Franklin QUIKSET 54089 User manual

CAUTION:
Adult assembly required.
AGES 8+
ITEM NUMBER:
TABLE TENNIS
For all your replacement part needs, please visit:
www.franklinsports.com/54089
54089
QUIKSET®
Made In China
Franklin Sports Inc.
Stoughton, MA 02072
Please visit
www.franklinsports.com/54089
for instructional video
--Small parts.
Not for children under 3 yrs.
CHOKING HAZARD

54089
54089-R54089-R54089-R
54089-R1 54089-R2 54089-R3 54089-R4
54089-R5 54089-R6
6
Nut
54089-R7
7
11 12
4
54089-R
54089-R 54089-R 54089-R 54089-R
6mm x 45mm Bolts 6mm x 25mm Bolts
11 12 13 14
8
8
4
13 14
8
15
16
16
40
17 18
8
Rep.part:54089-R8
4
15
9
15
10
X4
54089-R
9
54089-R
10
X4
plastic clips
Metal Washers
16
19
8
Rep.part:54089-R19
15 16 17 18
16
20
8
Rep.part:54089-R20
16
21
8
Rep.part:54089-R21
16
22
4
Rep.part:54089-R22
Corner Cap
Plastic Tubes Carrying Strap
For replacement parts:
Visit: www.franklinsports.com/54089
Email: [email protected]
Call: 1-800-225-8649
15
23
54089-R
23
X8
Leg Leveler Cap

ASSEMBLY INSTRUCTIONS
1. Find a clean, level place to begin the
assembly of your Table Tennis Table.
We recommend that two adults work
together to assemble this Table
Tennis Table.
2. Remove all the parts from the box and verify
that you have all of the listed parts as shown
on the parts list page. Carefully cut or tear the
four corners of the box so that the bottom of
the box can be used as your work surface.
GENERAL NOTE
PARTS NOTE
STEP 1
1Open the two Table
Halves (#1) as shown.
Unscrew the 4 Leg
Levelers (#4) to
retrieve the two
Support Bars (#2).
Remove the Metal
Posts (#3) and set it
aside for later
assembly.
ITEM#: 2
For replacement parts:
Visit: www.franklinsports.com/54089
Email: [email protected]
Call: 1-800-225-8649
x2
2x4
3x2
4x8
54089
1
4
3
2
4
2
44
3
PINCH HAZARD! KEEP HANDS CLEAR.
CAUTION:
PARTS NOTE
Open the Metal
U-Legs (#11) as
shown and attach the 4
Leg Levelers (#4).
Attach the Support
Bars (#2) to the leg
folding hinge as
shown.
Attach Plastic Clips
(#10) as shown.
Attach Leg Leveler
Caps (#23) as shown.
2 x4
4x8
10 x4
NOTE
Push up hinge to align the support bar to lock in.
11 x4
23 x8
STEP 2
4
2
11 11
10
23
23

PARTS NOTESTEP 3
2Adjust the Support
Bolt (#7) downward so
the head of the bolt
touches the frame.
Remarks: make
sure this process is
done on a flat surface.
Lock in Support Bars
(#2) using two 6mm
Bolts (#8).
Repeat the Support
Bar (#2) assembly on
both sides as well as the
other half of the table.
Assembly is completed
and you can now turn
table halves over.
PARTS NOTESTEP 4
Flip the Table Tops
(#1) and push
together. Adjust the
Leg Levelers (#4) until
entire table is level.
Insert Metal Posts
(#3) into side holes
and secure with
Washers (#9) and
Nuts (#6). Slide Net
(#5) over the posts.
ITEM#: 3
For replacement parts:
Visit: www.franklinsports.com/54089
Email: [email protected]
Call: 1-800-225-8649
5
3
3
1
YOU ARE NOW READY TO PLAY!
x4
1
1 x2
3 x2
4 x8
5 x1
4
6 x4
9 x4
support bolt
7 x4
8 x8
54089
2
9
7
8
6