FrontRow JUNO ITM-01 User manual

Installing the battery
1. Unscrew battery door on the back of the microphone using
the supplied Phillips head screwdriver.
2. Locate the charge contacts on the battery and on the micro-
phone (Fig 1).
3. Insert battery into compartment - battery contacts first (Fig 2),
then push the battery into place (Fig 3).
4. Replace battery door.
5. Charge battery overnight before initial use.
Battery Safety
Warning: To reduce risk of fire or burns:
• Donotusebatteriesthathavebeendroppedorotherwise
damaged.
• Donotattempttoopen,disassembleorservicethebatterypack.
• Donotcrush,punctureorshortexternalcontactsordispose
of in fire or water.
• Donotusebatteryifexposedtomoisture.Whenexposedto
moisture, red checked pattern of moisture indicator (Fig 1 )
will disappear.
• Donotexposetotemperaturesabove40°C(104°F)
• Replace only with the battery pack designed for this product.
ITM-01 User Guide
©2013FrontRowCalypsoLLC,FrontRowCalypsoandthenamesofFrontRowandCalypso
products are trademarks or registered trademarks of FrontRow Calypso in the U.S. and other
countries. Product specifications and accessories subject to change without notice.
RevD/1113/821-7359-001
Fig 1 Fig 3
Fig 2
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Donotusethisapparatus
near water.
6. Clean only with dry cloth.
7. Donotblockanyventila-
tion openings. Install in
accordance with the
manufacturer’s instructions.
8. Donotinstallnearany
heat sources such as
radiators, heat registers,
stoves, or other equipment
(including amplifiers) that
produce heat.
9. Donotdefeatthesafety
purpose of the polarized
or grounding-type plug.
A polarized plug has two
blades with one wider than
the other. A grounding
type plug has two blades
and a third grounding
prong. The wide blade or
the third prong are pro-
vided for your safety. If the
provided plug does not fit
into your outlet, consult an
electrician for replacement
of the obsolete outlet.
10. Protect the power cord from
being walked on or pinched
particularly at plugs, conve-
nience receptacles, and the
pointwheretheyexitfrom
the apparatus.
11.Onlyuseattachments/
accessories specified by
the manufacturer.
12. Unplug this apparatus
during lightning storms or
when unused for long
periods of time.
13. Refer all servicing to
qualified service personnel.
Servicing is required when
the apparatus has been
damaged in any way, such
as power-supply cord or
plug is damaged, liquid has
been spilled or objects have
fallen into the apparatus,
the apparatus has been
exposedtorainormoisture,
does not operate normally,
or has been dropped.
14. The apparatus shall not be
exposedtodrippingnor
splashing, and no objects
filled with liquids shall be
placed on the apparatus.
Important Safety Instructions
www.gofrontrow.com

Charging the ITM-01 Pendant Microphone
Charge your microphone in one of four ways:
• IMC-01universalmicrophonecharger(optional)
• USBcableconnectedtooneofyourJunoTower’schargejacks
• USBcableconnectedtoyourcomputer’sUSBjack *
• USBcableconnectedtoaUSBtoACpoweradapter
* NOTE - When charging from a computer USB port:
Ifusingalaptoponbatterypowerandthebatteryislow,theITM-01microphone
will not charge. It is recommended that you always have your laptop plugged in to a
power source when attempting to charge or program your microphone.
TheITM-01microphonewillnotchargefromalow-powerUSBjack.Ifyouarehaving
troublechargingfromaUSBjackonacomputerthatispluggedintoapowersource,
tryusingadifferentUSBjackonyourcomputer.
TheITM-01microphonewillnotchargeunlessyouhavefirstinstalledthesoftware
driversaspartoftheFrontRowMicrophoneSettingssoftwareapplication.Todownload
theapplication,visitgofrontrow.com/products/frontrow-juno.
If your microphone will not charge from one of the Tower charge jacks, and your Tower is
connectedtoacomputerviaaUSBcable,disconnecttheTowerfromthecomputertocharge.
IMPORTANT! To maintain proper charging when using the
IMC-01universalmicrophonecharger,occasionalycleanthe
charge contacts on the bottom of the microphone using a cotton
swab dipped in rubbing alcohol.
IMPORTANT! To ensure top performance and avoid equipment
damage, batteries should be charged at room temperature.
IMPORTANT! To ensure top performance and avoid equipment
damage, FrontRow recommends replacing rechargeable
batteries every three years.
IMPORTANT! Store the battery properly if it will be unused for a
period of more than 2 weeks.
1. Charge the battery in the microphone for at least 2 hours.
2. Remove battery from microphone, place it in its own bag or
envelope and store in a cool dry place.
3. Rechargebatterybeforenextuse.
Microphone Channels
Switching the microphone channel
1. Unscrew battery door using the
supplied Phillips head screwdriver.
2. Change the channel by moving
the switch between position 1 and
position 2.
Customizing the microphone channels
You can customize channels* and other features of your
microphoneusingtheFrontRowMicrophoneSettings
software application (free download from gofrontrow.com/
products/frontrow-juno).
1. Connect the microphone to your computer with the FrontRow
MicrophoneSettingssoftwareapplicationinstalled.
2. OpentheFrontRowMicrophoneSettingssoftwareapplication.
3. Click on the Channel Assignments button.
4. Using the dropdown choices on the right, assign the desired
channels to the switch positions and click OK.
*TheITM-01Pendantmicrophoneissetwithswitchposition1setto
JunochannelAandswitchposition2settoJunochannelB.Ifyouhave
theChannelExpansionmoduleinstalledinyourJunoTower,orifyouare
usingthemicrophonewithanotherFrontRowproduct(ProDigital,Lassoor
Symbio), you must program the switch positions so that your microphone
transmits on the appropriate channels for your receiver. See the channel
programmingguideinyourJunoUserGuideformoredetails.