Freelap FxChip BLE User manual

Tx Track Pro : Battery 3.7V 5Ah LiPo, rechargeable – 50 hours of training
LED Display : Battery 12V 8Ah LiPo, rechargeable
“High brightness” mode : 7h of training / “Low brightness” mode : 12h of training
For more information, please contact your
distributor. You can find the list on
www.freelap.ch/freelap-contact
FIND ALL THE INFORMATION ABOUT YOUR FREELAP
PRODUCTS AND OUR DOCUMENTATION ON OUR
WEBSITE : WWW.FREELAP.CH
© Freelap SA 2002 - 2019 - All rights reserved
Freelap is a registered trademark of Freelap SA.
FREELAP SA
Av. D.-Jeanrichard 2A - CH-2114 Fleurier - Switzerland
Phone : [phone] / E-mail : [email protected]
You can also receive your timing data on your connected smartwatch (Apple, Android or
Samsung) through the MyFreelap app. (See the corresponding manual : "Use of the Freelap
System with a connected smartwatch".)
BATTERIES
GET STARTED !
FxChip BLE : CR 2032 - 2’000 hours of training
Make sure Bluetooth and location are enabled on your mobile device.
Select FxChip BLE device type.
Open MyFreelap app.
The first screen you see is your “workout calendar”. It displays all your workouts,
from the most recent to the oldest.
Fill in the details, choose a start list and/or a distance template (optional).
And press “START”
You are ready to receive timing data !
Welcome to Freelap World!
Congratulation in thinking outside the box and
providing your team with a tool that will truly
maximize their training experience!
QUICK GUIDE
If the athlete is not wearing the mobile device : When the athlete is crossing the finish
transmitter, the mobile device should be at less than 50m from the transponder and at
a height of about 1m from the ground to respect the Bluetooth range.
Create your new workout by pressing the sign at the top.


FXCHIP BLE
Screw the screen onto its tripod (supplied).
Your FxChip BLE automatically transmit the data.
No manipulation is required.
Tx Track Pro
coded “Lap”
Tx Track Pro
coded “Start”
Start Intermediate Finish
Tx Track Pro
coded “Finish”
LED Display
The FxChip BLE must be attached to the bike
using the velcro tape.
It must be attached on the fork of the bike, positioned horizontally,
facing outwards.
LED DISPLAY
EXAMPLE OF USE
TX TRACK PRO
Place the Tx Track Pro on the ground on your track.
It is shaped like an arrow. Place the transmitter at the side of the track,
pointing the front of the arrow towards the track. The direction of the
arrow indicates an imaginary timing line.
Place your LED Display on the ground, after the finish transmitter at
a distance of 50 meters maximum.
When an athlete crosses the detection field of a finish
transmitter, the corresponding athlete's ID and his time are displayed on the
screen. The data is displayed until the next athlete passes.
> OTHER EXAMPLE : ability to time training in loop.
Press the "ON/OFF" button to turn on the screen.
50m max.
The FxChip BLE turns on automatically
when you move and turns off after 10
minutes of inactivity.
LET’S GET STARTED!
MYFREELAP APP
Freelap timing system is based on a
mobile app, so you will need to
download the MyFreelap app on
your mobile device.
Available on
DOWNLOAD AND INSTALL MYFREELAP APP
DOWNLOAD CREATE ACCOUNT ACTIVATION
LOGIN DONE!
Download the
MyFreelap app
on your mobile device.
Click on "Register" to
create your account: enter
your email and choose a
password
Go to your email
to confirm your registration
to MyFreelap app
Go back to the
app and log in.
Your app is now
ready to go!
SETTING UP YOUR FREELAP TIMING KIT IS FAST AND EASY!
To turn on the transmitter, simply press the “ON”
central button.
Press again the central button to select the
desired code : Start = start transmitter / Lap = intermediate transmitter /
Finish = finish transmitter.
Each press of the central button switches it to the next code. The LED of the
selected code lights up.