SETTING UP YOUR FREELAP TIMING KIT IS FAST AND EASY!
FXCHIP
RELAY COACH BLE
TX GATE PRO
The FxChip turns on automatically when you move, and
turns off after 10 minutes of inactivity.
Plant a stake, on the start line. Attach your Tx Gate Pro to your
stake using its adjustable bands.
The stick should be placed at shins height, parallel to the ground.
Get ready on the start line, both shins just in front of the stick.
Trigger the start by crossing the gate.
It must be attached to the back of the boot, placed vertically,
and facing outward.
To turn on the Relay Coach BLE, simply press the “ON” button.
Screw the Relay Coach BLE to its tripod (supplied).
Place it on the ground, 1 meter behind your finish transmitter
(to 10 meters max.)
TX TRACK PRO
To turn on the transmitter, simply press the “ON”
central button.
NOTE: No “Power ON” button on the Tx Gate Pro.
This device only turns on a fraction of a second when the stick is activated (very low battery
consumption).
Press again the central button to select the desired code : Lap = intermediate
transmitter / Finish = finish transmitter. Each press of the central button
switches it to the next code. The LED of the selected code lights up.
LET’S GET STARTED!
MYFREELAP APP
Freelap timing system is based on a
mobile app, so you will need to
download the MyFreelap app on
your mobile device.
Available on
DOWNLOAD AND INSTALL MYFREELAP APP
DOWNLOAD CREATE ACCOUNT ACTIVATION
LOGIN DONE!
Download the
MyFreelap app
on your mobile device
Click on "Register" to
create your account: enter
your email and choose a
password
Go to your email
to confirm your registration
to MyFreelap app
Go back to the
app and log in
Your app is now
ready to go!
Place the Tx Track Pro on the ground on your course. It is shaped like an arrow.
Point the front of the arrow towards the course to draw your virtual finish line or
split. Place your transmitter directly on the snow at 3,5 meters max from where
athletes pass.
