Freeplay RADIANCE User manual

User guide / Instruction Manual
RADIANCE
Solar-Powered Lantern

See our entire product range: www.freeplayenergy.com
Freeplay Energy Ltd, 10th Floor, 6 Mitre Passage, Greenwich, London, SE10 0E
How the lantern works
The solar panel on top of the lantern absorbs sunlight and turns it into electricity. The rechargeable battery
inside the lantern stores that electricity for later use.
The lantern has a number of bright LEDs (1) that produce the light. There are three brightness settings that select
how much light is required. The brighter the light, the more electricity is needed, and therefore the sooner the
battery will be discharged.
A charging-indicator light (3) shines when the lantern is being charged. This also serves as a battery level
indicator (3).
The lantern has a USB output port (4). This can be used to recharge USB-compatible mobile phones, flashlights and
radios.
There is a micro USB power-input (5) that allows the lantern to be recharged from a USB cable.
The lantern has a light-flashing function operated by press-button (6) to attract attention in an emergency.
(In some versions this is connected to a siren).
The lantern is water and dust resistant.
RADIANCE SOLAR-POWERED LAN ERN
(3) Charging Indicator /
Battery Level Indcator
(1) Bright LEDS
(4) USB Output Port
(5) Micro USB Power Input
(6) SOS Flashing Light/
Siren Button
(2) Power On/Off Button
(7) Rubber Cover

Recharging the lantern
Place the lantern in the sun. For best results the solar panel
should be pointed directly at the sun, and this may require
the lantern to be tipped at an angle especially in the early
morning and late afternoon. The lantern is water resistant
but should not be left out in the rain.
The lantern has a micro USB port (5) under the rubber cover
(7). This may also be used to recharge the lantern battery.
After use, this rubber cover should always be kept firmly
closed.
The charging light (3) will shine when the lantern is being
charged, and the battery level will show (3).
Using the lantern
The bottom press-button (2) turns the lantern ON and OFF.
It also adjusts the brightness of the light. When this button
is pressed the battery level (3) is also shown.
The lantern may be hung by its handle (8), from a hook or
placed on a table.
The top press-button (6) operates the flashing light. This is
used to attract attention in an emergency. When pressed
the light flashes (and if fitted, a siren sounds).
Replacing the battery
The battery is accessed by removing the bottom cover of
the lantern (9). First remove the retaining screw (10) on the
underside of the lantern. Then twist the cover anticlockwise
(to the left). The battery is now visible. emove the clamp
and unplug the battery.
Recharging mobile phones and other
USB-compatible products
To recharge an external product there needs to be charge
in the lantern battery. Check this by turning the lantern
on/off (2) briefly.
There is a standard USB port (4) under the rubber cover.
Plug in a USB cable and connect to a phone. After use,
this rubber cover (7) should always be kept firmly closed.
(8) Carry Handle
(8) Carry Handle
(10) Screw
(9) Bottom Cover
User guide / Instruction Manual

Freeplay Energy Ltd, 10th Floor, 6 Mitre Passage, Greenwich, London, SE10 0E
SPECIFICA IONS
Power
Battery capacity 2 x2400mAh
Integrated Solar PV panel 2 Watt
Lighting
Light power (max setting) 2W
Light output (max setting) 230 lumens
Light output (medium setting) 100 lumens
Light output (low setting) 40 lumens
Performance (Full battery)
Shine-time at max setting 9 hours
Shine-time at medium setting 20 hours
Shine-time at low setting 66 hours
Daily Solar Run ime
High 3 hours
Low 19 hours
Charging mobile phones can reduce the daily runtime of lights.
Features
Mobile Phone charging Yes
USB-DC recharging Yes
Flashing light Yes
Siren Option
Number of LEDs 12
Weather and dust resistant IP62
Carry handle Yes
Customer replaceable batteries Yes
Battery level Indicator Yes
Charge indicator Yes
USB cable and phone-connector tips Option
Freeplay Warranty
Freeplay Energy Ltd, undertakes that, if within 2 (two) years of purchase, this product or any part thereof is proved to
be defective by reason of faulty workmanship or materials, we will, at our option repair or replace the same free of
charge for labour or materials on condition that:
The original invoice or sales document is presented together with the defective unit.
The complete unit is returned to the manufacturer or country distributor, postage paid.
The unit has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by
the manufacturer.
This warranty excludes damage caused by misuse or neglect.
See our entire product range: www.freeplayenergy.com
Freeplay Energy Ltd, 10th Floor, 6 Mitre Passage, Greenwich, London, SE10 0E