Foxconn Destroyer User manual

Destroyer Motherboard
User’s Manual

Statement:
This manual is the intellectual property of Foxconn, Inc. Although the information
in this manual may be changed or modied at any time, Foxconn does not obligate
itself to inform the user of these changes.
Trademark:
All trademarks are the property of their respective owners.
Version:
User’s Manual V1.0 for Destroyer motherboard.
P/N: 3A220UY00-000-G
Symbol description:
Caution: refers to important information that can help you to use motherboard
better, and tells you how to avoid problems.
Warning: indicating a potential risk of hardware damage or physical injury may
exist.
WEEE:
The use of this symbol indicates that this product may not be treated as household
waste.Byensuringthisproductisdisposedof correctly, you will helppreventpotential
negative consequences for the environment and human health, which could other-
wise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city ofce, your
household waste disposal service or the shop where you purchased this product.
More information:
If you want more information about our products, please visit Foxconn’s
website: http://www.foxconnchannel.com
CAUTION
!
W
A
R
N
I
N
G
!
© All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
All images are for reference only, please refer to the physical motherboard for specic features.

Declaration of conformity
HON HAI PRECISION INDUSTRY COMPANY LTD
66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
TAIPEI HSIEN, TAIWAN, R.O.C.
declares that the product
Motherboard Destroyer
is in conformity with
(reference to the specication under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
■ EN 55022:1998/A2:2003 Limits and methods of measurements of radio
disturbance characteristics of information technology
equipment
■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)
■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage uctuations and icker in low
voltage supply systems for equipment with rated current
<= 16A
■ EN 55024/A2:2003 Information technology equipment-Immunity
characteristics limits and methods of measurement
Signature : Place / Date : TAIPEI/2008
Printed Name : James Liang

Declaration of conformity
Trade Name: FOXCONN
Model Name: Destroyer
Responsible Party: PCE Industry Inc.
Address: 458 E. Lambert Rd.
Fullerton, CA 92835
Telephone: [phone]
Facsimile: 714-738-8838
Equipment Classication: FCC Class B Subassembly
Type of Product: Motherboard
Manufacturer: HON HAI PRECISION INDUSTRY
COMPANY LTD
Address: 66 , CHUNG SHAN RD., TU-CHENG
INDUSTRIAL DISTRICT, TAIPEI HSIEN,
TAIWAN, R.O.C.
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions : (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Tested to comply with FCC standards.
Signature : Date : 2008

Installation Precautions
Please carefully read the following procedures to install your computer :
■ It is suggested to select high-quality, certied fans in order to avoid damage
to the motherboard and CPU due to high temperature. Never turn on the
computer if the CPU fan is not properly installed.
■ We cannot guarantee that your system can operate normally when your
CPU is overclocked. Normal operation depends on the overclocking capac-
ity of your device.
■ If there is any, when connecting USB, audio, 1394a, RS232 COM, IrDA or
S/PDIF cables to the internal connectors on the motherboard, make sure
their pinouts are matching with the connectors on the motherboard. Incorrect
connections might damage the motherboard.
■ When handling the motherboard, avoid touching any metal leads or connec-
tors.
■ If there is a PCI Express x16 graphics card installed in your system, we
recommend using a 24-pin ATX power supply to get the best performance.
■ Before turning on the power, please make sure the power supply AC input
voltage setting has been congured to the local standard.
■ To prevent damage to the motherboard, do not allow screws to come in contact
with the motherboard circuit or its components. Also, make sure there are no
leftover screws or metal components placed on the motherboard or within the
computer casing.
■ If you are uncertain about any installation steps or have a problem related to
the use of the product, please consult a certied computer technician.
CAUTION
!
■ Electrostatic discharge (ESD) is the sudden and momentary electric current
that ows between two objects at different electrical potentials. Normally it
comes out as a spark which will quickly damage your electronic equipment.
Please wear an electrostatic discharge (ESD) wrist strap when handling
components such as a motherboard, CPU or memory.
■ Ensure that the DC power supply is turned off before installing or removing
CPU, memory, expansion cards or other peripherals. It is recommended to
unplug the AC power cord from the power supply outlet. Failure to unplug
the power supply cord may result in serious damage to your system.
W
A
R
N
I
N
G
!

TABLE OF CONTENTS
Chapter 1 Product Introduction
Package List.............................................................................................2
Product Specications..............................................................................3
Layout.......................................................................................................5
Back Panel Connectors............................................................................6
Chapter 2 Hardware Install
Install the CPU and CPU Cooler..............................................................9
Install the Memory..................................................................................11
Install an Expansion Card ......................................................................13
Install other Internal Connectors ............................................................14
Install the Optional Accessory................................................................18
Jumpers..................................................................................................19
Onboard Button......................................................................................21
Onboard LED .........................................................................................21
Chapter 3 BIOS Setup
Enter BIOS Setup...................................................................................23
Main Menu..............................................................................................23
System Information ................................................................................25
Advanced BIOS Features.......................................................................27
Advanced Chipset Features...................................................................28
Integrated Peripherals............................................................................30
Power Management Setup.....................................................................35
PC Health Status....................................................................................38
Quantum BIOS.......................................................................................39
Load Optimized Defaults........................................................................46
Set Supervisor Password.......................................................................46
Set User Password.................................................................................46
Save & Exit Setup ..................................................................................46
Exit Without Saving................................................................................46
Chapter 4 CD Instruction
Utility CD content....................................................................................48
AEGIS PANEL
Main Panel .......................................................................................51
Overclocking.....................................................................................52
HWM INFO.......................................................................................53
ALARM.............................................................................................64

CONFIG ...........................................................................................55
FOX LiveUpdate
Local Update....................................................................................56
Online Update ..................................................................................58
Congure .........................................................................................61
About & Help....................................................................................63
FOX DMI ................................................................................................64
FOX LOGO.............................................................................................65
Chapter 5 RAID Conguration
RAID Conguration Introduction.............................................................68
NVIDIA® MediaShield Driver.................................................................70
Create RAID Driver Diskette ..................................................................72
RAID Enable in BIOS.............................................................................74
Select a RAID Array for Use...................................................................74
Install a New Windows XP .....................................................................90
Setting Up a Non-Bootable RAID Array..................................................97
Appendix - NVIDIA® SLI™ Technology................................................103
Technical Support :
Website :
http://www.foxconnchannel.com
Support Website :
http://www.foxconnsupport.com
Worldwide online contact Support :
http://www.foxconnchannel.com/support/online.aspx
CPU, Memory, VGA Compatibility Supporting Website :
http://www.foxconnchannel.com/product/Motherboards/compatibility.aspx
Support

Thank you for buying Foxconn Quantum Force series motherboard-
Destroyer. Foxconn Quantum Force products are engineered to
maximize computing power, providing only what you need for break-
through performance.
With advanced overclocking capability and a range of connectivity
features for today multi-media computing requirements, Destroyer
enables you to unleash more power from your computer.
This chapter includes the following information:
■ Package List
■ Product Specications
■ Layout
■ Back Panel Connectors

2
1
Package List
Check your product package for the following items:
Before your purchase, if any of the above items is damaged or missing, please contact
your retailer. Accessories are not in the warranty, only motherboard is.
CAUTION
!
Motherboard Foxconn Destroyer motherboard
I/O modules 1 x USB 2.0 x 2 ports and 1 x 1394a module
1 x SPDIF Out module
Cables 4 x SATA power and signal cables
2 x SATA power and signal cables right angle
1 x Ultra DMA 133/100/66 cable
1 x Floppy disk drive cable
Accessory 15 x Cable tie
1 x I/O shield
1 x Heat-Pipe expansion module
1 x Quantum Flow-GPU blower
1 x 2-way SLI bridge
1 x 3-way SLI bridge
1 x 3-way SLI plus bridge
1 x PCB tray
1 x 50k variable resistor
1 x 20k variable resistor
Copper column bolt
Application CD Foxconn motherboard support CD
Documentation User’s manual
Quick installation guide
Registration card
Quantum Force sticker
Quantum Force tattoos
Quantum Force dogtag

3
1
1-1 Product Specications
CPU Support AMD socket AM2+ PhenomTM FX / PhenomTM series processors
Support AMD socket AM2 series processors :
AthlonTM 64 FX / AthlonTM 64X2 Dual-Core / AthlonTM X2 Dual-Core /
AthlonTM 64 / SempronTM
HyperTransport 2000/1600MT/s for AM2 CPU
Up to 5200MT/s (HT3.0) forAM2+ CPU
Chipset NVIDIA nForce 780a SLI
Memory 4 x 240-pin DDR2 DIMM sockets
Support up to 8GB of system memory
Dual channel DDR2 1066*(oc*)/800/667/533MHz architecture
*DDR2 1066 is only supported by some AM2+ CPU
(oc*: Overclock)
Audio Realtek 8-channel audio chip
High Denition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out
Support Jack-Sensing function
LAN Broadcom 5786 Gigabit LAN chip
Broadcom 5788 Gigabit LAN chip
Expansion Slots 4 x PCI Express x16 slots
1 x PCI Express x1 slot
1 x PCI slot
Onboard Serial ATA 6 x SATA connectors (Controlled by nForce 780a SLI)
300MB/s data transfer rate
Support hot plug and NCQ (Native Command Queuing )
Support RAID 0, RAID 1, RAID 5, RAID 0+1
USB Support hot plug
Support up to 12 x USB 2.0 ports (6 rear panel ports, 3 onboard USB
headers supporting 6 extra ports)
Supports USB 2.0 protocol up to 480Mb/s
Internal Connectors 1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x Floppy disk drive connector
1 x IDE connector (Conrtolled by nForce 780a SLI)
6 x SATA connectors
3 x USB 2.0 connectors (supporting 6 x USB devices)
1 x CPU fan header (4-pin)
2 x System fan headers (3-pin)
2 x Power fan headers (3-pin)(FAN1, FAN2)
1 x Front panel connector
1 x CD_IN connector
1 x Front Audio connector
1 x Speaker connector

4
1
1 x COM1 connector
1 x IrDA connector
1 x Chassis intrusion alarm header (INTR)
1 x S/PDIF Out connector
1 x 1394a connector
Back Panel 1 x PS/2 keyboard port
Connectors 1 x VGA port
1 x DVI-D port
1 x 1394a port
2 x External SATA ports (Controlled by JMicron JMB362)
6 x USB 2.0 ports
2 x RJ-45 LAN ports
8-channel Audio ports
Hardware Monitor System voltage detection
CPU/System temperature detection
CPU/System/Power fan speed detection
System voltage warning
CPU/System overheating warning
CPU/System/Chipset fan speed control
Onboard 1394a Support hot plug
400Mb/s transmission rate
Support 2 independent 1394a units synchronously at most
PCI Express x1 Support 250MB/s (500MB/s concurrent) bandwidth
Low power consumption and power management features
PCI Express x16 Gen2 PCI-E1_16X and PCI-E3_16X support 8GB/s (16GB/s concurrent) bandwidth
PCI-E2_16X and PCI-E4_16X support 4GB/s (8GB/s concurrent) bandwidth
Low power consumption and power management features
Green Function Support ACPI (Advanced Conguration and Power Interface)
Support S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4
(suspend to disk), and S5 (soft - off)
Bundled Software AEGIS PANEL
FOX LiveUpdate
FOX DMI
FOX LOGO
Operating System Support for Microsoft®Windows®Vista/XP/2000
Form Factor ATX Form Factor, 12 inches x 9.6 inches (30.5cm x 24.4cm)

5
1
1-2 Layout
Note : The above motherboard layout is for reference only, please refer to the physical
motherboard for detail.
1. 8-pin ATX 12V Power Connector
2. SYS_FAN Headers
3. PCI Express x1 Slot
4. PCI Slot
5. PCI Express x16 Slots
6. Front Audio Connector
7. CD_IN Connector
8. S/PDIF Out Connector
9. COM1 Connector
10. 1394a Connector
11. Chipset: NVIDIA nForce 200
12. Front USB Connectors
13. Power On Button
14. Reset Button
15. Clear CMOS Button
16. Front Panel Connector
17. SATA Connectors
18. Speaker Connector
19. BIOS_SELECT Jumper
20. IrDA Connector
21. Chipset: NVIDIA nForce 780a SLI
22. Power FAN Headers
23. IDE Connector
24. 24-pin ATX Power Connector
25. Floppy Connector
26. +5V Standby LED
27. DDR2 DIMM Slots
28. Chassis Intrution Alarm Header
29. DRAM Power LED
30. Clear CMOS Jumper
31. CPU_FAN Header
32. CPU Socket
8
9
13
14 15
12
10
201816 17 19
1
2
45
22
3
23
27
25
21
11
24
7
6
2
22
29 30
31
32
28
26

6
1
1-3 Back Panel Connectors
1. PS/2 Keyboard Port
Use the upper port (Purple) to connect a PS/2 keyboard.
2. USB Ports
The USB port supports the USB 2.0/1.1 specication. Use this port to connect a USB device
such as a USB keyboard/mouse, USB printer, USB ash drive and etc.
3. VGA Port
To connect with external display device, such as a monitor or LCD display.
4. DVI-D Port
The DVI-D port supports DVI-D specication. Connect a monitor that supports DVI-D connection
to this port.
5. 1394a Port
This port is used to connect a 1394a device.
6. External SATA Ports
To connect external SATA device(s) to your system by expanding the internal SATA port(s) to
the chassis back panel. External SATA device shall provide power by its own.
7. Audio Connectors
For the denition of each audio port, please refer to the table below :
Port 2-channel 4-channel 5.1-channel 7.1-channel
Blue Line In Line In Line In Line In
Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Microphone In Microphone In Microphone In Microphone In
Orange - - Center/Subwoofer Out Center/Subwoofer Out
Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out
Grey - - - Side Speaker Out
USB Ports
LAN Ports
VGA Port
USB Ports
PS/2 Keyboard Port
67
3
1
DVI-D Port Audio Ports
Line Out
Microphone
Subwoofer
Rear Speaker
Side Speaker
Line In
8
External SATA
Ports
5
4
2 2
1394a Port

7
1
8. RJ-45 LAN Ports
The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.
LAN Type Left: Active Right: Link
Status Description Status Description
1000M
Off No Link Off No Link
Green
Blinking Data Activity
Off 10Mb/s Connection
Green 100Mb/s Connection
Orange 1000Mb/s Connection
Active
LED Link
LED

Please visit this website for more supporting information about CPU, Memory and
VGA for your motherboard :
http://www.foxconnchannel.com/product/Motherboards/compatibility.aspx
This chapter introduces the hardware installation process, including
the installation of the CPU, memory, power supply, slots, pin headers
and the mounting of jumpers. Caution should be exercised during
the installation of these modules. Please refer to the motherboard
layout prior to any installation and read the contents in this chapter
carefully.
This chapter includes the following information :
■ Install the CPU and CPU Cooler
■ Install the Memory
■ Install an Expansion Card
■ Install other Internal Connectors
■ Install the Optional Accessory
■ Jumpers
■ Onboard Button
■ Onboard LED

9
2
2-1 Install the CPU and CPU Cooler
Install the CPU
Locate the Pin-1 CPU triangle mark and the Pin-1 corner of the CPU socket.
Pin-1 triangle
marking of CPU
Pin-1 corner of the
CPU socket
Read the following guidelines before you begin to install the CPU :
■ Make sure that the motherboard supports the CPU.
■ Always turn off the computer and unplug the power cord from the power supply before
installing the CPU to prevent hardware damage.
■ Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly.
■ Apply an even and thin layer of thermal grease on the surface of the CPU.
■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating
and damage of the CPU may occur.
■ Set the CPU host frequency in accordance with the CPU specications. It is not
recommended that the system bus frequency be set beyond hardware specications
since it does not meet the standard requirements for the peripherals. If you want to
set the frequency beyond the standard specications, please do so according to your
hardware specications including the CPU, graphics card, memory, hard drive, etc.
CAUTION
!
1. Release the CPU socket lever. 2. Align pin one of the CPU with the
CPU socket, and gently put the
CPU onto the socket.

10
2
3. When CPU is properly seated,
push the CPU socket lever back
to its locked position.
Install the CPU Cooler
Follow the steps below to correctly install the CPU cooler.
(The following procedures use Foxconn cooler as the example.)
1.Applyandspreadaneven thermal
grease on the surface of CPU. 2. Buckle the heatsink rmly at one
side of the stand.
3. Buckle the heatsink at another
side, and press the fasten lever
down to tightly seat the cooler.
4. Attach the 3-wire CPU cooler
connector to the CPU fan header
on the motherboard.
Use extreme care when removing the CPU cooler because the thermal grease may
adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.
CAUTION
!

11
2
2-2 Install the Memory
Dual Channel Memory Conguration
This motherboard provides four DDR2 memory sockets and supports Dual Channel Technology.
When memory is installed, the BIOS will automatically check the memory in your system.
Four DDR2 memory sockets are divided into two channels :
Channel 0 : DIMM1, DIMM3
Channel 1 : DIMM2, DIMM4
The combinations of DIMM modules are :
It is recommended that memory of the same capacity, brand, speed, and chips be
used and please select dual channel rst to achieve optimum performance.
CAUTION
!
Read the following guidelines before you begin to install the memory :
■ Make sure that the motherboard supports the memory. It is recommended that memory
of the same capacity, brand, speed, and chips be used.
■ Always turn off the computer and unplug the power cord from the power outlet before
installing the memory to prevent hardware damage.
■ Memory modules have a foolproof design. A memory module can be installed in only
one direction. If you are unable to insert the memory, switch the direction.
CAUTION
!
DIMM1 DIMM2 DIMM3 DIMM4
Single Channel DS/SS - - -
Single Channel DS/SS - DS/SS -
Single Channel - - DS/SS -
Single Channel - DS/SS - DS/SS
Dual Channel DS/SS DS/SS - -
Dual Channel - - DS/SS DS/SS
Dual Channel DS/SS DS/SS DS/SS DS/SS
(DS : Dual Side, SS : Single Side, - : No Memory)

12
2
Installing a Memory
Ifyoutakealookatfrontsideofmemorymodule,ithasasymmetricpincountsonbothsidesseparated
by a notch in the middle, so it can only t in one direction. Follow the steps below to correctly install
your memory modules into the sockets.
Step 1:
Spread the clips at both ends of the memory socket.
Place the memory module onto the socket, then put
your ngers on top edge of the module, and push
it down rmly and seat it vertically into the memory
socket.
Step 2:
Theclipsatbothendsofthesocketwillsnapintoplace
when the memory module is securely inserted.
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module. Be sure
to install DDR2 DIMMs on this motherboard.
CAUTION
!
112-Pin128-Pin
Notch

13
2
2-3 Install an Expansion Card
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis
back panel.
2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.
4. Secure the card's metal bracket to the chassis back panel with a screw.
5. After installing all expansion cards, replace the chassis cover.
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for
your expansion card(s).
7. Install the driver provided with the expansion card in your operating system.
Installing and Removing a PCI Express x16 Graphics Card :
• Installing a Graphics Card:
Gently insert the graphics card into the PCI Express x16 slot.
Make sure the graphics card is locked by the latch at the end of
the PCI Express x16 slot.
• Removing the Card:
Push the latch at the end of the PCI Express x16 slot to release
the card and then pull the card straight up from the slot.
■ Make sure the motherboard supports the expansion card. Carefully read the manual
that came with your expansion card.
■ Always turn off the computer and unplug the power cord from the power outlet before
installing an expansion card to prevent hardware damage.
CAUTION
!
PCI Express x1
PCI Express x16 (PCI-E x16 mode)
PCI
PCI Express x16 (PCI-E x8 mode)