Fremont & Park 193D5597-53 User manual

MADE IN MALAYSIA
PARTS LIST :
CODE
A
LEG 1
LEG 2
LEG 3
TABLE
TOP
1PC
1PC
1PC
1PC
JCBC BOLT M6 x 40mm
SPRING WASHER M6x12mm
FLAT WASHER M6x13mm
ALLEN KEY
1
2
3
4
6PCS
6PCS
6PCS
1PC
COMPONENT QTY
HARDWARE LIST :
CODE COMPONENT QTY
1
It is recommended to install protective pads under all legs and supports to
avoid damage or scratches when placing furniture on a wood floor or
other hard surface, and to limit indentation and prevent discoloration
if placing on carpet.
Thank you for purchasing this product. Please take time to read and follow the instructions below.
Check that you have all parts and hardware before assembly.
DO NOT TIGHTEN BOLTS UNTIL COMPLETELY ASSEMBLED.
2
NOTE: HARDWARE PACK IN 5597-53.
PAGE 1 OF 2
ASSEMBLY INSTRUCTION
ITEM NO.: 193D5597-53 / 193D5597-53B
ROUND DINING TABLE
ITEM NO.: 193D5597-53#5

PAGE 2 OF 2
3 4
Protective
surface
A
1
4
23
5
6

PARTS LIST / LISTE DE PIÈCES :
CODE
A
B
C
CHAIR BACK
/DOSSIER DE
CHAISE
SEAT CUSHION
WITH FRAME
/ SIÈGE
FRONT LEG
/ PIED
1PC
1PC
2PCS
JCBC BOLT/BOULON
M6 x 80mm
JCBC BOLT/BOULON
M6 x 60mm
JCBC BOLT/BOULON
M6 x 45mm
SPRING WASHER
/RONDELLE D’ARRÊT M6x12mm
FLAT WASHER
/RONDELLE PLATE M6x18mm
ALLEN KEY/CLÈ ALLEN
1
2
3
4
4PCS
4PCS
3PCS
11PCS
COMPONENT QTY
HARDWARE LIST / LISTE DE QUINCAILLERIE:
CODE COMPONENT QTY
1
Thank you for purchasing this product. Please take time to read and follow the instructions below.
Check that you have all parts and hardware before assembly.
2
NOTE : ALL ABOVE LISTED ARE FOR 1 PC OF CHAIR.
6
145
6
3
4
5
A
C
4
5
2
6
B
ASSEMBLY INSTRUCTION / INSTRUCTION D' ASSEMBLANGE
ITEM NO.: 193D5597WTS
DINING CHAIR / CHAISE
511PCS
1PC
6
It is recommended to install protective pads under all legs and supports to
avoid damage or scratches when placing furniture on a wood floor or
other hard surface, and to limit indentation and prevent discoloration
if placing on carpet.
Il est recommandé de placer des coussins protecteurs sous tous les pieds et
toutes les bases des meubles pour éviter d’endommager ou d’égratigner les
planchers en bois ou autres surfaces dures, et pour limiter l’empreinte et
empêcher la décoloration quand les meubles reposent sur la moquette.
Merci d'avoir acheté ce produit . Veuillez lire et suivre les instructions ci-dessous.
Vérifiez avant le montage que vous avez toutes les pièces et fixations.
DO NOT TIGHTEN BOLTS UNTIL COMPLETELY ASSEMBLED.
NE PAS SERRER LES BOULONS JUSQU'À CE QUE LE MONTAGE SOIT COMPLETMENT TERMINE. MADE IN MALAYSIA
FABRIQUÉ EN MALAISIE