Foxfury Lighting Solutions RUGO Series User manual

QUICK START GUIDE
P/N 85-023
RUGO DRONE MOUNTS
FOR YUNEEC H520 & TYPHOON H (SET OF 2)
HOW TO ATTACH MOUNTS
1. Start by matching the correct side of the
RUGO to the Drone Mount, making sure the
metal tab of the RUGO fits into the Drone
Mount notch.
2. Use the (2) two thumb screws to attach the
RUGO to the Drone Mount.
3. To attach the Drone Mount to the Yuneec
Typhoon Drone, position the open side of the
mount against one of the landing gear legs
and rotate clock-wise until the Mount snaps
into a vertical postition
4. Rotate the Mount 180° on the drone landing
gear leg so that the Rugo light sits inboard
of the drone landing gear (between leg and
camera).
5. Slide the Drone Mount down the drone leg
until it stops.
6. Repeat for both sides.
7. Reverse these steps to remove the Drone
Mounts
WHAT'S INCLUDED:
(2) RUGO Drone Mounts
(2) Thumb Screws
GENERAL MAINTENANCE TIPS
As needed, wash your FoxFury Rugo Drone
Mounts using a soft washcloth, clean water
and a mild soap. When done, pat dry with a
soft cloth.
4/2018
1
2
3
4-5

2
WARNINGS
FoxFury, LLC is not responsible for the incorrect
use of any FoxFury Lighting product.
When used for extended periods of time the
Rugo will become HOT to the touch. Please
use care when operating.
Do not stare into LEDs for long periods of
time or from a close range (less than 2 ft).
FoxFury, LLC is not responsible for any
injury or damage caused during the use of
this product.
Usage of this product must be supervised
by an adult when it is being used by a minor.
Any FoxFury product should be operated
at speeds safe enough to maneuver around
surrounding obstacles.
Do not use under the influence of drugs or
alcohol.
LIMITED WARRANTY
FoxFury, LLC (“FoxFury”) warrants to the
purchaser of this product (“Buyer”) that for
a period of two years following purchase, this
product will be free from defects in material
and workmanship and will function in substantial
compliance with FoxFury’s written specifications
for this product as specified in the instruction
manual or on FoxFury’s website located at www.
FoxFury.com. Buyer’s exclusive remedy shall, in
any case, be limited, at FoxFury’s election, to: A)
repair or replacement of the defective product; or
B) refund of the purchase price for this product.
THE FOREGOING WARRANTY IS THE ONLY
WARRANTY MADE BY FOXFURY WITH
RESPECT TO THIS PRODUCT. TO THE
EXTENT ALLOWED BY APPLICABLE LAW,
THERE ARE NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND BY THE FOXFURY,
EXPRESS OR IMPLIED, WITH RESPECT TO
THE CONDITION OR PERFORMANCE OF THIS
PRODUCT, INCLUDING, BUT NOT LIMITED
TO, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
THIS LIMITED WARRANTY SHALL NOT
APPLY IF THIS PRODUCT IS NOT STORED,
HANDLED, INSTALLED OR USED IN STRICT
ACCORDANCE WITH MANUFACTURER’S
SPECIFICATIONS AND INSTRUCTION
MANUALS, OR WHICH HAS BEEN SUBJECT
TO MISUSE, ALTERATION, NEGLIGENCE OR
ACCIDENT.
1. The damaged part or product must be
returned to FoxFury PRIOR TO any repair
or replacement. Shipping costs are the
responsibility of the claimant.
2. You must obtain a return authorization
(RMA) number from FoxFury prior to
returning products. FoxFury is not
responsible for any damage incurred while
in transit.
3. Buyer will be required to show proof of
purchase—NO EXCEPTIONS.
4. Any modifications to light, cable or battery
pack automatically voids all warranties on
this product.
All warranty inquiries should be directed to
FoxFury’s Customer Service Department at
[e-mail] to handle all warranty/repair-
related inquiries.
TO THE EXTENT ALLOWED BY APPLICABLE
LAW: (A) IN NO EVENT, WHETHER DUE TO
BREACH OF WARRANTY HEREUNDER OR
ANY OTHER CAUSE WHATSOEVER, SHALL
FOXFURY BE LIABLE FOR OR OBLIGATED
IN ANY MANNER TO PAY CONSEQUENTIAL,
INCIDENTAL OR INDIRECT DAMAGES,
INCLUDING, BUT NOT LIMITED TO, LOSS OF
PROFITS, COST OF SUBSTITUTE PRODUCTS
AND PERSONAL INJURY OR PROPERTY
DAMAGE, WHETHER SUCH CLAIM IS BASED
ON CONTRACT OR TORT OR ANY OTHER
THEORY OF LAW, AND (B) FOXFURY’S ONLY
DUTIES IN CONNECTION WITH THE SALE OF
THIS PRODUCT SHALL BE TO HONOR THE
LIMITED WARRANTY SET FORTH HEREIN. TO
THE EXTENT THAT THIS LIMITED WARRANTY
IS INCONSISTENT WITH APPLICABLE LAW,
THIS STATEMENT SHALL BE DEEMED
MODIFIED TO BE CONSISTENT WITH SUCH
APPLICABLE LAW.
CONTACT FOXFURY
FoxFury, LLC
Oceanside, CA 92056 USA
Toll-Free: 844-FOXFURY
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: FoxFury.com
All FoxFury products are designed in Oceanside,
CA. All FoxFury products are manufactured
with the highest quality USA and foreign parts.
Products are assembled in either FoxFury’s
controlled plant in Asia or the USA, under strict
quality control.
WARRANTY AND OTHER
INFORMATION