Frontage AVERY 154591 User manual

154591 –AVERY COFFEE TABLE TOP
Page 1of 3
F R O N T G A T E *
O U T F I T T I N G A M E R I C A ' S F I N E S T H O M E S
P:\MERCH\Quality Assurance\Product Assembly Instructions\

154591 –AVERY COFFEE TABLE TOP
Page 2of 3
F R O N T G A T E *
O U T F I T T I N G A M E R I C A ' S F I N E S T H O M E S
PART LIST : HARDWARE
TOLS NEEDED (INCLUDED)
T.1 ALLEN KEY
ASSEMBLY TIME NUMBE R OF PEOPLE TO INSTALL :
UNDER 30 MINUTES RECOMMENDED 2 PEOPLE
PRE ASSEMBLY INSTRUCTIONS :
1. Do not throw away packaging materials until the assembly is complete. Part might be accidentally
thrown away.
ASSEMBLY INSTRUCTION:
STEP 1 :
1a. Lay Top Table (A) on the floor with underside facing up. Use the packaging material to protect
the Top Table against the floor to avoid scratches. Figure 1a
1b. Attach the Table Base (B), Figure 1a
1c. Insert the 4 pcs of Allen Head Bolt (H1) and Spring Washer (H2) tighten it with the Allen Key
(T1), See Figure 1b, DETAIL 1
Part #
Description
QTY
H1 .
ALLEN HEAD BOLT M8 X 35 MM
4 pcs
H2 .
SPRING WASHER
4 pcs
Part #
Description
QTY
A .
TABLE TOP
1 pc
B .
TABLE BASE
(NOT INCLUDED)
1 pc
A
Figure 1a
DETAIL 1
Figure 1b
B
T1
H1
H2

154591 –AVERY COFFEE TABLE TOP
Page 3of 3
F R O N T G A T E *
O U T F I T T I N G A M E R I C A ' S F I N E S T H O M E S
ASSEMBLY IS COMPLETE
Let the table stand. To level the table on un even surface, the leveler can be adjusted as per
DETAIL 2
CARE & MAINTENANCE : Use mild detergent and water to clean. Store in dry, covered area when
not in use and at the end of the season. Occasionally check the nuts and bolts and re tighten if
needed. Wood is a natural material whose appearance will deteriorate when left outside. A finish
should be applied regularly to ensure that the wood is protected and to keep it looking at its best.
Frontgate offers a full range of professional solutions to help maintain the beauty of your teak. For
Information about teak cleaning products please visit our website at www.frontgate.com or call our
product Specialist at 1-800-537-8484.
Please contact one of Our Product Specialists for assembly assistance of questions at 1-800-537-
8484 or email [e-mail]. Specialists are available weekdays 8:00 a.m. to 8:00 p.m. EST or
Saturday 9:30 a.m. to 6:00 p.m.
DETAIL 2