FRIGOGLASS CL 950 WITHOUT CANOPY User manual

ENG CHI
CL 950
&
CL 950 (WITHOUT CANOPY)

ENG
User Manual
INSTALLATION/MAINTENANCE
用手册户
安装 / 维护
CHI

ENG
Table of Contents
1. Foreword ......................................................... 4
2. Technical description..................................... 4
2.1 General ............................................................ 4
2.2 Technical specifications ................................ 4
2.3 Physical Dimensions:..................................... 4
3. Installation....................................................... 4
3.1 Installation instructions ................................. 5
3.2 Adjusting the shelf ......................................... 5
3.3 Connection to the mains supply ................... 6
4. Maintenance.................................................... 6
4.1 Preventive Maintenance................................. 6
4.2 Cleaning........................................................... 6
4.3 Operation......................................................... 6
4.4 Replacing the LED tube light......................... 6
4.5 Cabin light operation...................................... 7
4.6 Changing the advertising plate of the
light box........................................................... 7
5. Service............................................................. 7
6. First Aid........................................................... 9
7. Warranty........................................................ 10
8. Figures........................................................... 10
CHI
目录
1. 前言...................................................................11
2. 技格术规 .............................................................11
2.1 概述...................................................................11
2.2 技参数术.............................................................11
2.3 构尺寸结.............................................................11
3. 安装...................................................................11
3.1 安装指导.............................................................12
3.2 架搁调节.............................................................12
3.3 主源接电连...........................................................13
4. 维护...................................................................13
4.1 防性预维护...........................................................13
4.2 清洁...................................................................13
4.3 操作...................................................................13
4.4 替换LED灯管......................................................13
4.5 箱内灯的开关........................................................14
4.6 更盖广告宣牌换顶传................................................14
5. 修维...................................................................14
6. 急救助措施紧........................................................16
7. 保质...................................................................16
8. 片图...................................................................16

ENG
4
1. Foreword
Thank you for purchasing this new Ice Cold Merchandiser (ICM) from Frigoglass.
Before using this unit please read the instructions below carefully. We want you to enjoy
the benefits of this cooler with trouble-free operation for many years. A well-maintained
Frigoglass ICM will help you increase your sales and profits.
2. Technical description
2.1 General
The merchandiser must be connected to a grounded mains outlet with a minimum fuse
rating of 10A. The outlet must be easily accessible for the purposes of installation and
servicing. During installation, other authorities may impose additional requirements in
respect of lighting, alarm equipment and similar.
2.2 Technical specifications
Rating voltage 240V~,50Hz
Total Volume 971L
Thermostat 0~ 7.2°C
Ambient Temp 5M2
Defrosting Automatic
Capacity 840 Cans (330ml)
2.3 Physical Dimensions:
Model Width Height Depth Weight
CL 950 1278 mm 2250 mm 765 mm 220 kg
CL 950 WITHOUT
CANOPY 1278 mm 2104 mm 765 mm 210 Kg
3. Installation
After unpacking, check the cabinet for any damage caused during transportation. In
the event of damage, please contact the forwarding company.
Allow the merchandiser to stand upright for at least 1 hour
prior to connecting to the mains supply. This gives the oil
time to run back to the compressor after transit and
installation.

ENG
5
3.1 Installation instructions
a. Always ensure that your merchandiser is installed on level floor. There are 2
adjustable feet at the front and back under the chassis. Please adjust until the
ICM levels. Check by using a spirit, if available.
Do not install the merchandiser under direct sunlight or near
heat sources
b. Install a 38mm spacer behind the unit to ensure a gap behind the unit for proper
air circulation.
Failure to comply with the instructions may result in high-
energy consumption and poor performance of the unit.
c. Mains connection: If the mains cord supplied is not long enough, do not use an
extension lead. Ask an electrician to fit a 10A (or 13A) mains socket closer to the
merchandiser. Never allow the merchandiser to be connected to an extension
lead on a permanent basis.
d. The merchandiser must stand upright for at least 1 hour after transportation and
prior to start up. (This gives the oil time to run back to the compressor after transit
and installation.)
3.2 Adjusting the shelf
To adjust the shelf first unload it, lift it and unclip the shelf clips (1). Move the shelf
clips. Place the clips in the desired position and reposition the shelf. Make sure that
the horizontal metal rods at the bottom of the shelf are between the front and back
shelf clips.

ENG
6
3.3 Connection to the mains supply
Connect the ICM to a 230V, 50Hz power supply on a min 10A fused & grounded
socket. Do not use extension cables. If the power cord is not long enough, either
install a new socket nearby or ask an authorized electrician to replace the cord with a
longer one.
4. Maintenance
Prior to any cleaning or maintenance procedure, unplug the
ICM!
4.1 Preventive Maintenance
1. Clean the condenser once or twice yearly using a vacuum cleaner.
2. Use mildly soapy water to clean the interior of the ICM. Use a window-cleaning
agent to clean the glass surface.
4.2 Cleaning
It is important to clean the merchandiser twice a year. In order to avoid mould
formation, odours, etc. product compartments must also be thoroughly cleaned. The
interior of the ICM has to be cleaned with a mild soapy cloth.
Remember to disconnect the mains from the socket before
cleaning the ICM’s interior or exterior.
4.3 Operation
Energy saving tips:
For energy saving and ICM’s better performance:
• Load your ICM at night-time so that the drinks are cold once you get there in the
morning.
• Store your back-up stock in a cool and/or dark place so that when reloaded, the
ICM will need much less time to cool them down.
• Wipe moisture off the products you place in the ICM.
• Avoid opening the door for long periods of time.
4.4 Replacing the LED tube light
Before replacing the LED tube light, unplug the ICM.

ENG
7
There are 4 LED tube lights in the ICM. One is located in the middle of the canopy and
two inside the cabin; one at the side and the other at the top. To replace the
fluorescent tube, do the following:
For the middle light inside the cabin:
•Unscrew the column-like lids which connect the ends of the tube light with the
bulb holder (2 pieces each for the upper and lower side).
•To remove the tube light (along with the lids), twist it slightly towards the cabin.
•Replace with new LED tube light and reposition the lids.
•Fix the lids in place by screwing them in (Fig. 1).
For the canopy light:
You can replace the LED tube-light with a new one by unscrewing it and removing the
advertising plate form the canopy (Fig. 2)
Insert the advertising plate of the light box.
For the cabin top light:
•Unsnap the transparent light-cover by unscrewing the bolt away from you. Now
you can access the tube light.
•Continue unscrewing the tube light until you see the pin. Remove the tube light
from the bulb holder.
•Install the new LED tube light and fix it into place.
•Re-install the transparent cover and screw the bolt (Fig. 3).
4.5 Cabin light operation
The switch for the light is located on the top of the evaporator plate of the light box.
Press to switch on/off all the tubes (Fig. 4).
4.6 Changing the advertising plate of the light box
•Pull the advertising plate off the canopy (Fig. 5).
•Insert the new advertising plate.
5. Service
PRIOR TO ANY CLEANING OR MAINTENANCE PROCEDURE,
UNPLUG THE ICM!
If the ICM is not functioning properly or is out of order, please check the following
before calling the authorized service provider:

ENG
8
FAULT POSSIBLE REASONS HANDLING
Power cord not plugged in. Plug it in.
The ICM does
not work. No power coming through
the socket. Check for fuse on the mains
Wrong EMS set point
Lower the set point as follows:
Press the "set" button, then
keep the “down" button
pressed until the you reach
the desired value, and then
press the "set" button again.
The ICM has recently been
reloaded with warm
products. It takes 11-18
hours to cool them down.
Preferably, reload the ICM
before night closing.
The ICM is loaded in such a
way that the air-circulation in
the interior is getting
blocked.
Load the ICM according to the
standards you have been
provided with by the company.
The condenser is blocked.
Dust has accumulated on the
condenser.
Clean the condenser using a
vacuum cleaner.
The door has been left open. Press the defrost button and
defrost manually.
The door does not seal
properly. Call a Service technician
The ICM does
not cool
properly. The
products are
warm.
Leakage in the cooling
system.
Repair the leakage (this type
of repair should be performed
by an authorized technician)
For this particular ice cold
merchandiser, a powerful
mechanism is needed and
consequently a certain
amount of noise cannot be
avoided.
Ice Cold Merchandisers are of
dynamic type, so a certain
amount of noise cannot be
avoided.
Intense metallic noise. Call a Service technician
The ICM
sometimes
makes noise.
Inclined or curved floor. Level the ICM properly by
adjusting its feet.

ENG
9
FAULT POSSIBLE REASONS HANDLING
The door has been left open. This feature is designed to
reduce the ambient air ingress
while opening the door.
Energy-saving mode during
the compressor off cycle.
This feature is designed to
save energy during the
compressor off cycle.
Evaporator fan
is not running
Others Call a Service technician
The drainage hose for
condensate water is out of
the tray. Call a Service technician
There is water
on the floor. There is a leakage in the
tray. Call a Service technician
The lights don’t
work. The light is switched off. Switch on the light.
If after all the above-mentioned checks the problem with your ICM remains, please
contact the customer service department of your supplier and provide the following
information:
• ICM Type
• ICM Serial number
• Brief description of the problem / observation
6. First Aid
The appliance uses refrigerant (R134a) for operation, which
under normal conditions is found in small amounts in the
refrigerating unit and it is not expected to cause danger in
case of leakage. However, high exposure levels to R134a can
cause loss of senses and asphyxia. Liquid drops can cause
burns and eye irritation.
In case of accident, proceed to the following:
ACCIDENT: IMMEDIATE ACTION:
Inhalation of refrigerant Take deep breaths of clean air. If necessary, oxygen
or artificial respiration must be provided.
The administration of epinephrine or similar drugs
should be avoided.
Contact with eyes Wash your eyes thoroughly with plenty of water for at
least 15 minutes and then consult a doctor
Contact with skin Rinse immediately with water.

ENG
10
7. Warranty
The appliance is covered by a warranty as this has been agreed upon sale.
8. Figures
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5