 PC
2 PCS
2 PCS
LEG FRAME
WIRE SHELF
NON-WOVEN BIN
BOTTOM PLATE
TOP PANEL
BOLT
SCREW
PLASTIC WASHER
ALLEN WRENCH
WRENCH
LOCKING CASTER
CASTER
BOH:30MM

ASSEMBLY INSTRUCTIONS
3
STEP 1
ATTACH WIRE SHELF (B) TO THE LEG FRAME (A) USING BOLT
(F) AND PLASTIC WASHER (H) WITH ACCESSARY ALLEN
WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 2
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 3
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 4
ATTACH TOP PANEL (E) TO THE STEP (3) METAL FRAME USING
SCREW (G) WITH PHILIPS SCREWDRIVER AS SHOWN, THEN
TIGHTEN ALL THE BOLTS AND SCREWS.
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY, FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACE TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOL REQUIRED:
PHILIPS SCREWDRIVER
A
A
B
H
FF
F
STEP 5
ATTACH THE LOCKING CASTER (K) AND CASTER (L) TO THE
STEP (4) FRAME WITH ACCESSARY WRENCH (J) AS SHOWN.
STEP 6
UNFOLD THE NON-WOVEN BIN (C) AND PLACE THE BOTTOM
PLATE (D) INTO THE BIN (C) AS SHOWN.
STEP 7
PLACE THE NON-WOVEN BIN (C) TO THE SHELF AS SHOWN.
CAUTION:
MAXIMUM LOADING CAPACITY FOR EACH SHELF IS
10 LBS (4.5 KG)

4
STEP 1
ATTACH WIRE SHELF (B) TO THE LEG FRAME (A) USING BOLT
(F) AND PLASTIC WASHER (H) WITH ACCESSARY ALLEN
WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 2
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 3
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 4
ATTACH TOP PANEL (E) TO THE STEP (3) METAL FRAME USING
SCREW (G) WITH PHILIPS SCREWDRIVER AS SHOWN, THEN
TIGHTEN ALL THE BOLTS AND SCREWS.
B
F
H
FF
B
F
H
F
I
STEP 5
ATTACH THE LOCKING CASTER (K) AND CASTER (L) TO THE
STEP (4) FRAME WITH ACCESSARY WRENCH (J) AS SHOWN.
STEP 6
UNFOLD THE NON-WOVEN BIN (C) AND PLACE THE BOTTOM
PLATE (D) INTO THE BIN (C) AS SHOWN.
STEP 7
PLACE THE NON-WOVEN BIN (C) TO THE SHELF AS SHOWN.
CAUTION:
MAXIMUM LOADING CAPACITY FOR EACH SHELF IS
10 LBS (4.5 KG)

STEP 1
ATTACH WIRE SHELF (B) TO THE LEG FRAME (A) USING BOLT
(F) AND PLASTIC WASHER (H) WITH ACCESSARY ALLEN
WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 2
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 3
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 4
ATTACH TOP PANEL (E) TO THE STEP (3) METAL FRAME USING
SCREW (G) WITH PHILIPS SCREWDRIVER AS SHOWN, THEN
TIGHTEN ALL THE BOLTS AND SCREWS.
STEP 5
ATTACH THE LOCKING CASTER (K) AND CASTER (L) TO THE
STEP (4) FRAME WITH ACCESSARY WRENCH (J) AS SHOWN.
STEP 6
UNFOLD THE NON-WOVEN BIN (C) AND PLACE THE BOTTOM
PLATE (D) INTO THE BIN (C) AS SHOWN.
STEP 7
PLACE THE NON-WOVEN BIN (C) TO THE SHELF AS SHOWN.
CAUTION:
MAXIMUM LOADING CAPACITY FOR EACH SHELF IS
10 LBS (4.5 KG)
E
G
JK
K
LL
5

STEP 1
ATTACH WIRE SHELF (B) TO THE LEG FRAME (A) USING BOLT
(F) AND PLASTIC WASHER (H) WITH ACCESSARY ALLEN
WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 2
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 3
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 4
ATTACH TOP PANEL (E) TO THE STEP (3) METAL FRAME USING
SCREW (G) WITH PHILIPS SCREWDRIVER AS SHOWN, THEN
TIGHTEN ALL THE BOLTS AND SCREWS.
STEP 5
ATTACH THE LOCKING CASTER (K) AND CASTER (L) TO THE
STEP (4) FRAME WITH ACCESSARY WRENCH (J) AS SHOWN.
STEP 6
UNFOLD THE NON-WOVEN BIN (C) AND PLACE THE BOTTOM
PLATE (D) INTO THE BIN (C) AS SHOWN.
STEP 7
PLACE THE NON-WOVEN BIN (C) TO THE SHELF AS SHOWN.
CAUTION:
MAXIMUM LOADING CAPACITY FOR EACH SHELF IS
10 LBS (4.5 KG)
D
C
C
C
C
6

CAUTION: MAXIMUM LOADING
CAPACITY IS 10 LBS.
DO NOT SIT, STAND, LEAN, WALK OR
JUMP! FAILURE TO COMPLY WITH
THIS CAUTION COULD RESULT IN
PERSONAL INJURY AND/OR
PROPERTY DAMAGE!
STEP 1
ATTACH WIRE SHELF (B) TO THE LEG FRAME (A) USING BOLT
(F) AND PLASTIC WASHER (H) WITH ACCESSARY ALLEN
WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 2
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 3
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 4
ATTACH TOP PANEL (E) TO THE STEP (3) METAL FRAME USING
SCREW (G) WITH PHILIPS SCREWDRIVER AS SHOWN, THEN
TIGHTEN ALL THE BOLTS AND SCREWS.
10 LBS (4.5KG)
7
Do you have any questions? Missing small parts or hardware?
If you need assistance with the assembly of your STORAGE
SHELF 3 DRAWER please e-mail our Customer Service
Department at: [email protected] or
call us at [phone], [phone]
or visit www.fourstari.com
Please include the following information when contacting us:
• Where item was purchased
• Item, model, style or SKU number listed on instructions or box
• Part number, description of the part and quantity needed
• Copy of Proof of Purchase from Authorized Reseller Required
This information will help us get the proper part to you faster.
STEP 5
ATTACH THE LOCKING CASTER (K) AND CASTER (L) TO THE
STEP (4) FRAME WITH ACCESSARY WRENCH (J) AS SHOWN.
STEP 6
UNFOLD THE NON-WOVEN BIN (C) AND PLACE THE BOTTOM
PLATE (D) INTO THE BIN (C) AS SHOWN.
STEP 7
PLACE THE NON-WOVEN BIN (C) TO THE SHELF AS SHOWN.
CAUTION:
MAXIMUM LOADING CAPACITY FOR EACH SHELF IS
10 LBS (4.5 KG)