Franklin MLS X-RAMP User manual

INSTRUCTION SHEET
MLS®SOCCER TRAI N E R
X-RAM P
14308
Franklin Sports Inc.
Stoughton, MA 02072
Made in China
For replacements parts call
1-781-341-5178 or 1-800-225-8649
OR visit www.franklinsports.com
©2011 MLS, MLS, the MLS logo, Major League
Soccer and MLS team identifications are
trademarks and copyrights of Major League
Soccer, L.L.C. All rights reserved.
Parts List:
Pre-Assembled
64
53
21
1211
78
13 14 15
10
9
1 PC
1 PC 1 PC
28 PCS
4 PCS 4 PCS
Pre-Assembled
Pre-Assembled
Pre-Assembled 1 PC
1 PC
1 PC
2 PCS
--Small parts.
Not for children under 3 yrs.
Adult Assembly Required

Assembly Instructions:
1) Remove all components from the package and confirm that you
have all of the parts listed.
FRAME ASSEMBLY:
2) Assemble the frame according to the diagram below.
FUNCTION:
The MLS X-Ramp has two sides designed for training.
Side 1: Curved Ramp
This side is designed to help train passing, trapping and heading by
returning the ball in a controlled “looping” manner.
In order to achieve the looping effect, kick the ball toward the
center of the trainer. The ball MUST remain on the ground and
kicked with force. The curved design and the tension in the netting
allow the ball to loop back to the player.
STORAGE:
To fold the unit for storage and travel, slide down the plastic guard
on the locking hinges located on both sides of the frame. Unclip the
latch to release and fold.
See images below.
Locking
Hinge
Note: Netting was removed to illustrate folding feature. The netting can
remain on the product when folding for storage.
Side 2: Rebound Wall
This is designed to be used with one or multiple players. Kick the ball
into the wall to practice “Give and go” training, one touch passing
and trapping skills.
NET ASSEMBLY:
3) The larger netting (Part 7) attaches to the curved side of the frame.
The smaller netting (Part 8) attaches to the flat side of the frame.
4) For the curved side of the frame, slide the corners of the netting
(Part 7) onto the corners of the frame. Attach the bungee cords
(Part 13) to the grommets on the netting (Part 7) and then to the frame
to secure.
5) For the rebound side of the frame, attach the bungee cords (Part 13)
to the grommets on the netting (Part 8) and then to the frame.
6) Use the ground stakes to secure and stabilize the item during play.
Place the ground stakes on each of the four bottom corners of the
frame. *Note: The ground stakes should attach to the frame only. Make
sure that the netting is not caught in the ground stake.
7
8
13
15
15
14
15
15
Keep hands and ngers clear
while pushing to fold soccer trainer. Failure to
observe this warning may result in loss of
ngers or other serious injury. Adult assembly
and supervision recommended.
3 5
4 6
1 2
9 10
11 12
11 12