
U S I N G S T E P S
Charge: Make sure to charge the device for 6 hours
before use it.
1.
(Red light indicates charging, green light indicates
fully charged)
2. Clean: Make sure the skin has been cleaned and keep
dry when using the blackhead remover.
3. Before Use: Use a hot towel and place it on your face
for 3-5 minutes to open up the skin pores. You can also
use a facial steamer or use after bathing.
4. Using: According to your skin, choose the appropriate
probe and install it. Press the power button and choose
the power level (Oily/ Normal/ Dry) of suction force. Use
in sweeping motion 1-2 seconds long.
5. After Use: Wash your face with cold water immedialy
after use. After washing your face, you can put on a cold
pack or rub an ice cube on the face to tighten pores.
6. Clean: Properly clean the probe everytime after use
the sanitizer and to keep from blocking the filter. You
can clean the probe with 70% or less alcohol or wash with
soap and a wet washcloth.
*This product may not be suitable for thin, sensitive veins skin. Please
test on forarm before you use. If you are allergic or sensitive to the
vacuum technology, please don't use it.
*When using the product, please move its suction head in circular or
linear direction slowly on your skin. and make sure it stays no more than
2 seconds on an area. Otherwise it may hurt your skin.
Please note: