Frigidaire FHP10X60LS Guide

1
Parts supplied
No. Part Qty.
1Extension chimney 1
Washer (dia. 1/2”
x 1/4” x 3/64”)
4
M15/64” x 3/16”
4
2
Extension bracket 1
2
3
4
5
Installing the hood
Short screw
1/8" x 15/32"
Step 1:
•
Refer to the Use & Care Guide of range hood and
below chart of “Dimension A” , locate the upper
bracket to lower bracket to make the correct mount-
ing height above the cooktop. (fig. )
Desired range hood distance above a 36” high cook top
" "
"
A
*: Recommended mounting height
* *
10 Feet Ceiling height
Mounting height
13-25/32
29
"
*
30
"
12-25/32
31
"
11-25/32
"
*
32
"
10-25/32
"
33
"
9-25/32
"
34
"
8-25/32
"
35
"
36
"
7-29/32
"
6-25/32
fig. 1
1
Step 2:
•
Mount upper and lower bracket by securing 8
short screws and washers (19 and 12 in Use &
Care Guide ).
(fig. )
2
fig.
fig.
2
Step 3:
•
Mount the Extension bracket (2) on the bracket
assembly (Upper and lower bracket) with 4 sets
of nuts (4) and washers (3).
(fig. )
3
fig.
3
10 Feet Extension Kit-FHP10X60LS-Mounting Manual
Dimension A
Top of upper bracket
Top of lower bracket
6
4
nut
Span washer
(dia. 7/16” x
11/32” x 1/64”)
316902470 June 2011

2
fig.
Step 5:
•
(fig. )
5
Attach the exhaust duct. In the example below,
round metal duct furnace pipe has been used.
Add the duct tape to the metal duct furnace pipe
to insure a tight connection.
Step 4:
•Mount the bracket assembly to the ceiling with 4
sets of long screws and washers (10 ,11 in
Use &
Care Guide ).
Make sure the power cable for the range hood is
routed inside the bracket.
(
fig.
)
4
fig.
4
fig.
5
Step 6:
•
Place the lower and upper chimney on the bracket
assembly, and hold it up with screwdriver
(fig. )
6
•
Fix the extension chimney on extension bracket
Step 7:
•Push the range hood onto the lower bracket. And
fix them with 4 sets of nuts , span washers and
washers (13,14 and 15 in the
Use & Care Guide.)
(fig. )
7
fig.
7
Step 8:
•Connect the power cord
Connect the duct pipe to the collar
•
fig.
8
(fig. )
8
Step 9:
•Pull down the lower chimney
Fix the upper and lower chimney with 4 short
screws
(fig. )
•
fig.
9
fig.
6
910
fig.
10