foxunhd FX-SDI-401 User manual

Operating Instructions
www.foxunhd.com
FX-SDI-401
4x1 SDI Switch &Repeater with Re-clocking Function
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
ABLE OF CONTENTS
Feature
Introduction
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Typical Application
Product Service
Warranty

Operating Instructions
www.foxunhd.com
Feature
Switch 4 SDI inputs to 1 SDI Monitor
Support SDI Standard :SD-SDI,HD-SDI, 3G-SDI
Single unit can transmit up to 120m/390ft (Beldon 1694A)
Re-clocking function capability---unlimited repeater connection
With mounting ears
Power consumption:2watts
Dimension (L×W×H):105x93x30mm
NOTICE
Our company reserve the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
INTRODUCTION
It is newest 4x1 3G SDI Switch&Repeater . It offers HD video solution for super market, shopping mall;
HDTV, STB, DVD and projector factory; data control center; conference rooms; education and training;
luxurious house; home theaters etc.
SPECIFICATIONS
Re-clocking Function
Yes
SDI Standards
SD-SDI, HD-SDI,3G-SDI
Supported Protocols
SMPTE 259M
SMPTE 292M
SMPTE 424M
Data Rates
270Mbps(SD-SDI), 1.485Gbps (HD-SDI),
2.97Gbps (3G-SDI)
Video Support
480i@60hz, 720p@50/59.94/60hz,
1080i@50/59.94/60hz,
1080p@23.98/24/25/29.97/30/50/59.94/60hz
SDI Signal Type
SMPTE-292M, SMPTE-259M, SMPTE-424M
Output Impedance
75 ohms

Operating Instructions
www.foxunhd.com
Cable Equalization
HD-SDI up to 120m
SD-SDI up to 200m
Unlimited repeater connection
Audio Sampling rate
48Khz
Impedance
75 ohms
Input
4x BNC [SDI]
Output
1x BNC [SDI]
Power Adapter
5V 1A DC
Power Consumption
2W
Dimension(LxWxH)
116x93x30mm
Operating
Temperature
-5 to +65℃(+23 to +149℉)
Storage Temperature
-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity
20~90% RH (no condensation)
Housing Material
Metal case
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
PACKING CONTENTS
1) 4x1 SDI Switch &repeater
2) 5V 1A DC power adaptor
3) Operating Instructions
Notes: Please confirm if the product and the accessories and all in duded, if not please contact with
the dealers.
PANEL DESCRIPTION

Operating Instructions
www.foxunhd.com
Panel
1) Source Selection
2) IR Extension receiver input
3) SDI output port
4) Indicator for DC
5) Indicator for signal
6) Power Input
7) SDI input 1~4
CONNECT AND OPERATE
1. Connect 4xSDI device equipped with SDI output to 4x1 SDI switch inputs.
2. Connect devices equipped with SDI input (e.g monitors or video processors) to the 4x1 SDI switch
output.
3. Plug power adapter into power jack.
Note:
1) .This item can also work with our HDMI to SDI converter and SDI to HDMI converter, 1x2 SDI splitter.
2) We suggest you use cable with Belden 1694A.
3) The distance depends on the quality of the SDI signal from the HD Camera source and also the coax
cable & connector.
Typical Application
1) Distribute 4 SDI input to 1 SDI output

Operating Instructions
www.foxunhd.com
2) Connect with FX-HSD1 and FX-SDH1
3）Repeater connection
Attention: 1) Insert/Extract cable gently.
2) Please don’t insert into or pull out HDMI Cable when power on. please connect Cable
only when power is off.
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.

Operating Instructions
www.foxunhd.com
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes
may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit
is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our Company
(referred to as "the warrantor" ) will , for the length of the period indicated as below,
(Parts(2)Year ,Labor(90) Days) which starts with the date of original purchase ("Limited Warranty period"),
at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during
the warranty period. This Limited Warranty is extended only to the original purchaser and only covers
product purchased as new. A purchase receipt or other proof of original purchase date is required for
Limited Warranty service.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER

Operating Instructions
www.foxunhd.com
damages which occurred in shipment, or failures which are caused by products not supplied by
warrantor,or failures which result from accidents,misuse,abuse,neglect, mishandling, misapplication,
alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory
Service center or other Authorized Servicer, or damage that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images,
data or other recorded content. The items listed are not exclusive, but are for illustration only.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.