.
SETTING UP YOUR FREELAP TIMING KIT ISFASTAND EASY!
SWIM BELT & SWIM VESTTAKETHESTART
EXAMPLEOF USE
FXSWIM
Put onyour Swim Vest overyour Swim Belt.
Attach the belt to your chest withthe elasticband.
Moisten the electrodes of the belt.
The FxSwim transmits the data as soon as it detects the
heartbeats. If after 1min it has not detected anything, it turn off.
Wait 1min so that the electrodes detect the heartbeats. If
after 1min it has not detected anything, it will turn off
automatically.
To take the start, place yourself on the starting block and wait at least 10sec in
this zone. As soon as you leave the transmitter detection field, the stopwatch of
your FxSwim starts automatically.
> Example ina swimmingpool of 50m
> Example in a swimming pool of 25m
Turn onthe FxSwim by pressing the central buttonfor 2sec
(it flashes 3 times to signal the current ignition).
Place it inthe small pocket onthe back of your Swim Vest.
TX H2O PROFINISH
To switch on the transmitter simply press the "ON"
button until the LED flashes.
Place the TxH2O Pro onthe starting block.
Lap times over 50m
To turn off the FxSwim press the central button for 2 seconds. Then remove your
Swim Belt to stop sendingthe heart rate.
To view the detailed chart of your training: Press 3short presses on the FxSwim
button. From your mobile device, click on your workout and then on"Download"
and on"Chart".
Lap times over 50m
LET’S GET STARTED!
MYFREELAP APP
Freelap timing system is based on a
mobile app, so you will need to
download the MyFreelap app on
yourmobile device.
Available on
DOWNLOAD AND INSTALL MYFREELAP APP
DOWNLOAD CREATE ACCOUNT ACTIVATION
LOGIN DONE!
Download the
MyFreelap app
on your mobile device
Click on "Register" to
create your account: enter
your email and choose a
password
Go to your email
to confirm your registration
to MyFreelap app
Go back to the
app and log in
Your app is now
ready to go!
