FREEWAY Agile Electric 3 Column User manual

Installation Guide
www.freewaydesign.net
Installation Guide - Electric 3 Column
Agile

Page 2
www.freewaydesign.net
Installation Guide - Electric 3 Column
Agile
Parts:
2 x L&R Leg Pair
1 x Cross Beam 1 x Cross Beam Cover 2 x Leg Beam 2 x Leg Beam Cover
1 x Drive Shaft
2 x L&R Support Bar Pair
4 x L&R Leg Rail Pair 4 x Cross Rail

Page 3
www.freewaydesign.net
Parts:
Installation Guide - Electric 3 Column
Agile
4 x Levelling Foot
2 x Handset2 x Power Supply2 x Power Cord 2 x Screen Bracket
24 x M8x10 2 x M8x20 4 x M5x15 20 x M5x1016 x M10x25 24 x ST5.0x23 4 x ST3.9x13

Page 4
www.freewaydesign.net
Step 1
Installation Guide - Electric 3 Column
Agile
16 x M8x10

Page 5
www.freewaydesign.net
Installation Guide - Electric 3 Column
Step 2
Agile
8 x M8x10

Page 6
www.freewaydesign.net
Installation Guide - Electric 2 Column
Step 3
Agile
4 x Adjustable Glide

Page 7
www.freewaydesign.net
Installation Guide - Electric 3 Column
Step 4
Agile
16 x M5x10

Page 8
www.freewaydesign.net
Installation Guide - Electric 3 Column
Step 5
Agile
4 x M5x12

Page 9
www.freewaydesign.net
Installation Guide - Electric 3 Column
Step 6
Agile
16 x M10x25

Page 10
www.freewaydesign.net
Step 7
Installation Guide - Electric 3 Column
Agile

Page 11
www.freewaydesign.net
Step 8
Agile
Installation Guide - Electric 3 Column

Page 12
www.freewaydesign.net
Installation Guide - Electric 3 Column
Step 9
Agile

Page 13
www.freewaydesign.net
Step 10
Agile
Installation Guide - Electric 3 Column
16 x ST5.0x22

Page 14
www.freewaydesign.net
Installation Guide - Electric 3 Column
Agile
Step 11
A
4 x ST3.9x13

Page 15
www.freewaydesign.net
Step 12
Agile
Installation Guide - Electric 3 Column
2 x M8x20

Page 16
www.freewaydesign.net
Step 13
Agile
Installation Guide - Electric 3 Column
4 x M5x15

Page 17
www.freewaydesign.net
Step 14
Installation Guide - Electric 3 Column
Agile
8 x ST5.0x22

Page 18
www.freewaydesign.net
Step 15
Agile
Installation Guide - Electric 3 Column

Page 19
www.freewaydesign.net
Completed
Installation Guide - Electric 3 Column
Agile

Page 20
www.freewaydesign.net
Agile
Directions For Use
IMPORTANT NOTES!
Prior to instalment, use and maintenance of the table frame, any installer and any user of the table must study this assembly and operation manual carefully, so
as to gain a complete understanding of its contents.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY
RESULT IN SERIOUS BODILY INJURY.
SAFETY AND WARNINGS
• This table complies with the prescribed safety regulations. Inappropriate use may cause damage to persons and table.
• Please read the operation manual prior to start using the table. It provides you with important information about safety, use, installation and maintenance of
the table, and thus protecting you and your children and avoiding damage on the table.
• Please guard this operation manual and pass it on to any future owner!
USAGE
• The electromotive, height-adjustable tables are designed for workstations in dry work environments only. The table height is infinitely adjustable, so that it can
be set to the most ergonomically suitable working level.
• They have not been designed for other purposes than those included in this manual, e.g. they are not to be used in areas of high humidity or dampness, nor
for lifting people. Any other use is at one’s own risk!
• Do not crawl, lie or move around under the table frame, and do not sit or stand on the table frame.
• CHILDREN should only use the table when supervised by adults.
• Liability: The manufacturer accepts under no circumstances warranty claims or liability claims for damages arising from improper use or handling of the table
frame other than that described in this operation manual.
SET UP AND INSTALLATION
When the table has been assembled (see assembly instructions on page 3-4) the adjustable feet are installed so that the table is level and does not shift. Then
the table is connected to the 110-230 VAC outlet and the table is ready for use.
• Make sure that no cables can get jammed.
• Place the table in a safe distance from window frames, radiators, furniture etc. so that people do not get stuck.
• Do not place any objects above 55 cm underneath the table.
• When moving the table after it has been assembled, the table top needs to be removed. The table CANNOT be lifted by the table top.