foxunhd FX-MX11 User manual

Operating Instructions
www.foxunhd.com
FX-MX11
8x8 HDMI2.0 Matrix
Support 4K@60hz YUV4:4:4, 18Gbps, HDR
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
ABLE OF CONTENTS
Feature
Introduction
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Typical Application
Product Service
Warranty

Operating Instructions
www.foxunhd.com
Feature
HDMI 2.0 version (Support 4K@60Hz YUV4:4:4).
Support 3D
Bandwidth upto 18Gbps
HDCP 2.2 input,HDCP2.2 output
HDCP 1.4 input,HDCP1.4 output
Support HDR10
8xHDMI Input, 8xHDMI output with 8xSPDIF Audio
Any one of the 8 Ultra HD sources to any one of the 8 Ultra HD displays
Support Panel Button, Local IR, RS232 Control with command, IP Control, Web GUI Control
Support Dolby True HD and DTS-HD master audio
1U rack design, easy installment
Dimension (L×W×H):440x220x44.5mm
Net Weight:2.8kg.
NOTICE
Our company reserve the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
Warning

Operating Instructions
www.foxunhd.com
To reduce the risk of fire, electric shock or product damage:
INTRODUCTION
It is 4K HDMI Matrix 4x4, supports HDCP2.2. It offers HD video solution for super market, shopping mall;
HDTV, STB, DVD and projector factory; data control center; conference rooms; education and training;
luxurious house; home theaters etc.
SPECIFICATIONS
Operating Temperature Range
-5 to +65℃(+23 to +149℉)
Storage Temperature
-40°F to 158°F (-40°C to 70°C)
Operating Humidity Range
5 to 90 % RH (no condensation)
Video Input Connectors
8xHDMI Type A, 19-pin, female
Video Output Connectors
8xHDMI Type A, 19-pin, female
IR Ext port
1x3.5mm stereo jack
Resolution
480p@60hz,576P@50hz,720P@60hz,
1080P@24hz,1080P@50hz,1080P@60hz,4K@24hz,4K@
30hz,
4K@60hz YUV4:2:0, 4K@ 60hz YUV4:4:4
RS-232 serial port
DB9, female
1. Do not expose this apparatus to
rain, moisture, dripping or splashing
and that no objects filled with
liquids, such as vases, shall be
placed on the apparatus.
6. Clean this apparatus only
with dry cloth.
2. Do not install or place this unit in
a bookcase, built-in cabinet or in
another confined space. Ensure the
unit is well ventilated.
3. To prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct the
unit’s ventilation openings with
newspapers, tablecloths, curtains,
and similar items.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other apparatus
(including amplifiers) that produce
heat.
5. Do not place sources of naked
flames, such as lighted candles, on
the unit.
7. Unplug this apparatus
during lightning storms or
when unused for long
periods of time.
8. Protect the power cord
from being walked on or
pinched particularly at
plugs.
9. Only use attachments /
accessories specified by the
manufacturer.
10. Refer all servicing to
qualified service personnel.

Operating Instructions
www.foxunhd.com
Ethernet port (IP control)
RJ45, female
Rack-Mountable
Rack ears included
Power Consumption
19wtts
Dimensions(LxWxH)
440 x 220 x 44.5 mm
Mass (Main Unit)
2.8kg
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
PACKING CONTENTS
1Main unit. (FX-MX11)
21x12V DC Power Supply.
31x Remote controller.
41x IR Ext RX Cable;
51x mounting kit
61x CD for control software&Operating Instructions.
Notes: Please confirm if the product and the accessories and all in duded, if not please contact with
the dealers.
PANEL DESCRIPTION
Front Panel
①IR receive window.
②Input button IN1~8: choose the desired input port from ports 1~8.
③Output button OUT1~8: choose the desired output port from ports 1~8.
Rear Panel

Operating Instructions
www.foxunhd.com
①IP control.
②RS232 for control.
③For IR external receiver cable.
④SPDIF Audio output.
⑤DC power input.
⑥HDMI input port.
⑦HDMI output port.
Check the EDID Information by Panel button

Press “In4”for 3 seconds ,then press “In1”or “Out1” to check the EDID information for each HDMI input.
Press “In5” for 3 seconds, then press “In1” or “Out1” to check the device name , IP address and DHCP
status.
CONNECT AND OPERATE
1) Connect source devices to input ports of the matrix
2) Connect HDMI output ports to TV or other HDMI sink devices.
3) Optional: connect RS232 cable from PC RS232 port.
4) Optional: connect an Ethernet cable from the TCP/IP port on the matrix to a local area

Operating Instructions
www.foxunhd.com
network.
5) Connect 12V POWER supply to DC power socket.
6) Power on the matrix, HDMI sources and displays.
Attention: Insert / Extract cables gently.
Typical Application
Operation:
1) Remote Control Description
①Standby Mode.
②OUTPUT-X select INPUT-Y:
Press OUTPUT-X （X means 1 to 8 of outputs）
Press INPUT-Y (Y means 1 to 8 of inputs)
③All outputs select INPUT-Y:
Press ALL button in zone OUTPUT
Press INPUT-Y button (Y means 1 to 8 of inputs),
then INPUT-Y switched to ALL OUTPUTS.
④Cancel Button: Cancel the switching operation
⑤PTP button: Mirror all inputs and outputs
(Ex. Input 1 to output 1, input 2 to output 2, etc):
Press PTP button in Zone OUTPUT
Press O

Operating Instructions
www.foxunhd.com
2) RS232 Pin Assignment
Matrix
Remote Control Console
PIN
Assignment
PIN
Assignment
1
NC
1
NC
2
Tx
2
Rx
3
Rx
3
Tx
4
NC
4
NC
5
GND
5
GND
6
NC
6
NC
7
NC
7
NC
8
NC
8
NC
9
NC
9
NC
Baud Rate: 115200 bps
Data Bits: 8 bit Parity: None Stop Bit: 1 bit
Flow Control: None
3) RS232 Control
3-1) Software control
Connect the 8x8 Matrix to PC with a RS232 cable, open the software on your PC. On the COM Setting
session, select the COM port according to your PC and click Connect to get connected.
On this COM setting session, you can also change the Device name, Device name support up to 16
characters. Save or edit your status by clicking the Edit button.
Come to Port Set session to select or switch your input sources for each output, We can read the current
status by clicking the “Status” button, or Clear our historical operating record by clicking “Clear” button. The
right down blank shows the operating history.

Operating Instructions
www.foxunhd.com
Picture 1
The EDID session helps us to Read and Configure EDID for each input, such as HDR, 3D, Data rates and Audio channel.
Picture 2

Operating Instructions
www.foxunhd.com
The IP configure session helps to read and configure the IP address and MAC of the Matrix. Check DHCP if you want the
router assign an automatic IP for the Matrix.
Picture 3
The Net Config session allows us to configure the PC and Matrix in the same LAN with the IP Address and connection.
Click “Net config” → “Connect”→“Search Device”→“Sel Device Number” →“Connect”then you can see
the device name, it meas connect successfully.

Operating Instructions
www.foxunhd.com
Picture 4
You can also click “IE”, easy and click to enter into web.
Picture 5
The last session is System Config, which allows power ON/OFF or reset, default the Matrix.

Operating Instructions
www.foxunhd.com
Picture 6
4) Command Control
4-1). Open CommUart Assistant.
4-2). Comport setting:
Baud Rate:
115200 bps
Parity:
None
Data Bits:
8 bit
Stop Bits:
1 bit
4-3) Enter Port Command in Send options.

Operating Instructions
www.foxunhd.com
Picture 7
4-4) Command
Command
Function
Note
@W 04 00 01 02 03 ...#
PTP Function
Mirror all inputs and outputs
(Ex. Input 1 to output 1, input 2 to output 2, etc)
@W 50 #
Reboot
@W 51 #
Restore Factory Setting
@W 0F 00 #
Standby
00: Standby Mode
01: Cancel “Standby Mode”
4-5) Select HDMI input for HDMI output
Command
Description
00
Output1
01
Output2
02
Output3
03
Output4
11
Output5
12
Output6
13
Output7
14
Output8
04
All Output
00
Input1
01
Input2
02
Input3
03
Input4
04
Input5
05
Input6
06
Input7
07
Input8
E.g: @W 00 00 #: Ouput 1 display Input1

Operating Instructions
www.foxunhd.com
Ouput 1 Input1
4-6). EDID Setting
@W XX AA BB #:
Parameter Description:
XX for configuration of “INPUT EDID”
Command
05
06
07
08
15
16
17
18
Description
Input1
Input2
Input3
Input4
Input5
Input6
Input7
Input8
AA for selecting “Video Mode”
Command
00
01
02
03
Description
1080P
4K2K_30
4K2K_60(YC420)
4K2K_60(YC444)
BB for selecting belowing function
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
HDR
48Bit
36Bit
30Bit
7.1CH
5.1CH
2CH
3D
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
“1” : select the function, “0” : not select the function.
E.g: 11001001: HDR, 48Bit, 7.1CH, 3D
Chang Binary code “11001001” to hexadecimal format “C9”.
E.g: @W 05 03 C9 #
The EDID of input 1 is: 4K2K_60(YC444)、HDR、48Bit、7.1CH、3D.
5 Web Control
5-1）Connect the HDMI Matrix and PC to the LAN.
5-2）Open the PC tool (included in the CD).
5-3）Search the IP address of HDMI Matrix, please refer to picture 4 & picture 5.
5-4）Open the web browser and enter the IP address you searched, then you can set the function as below
pictures:

Operating Instructions
www.foxunhd.com
Picture 8: Port Setting Page

Operating Instructions
www.foxunhd.com
Picture 9: EDID Setting Page

Operating Instructions
www.foxunhd.com
Picture 10: IP Configuration Page
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the

Operating Instructions
www.foxunhd.com
manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes
may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit
is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our Company
(referred to as "the warrantor" ) will , for the length of the period indicated as below,
(Parts(2)Year ,Labor(90) Days) which starts with the date of original purchase ("Limited Warranty period"),
at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during
the warranty period. This Limited Warranty is extended only to the original purchaser and only covers
product purchased as new. A purchase receipt or other proof of original purchase date is required for
Limited Warranty service.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by
warrantor,or failures which result from accidents,misuse,abuse,neglect, mishandling, misapplication,
alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory
Service center or other Authorized Servicer, or damage that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images,

Operating Instructions
www.foxunhd.com
data or other recorded content. The items listed are not exclusive, but are for illustration only.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.