Freestyle SC-1003 User manual

S t o r a g e S o l v e d®
OWNER’S MANUAL
S t o r a g e

2
OWNER'S MANUAL
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Proper System Use . . . . . . . . . . . . . . . . . . . . . . . 4
Improper System Use . . . . . . . . . . . . . . . . . . . . . 4
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . 4
Keyed Locks . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Combination Locks. . . . . . . . . . . . . . . . . . . . . . . 4
General Maintenance . . . . . . . . . . . . . . . . . . . . . . . 5
ED3
Evidence Storage Lockers
OwNEr's MANUAL F r e e S t y l e ™L o c k e r s

3
Introduction
Designed and developed for secure locker
storage; with a modular design providing
exibility, achieved with a broad array of
internal accessories, features and options. All
FreeStyle lockers are built by Spacesaver to
be as rugged as our heavy duty evidence
storage locker systems. Locker
cabinets and doors are welded and
constructed out of 18 gauge
steel. They are built to last!
The purpose of this manual is
to provide basic information
necessary to use and maintain
your FreeStyle™ Locker
system. This document,
combined with your on-site
training, will provide you with
the ability to use your system
safely and efciently.
As the owner of a Spacesaver
/ FreeStyle Locker system,
you can be assured that you
have purchased the best
in the industry. Its quality,
safety, and ease of use are
unsurpassed. Together with
you local representative, we
stand behind our product
with an installation and
service team dedicated to
meeting your needs.
From all of us, thank you for
purchasing Spacesaver.
S t o r a g e

4
PROPER SYSTEM USE
Proper use of your system will ensure its longevity.
Below is a list of items/tasks that will help to ensure
that you get the most out of your FreeStyle™ Locker
system. Please familiarize yourself with these items
and establish a routine based on these guidelines.
1. Familiarize yourself with the content of this manual.
2. Ask questions if you are unsure of any operational
or safety features.
3. Bring any unusual performance of the system to
the attention of your supervisor.
4. Follow the operating instructions below.
KEYED LOCKERS
1. Each locker is keyed uniquely
2. Every job ships with a master key that works on all
of the locks on the job-site. Master key is provided
to the owner.
3. If a key is lost the master key can be used to open
the locker. Once the locker is open, the lock
number can be read from the back of the lock. The
user can then contact MasterLock™ to obtain a
replacement key.
IMPROPER SYSTEM USE
In order to maintain proper performance and safety,
please take the following precautions.
1. Do not lean against FreeStyle™ locker system.
2. Do not leave doors open and exposed to trafc in
the aisles.
3. Do not allow contents to hinder the proper closing
of the door or latching mechanisms.
COMBINATION LOCKERS
1. Refer to MasterLock™ materials shipped with
order for detailed installation and operational
information.
2. Each locker is given a unique combination (during
installation process).
3. Every job ships with a master key that works on all
of the combination locks on the job-site. Master
keys is provided to the owner.
4. If a combination is forgotten the master key can be
used to open the locker. Once the locker is open,
the lock number can be read from the back of the
lock. The information received from MasterLock™
contains the combination given to the lock
number.
Operation Instructions
OwNEr's MANUAL F r e e S t y l e ™L o c k e r s

5
General Maintenance
Once per month, check all the functions of the
controls (doors and locking mechanisms).
1. Where applicable, unlock the locker.
2. Swing open and close each door to ensure that
there is no binding in the hinge, or change in
how the door “ts” into the locker frame.
3. Where applicable, pull out and push in each
drawer to ensure that there is no binding in the
slides, or change in how the drawer “ts” into
the drawer frame.
4. Operate locking mechanism for proper latching
and unlatching.
5. If door, drawer or locking mechanisms do not
operate as expected please call your local
Spacesaver service representative.
•CLEANING/TOUCH-UP
1. Clean soiled surfaces with mild soap and water.
2. Touch up marred nishes with manufacturer
supplied, color matched touch-up paint.
S t o r a g e

Spacesaver Corporation is a division of KI.
KI is a registered trademark of Krueger International, Inc.
Spacesaver is a registered trademark of Spacesaver Corporation.
© 2010 KI and Spacesaver Corporation. All Rights Reserved. Litho in USA. SC-1003 SSC/SSC 01/10
Spacesaver Corporation
1450 Janesville Avenue
Fort Atkinson, WI 53538-2798
1-800-492-3434
www.spacesaver.com
KI
1330 Bellevue Street
P.O. Box 8100
Green Bay, WI 54302-8100
1-800-424-2432
www.ki.com