Frigidaire FFRU20F4V User manual

Started
WITH YOUR
FRIGIDAIRE 20 CU FT REFRIGERATOR
GETTING
Set your refrigerator temperature
It’s easy! When first turning your appliance on, adjust to
Recommended. To ensure safe food storage, allow the appliance to
operate with the door closed for at least 8 hours before loading it
with food. If necessary, we recommend you adjust the temperature
gradually, in small increments, allowing the temperature to stabilize.
YOU’RE IN CONTROL
1. For warmer temperatures, adjust the setting to Cold. For colder
temperatures, adjust the setting to Coldest.
2. The control can be left at the factory preset
(Recommended) or adjusted as desired.
3. If the temperature inside the cabinet increases, the red High Temp* light
will illuminate and the alarm will sound.
4. The Chill Boost* mode quickly drives the appliance to a colder
temperature and stays active for up to 24 hours before automatically
deactivating or being manually exited.
5. Pressing the Temp* button will allow you to scroll through the five
temperature settings from Cold (top) to Coldest (bottom), and then loop
back to Cold.
2
1
3
4
5
*Refer to your Use & Care Guide for detailed information.
BEFORE YOU START
Set up your refrigerator
Prior to using the refrigerator, make sure it is located on a floor that is level and
strong enough to support it fully loaded. Check out INSTALLATION in your Use &
Care Guide to see how to set the anti-tip bracket.
Before operating for the first time
Clean the inside of your appliance before using it. See the CARE AND CLEANING
section in your Use & Care Guide.
A19273401 (2002)

Take the first step to becoming a part of the Frigidaire family by registering
your refrigerator.
Look for the PhotoregisterSM icon on your registration card.
LET’S MAKE IT OFFICIAL!
PHOTOREGISTER
SM
QUICK CARE
A little love goes a long way
Wipe up any spills immediately and clean the refrigerator and
appliance compartments at least twice a year.
Easy-to-Clean, Smooth Exterior
Our smooth exterior finish wipes down more easily than
traditional textured finishes.
FAQs
What does the alarm or “buzzer sound” mean?
If the temperature inside the cabinet gets warmer, the High Temp alert will sound. It’s best to
make sure your refrigerator is on a level surface, and the door closes freely and with a proper
seal. Once you close the refrigerator door, leave it closed so the refrigerator temperature can
decrease. If this does not correct the issue, check your Use & Care Guide for information on
how to reset the alarm.
The refrigerator temperature is warmer than preferred. What’s wrong?
If the refrigerator temperature is warmer than you’d like, adjust the control to a colder
setting until the refrigerator temperature is satisfactory. Allow 24 hours for the temperature
to stabilize.
Why does my refrigerator make noise or vibrate?
If your refrigerator is vibrating or rattling, check the below:
1. Install the appliance on a floor that is level and strong enough to support a fully
loaded appliance. Adjust the anti-tip bracket. See “Setting the anti-tip bracket” in
the INSTALLATION section of your Use & Care Guide.
2. Check to see if the refrigerator is touching the wall. If so, move it slightly.
3. Remove any items that are on top of the refrigerator.
4. Check items inside the refrigerator. It is normal for items inside the refrigerator to vibrate
somewhat. If it seems they’re vibrating too much, try moving the refrigerator slightly.
Find more troubleshooting tips in the back of your Use & Care Guide.
here
FOR YOU
WE ARE
Want help?
Have a question? Need service?
frigidaire.com/1 [phone]
frigidaire.ca/1 [phone]
owner support