Freelap World User manual

BATTERIES
FxChip BLE : CR 2032 - 2’000 hours of training
TX Touch Pro : CR 2032 – replace yearly
TX Junior Pro : 2 x AA (LR6) alkaline batteries - 300 hours of training
Welcome to Freelap World!
Congratulation in thinking outside the box and
providing your team with a tool that will truly
maximize their training experience!
QUICK GUIDE
GET STARTED !
Make sure Bluetooth and location are enabled on your mobile device.
Select FxChip BLE device type.
Open MyFreelap app.
The first screen you see is your “workout calendar”. It displays all your workouts,
from the most recent to the oldest.
Create your new workout by pressing the sign at the top.
Fill in the details, choose a start list and/or a distance list (optional).
And press “START”
You are ready to receive timing data !
For more information, please contact your
distributor. You can find the list on
www.freelap.ch/freelap-contact
FIND ALL THE INFORMATION ABOUT YOUR FREELAP
PRODUCTS AND OUR DOCUMENTATION ON OUR
WEBSITE : WWW.FREELAP.CH
© Freelap SA 2002 - 2019 - All rights reserved
Freelap is a registered trademark of Freelap SA.
FREELAP SA
Av. D.-Jeanrichard 2A - CH-2114 Fleurier - Switzerland
Phone : [phone] / E-mail : [email protected]

fly-in
start
20 m
20.8 m
40 m
40.8 m
60 m
60.8 m

FXCHIP BLE
The FxChip BLE turns on automatically when you move and
turns off after 10 minutes of inactivity.
To turn on the transmitter, simply press the “ON” central button.
Place the Tx Junior Pro on the ground, 80cm after the desired distance.
(The transponder will detect the magnetic field 80cm before.)
The Tx Junior Pro can cover 2 lanes.
Flying START 30 meters
1st Tx Junior Pro 2nd Tx Junior Pro
START BLOCK 3 x 20 meters
Place the Tx Touch Pro on the ground on the start line.
Get ready on the start line and keep your thumb pressed
on the central button. The green LED lights up (2 seconds).
Then it starts flashing indicating to the athlete that the device is ready and that
the button can be released.
Release the button and start the race. Tx Touch Pro will emit a confirmation
beep and automatically start the FxChip BLE timer.
If two athletes use a Tx Touch Pro simultaneously on adjacent lanes, they must
each be placed on the furthest side of the other athlete, in order to not trigger
the FxChip BLE from the other lane (at least 1.5 meters between each Tx Touch
Pro)
The FxChip BLE must be attached to the athlete’s waist
using the clip or the Freelap belt.
It must be attached to the waist, centered in the alignment of
the navel and positioned vertically.
TX TOUCH PRO
TX JUNIOR PRO
EXAMPLE OF USE
Press again the central button to select the desired code :
Lap = intermediate transmitter / Finish = finish transmitter.
Each press of the central button switches it to the next code.
The LED of the selected code lights up.
LET’S GET STARTED!
MYFREELAP APP
Freelap timing system is based on a
mobile app, so you will need to
download the MyFreelap app on
your mobile device.
Available on
DOWNLOAD AND INSTALL MYFREELAP APP
DOWNLOAD CREATE ACCOUNT ACTIVATION
LOGIN DONE!
Download the
MyFreelap app
on your mobile device.
Click on "Register" to
create your account: enter
your email and choose a
password
Go to your email
to confirm your registration
to MyFreelap app
Go back to the
app and log in.
Your app is now
ready to go!
SETTING UP YOUR FREELAP TIMING KIT IS FAST AND EASY!