foxunhd FX-SP07S User manual

Operating Instructions
www.foxunhd.com
FX-SP07S HDMI Splitter
HDMI 2.0 1x8 HDMI Splitter, HDCP2.2
Supports 3D, 4Kx2K@60Hz(YUV 4:4:4), 18G, HDR, EDID
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
ABLE OF CONTENTS
Feature
Introduction
Specifications
Package Contents
Panel Descriptions
EDID Introduction
Connecting and Operating
Typical Application
Product Service
Warranty

Operating Instructions
www.foxunhd.com
Feature
Simultaneously displays an UItra Hi-Def source on up to eight UItra HD displays.
Supports resolutions up to UItra HD 4Kx2K(3840x2160@60Hz YUV 4:4:4 ) .
Supports four kinds of EDID handling abilities: mixed EDID, copy EDID, default 1080p output, default
4Kx2K output.
Supports HDCP2.2/1.4 Compliant.
Supports 36 bit Deep Color.
Supports LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio.
Support 3D.
Bandwidth 18G.
Support HDR.
Support online firmware upgrade via Micro USB Port.
DC 5V 1A Power supply.
Power consumption:5watts
Dimension (L×W×H):247.2x110x17mm
NOTICE
Our company reserve the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
INTRODUCTION
FX-SP07S is a HDMI Splitter that distribute 1 Ultra HD source to 8 Ultra HD displays,with 2 Bit DIP switch
to select from 4 kinds of EDID models.
SPECIFICATIONS
Operating Temperature Range
-5 to +40℃(+23 to +104℉)
Operating Humidity Range
5 to 90%RH (No Condensation)
Bandwidth frequency
18Gbps
HDCP
HDCP2.2
Input Ports
1xHDMI (Female)

Operating Instructions
www.foxunhd.com
Output ports
8xHDMI outputs(female)
Resolution outputs
Up to 4k x2k(3840x2160@60Hz YUV 4:4:4)
Transmission Distance
15m (Maximum) over standard HDMI cable/26AWG
Power consumption
5watts
Dimension (L×W×H)
247.2x110x17mm
Net Weight
610g
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
PACKING CONTENTS
1) Main Unit. 1x HDMI Splitter
2) 1x 5V 1A DC Power Supply.
3) User manual
Notes: Please confirm if the product and the accessories and all in duded, if not please contact with
the dealers.
PANEL DESCRIPTION
1Indicator of HDMI output
2Firmware port
3Switch to “Mixed EDID” mode
4Switch to “Auto EDID” mode
5Switch to “Copy EDID” mode
6Indicator of Power input
7Power on/off: press the up/down to open/close the device

Operating Instructions
www.foxunhd.com
8Power input
9HDMI output ports
10 HDMI input port
EDID Introduction:
Copy EDID: output 8 is prior port
When output 8 is connected to one display, another display which connected to other outputs will follow the
Resolution of output 8.
Auto: Default 4K@60Hz.
Mixed EDID: always follow the lowest resolution of the displays connected to 8 outputs
in order to support all displays show the source.
The HDCP Version is prior to EDID, when the source is HDCP2.2, if the TV supports HDCP2.2, it will
output 4K@60Hz, if the TV doesn’t support HDCP2.2, it will output 1080p. please see below table:
Input source
HDMI display
Support HDCP2.2
HDMI display
Doesn’t support HDCP2.2
HDCP2.2 4K@60Hz
HDCP2.2 4K@60Hz
HDCP1.4 1080p@60Hz
HDCP2.2 4K@24Hz
HDCP2.2 4K@24Hz
HDCP1.4 1080p@24Hz
HDCP1.4 4K@24Hz
HDCP1.4 4K@24Hz
HDCP1.4 4K@24Hz
Support HDR under copy EDID and Mixed EDID mode!
CONNECT AND OPERATE
1) Connect the HDMI input source to input port of HDMI Splitter
2) Connect the HDMI Splitter output ports to the displays
3) Connect DC 5V1A power to the power port of the FX-SP07S.

Operating Instructions
www.foxunhd.com
Typical Application
Attention: 1) Insert/Extract cable gently.
2) Please don’t insert into or pull out HDMI Cable when power on. please connect Cable
only when power is off.
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes
may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit
is in proper working condition.

Operating Instructions
www.foxunhd.com
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our Company
(referred to as "the warrantor" ) will , for the length of the period indicated as below,
(Parts(2)Year ,Labor(90) Days) which starts with the date of original purchase ("Limited Warranty period"),
at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during
the warranty period. This Limited Warranty is extended only to the original purchaser and only covers
product purchased as new. A purchase receipt or other proof of original purchase date is required for
Limited Warranty service.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by
warrantor,or failures which result from accidents,misuse,abuse,neglect, mishandling, misapplication,
alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory
Service center or other Authorized Servicer, or damage that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images,
data or other recorded content. The items listed are not exclusive, but are for illustration only.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.