FROST U4025 Install guide

U4026, U4028
HEIGHT 250
Fitting instruction
Montageanleitung
Monteringsvejledning
Monteringsvägledning
Montage hanleiding
Manuel de montage
UNU SHELF SYSTEM
Exclusion of liability
FROST accepts no liability whatsoever
for damage to persons or property that
occurs or has occurred as a result of
improper installation or maintenance,
particularly if the safety instructions
and other points to note listed are not
or have not been observed in full.
Warning and hazard notices
Improper mounting or use can lead to
accidents and serious injuries.
UNU SHELF SYSTEM HEIGHT 250
U4025, U4027
1
U4025-B
Material: Aluminium
Design: Bønnelycke mdd
Manufacturer: FROST A/S
600 mm 150 mm
155 mm 305 mm
250 mm
250 mm
300 mm
1000 mm
150 mm
155 mm 305 mm
250 mm
250 mm
300 mm
U4027U4025
U4028U4026
U4027-B
U4026-B U4028-B
U4025-W U4027-W
U4026-W U4028-W

A
B
C
D
E
F
G
H
12 11 10 9 8 7 6
60 mm
126 mm
80 mm
60 mm
80 mm
A
B
E
60 mm
2
A
C
B
D12 x 12 x
E
UNU SHELF - U4021, U4023 & U4036
The lower bracket should
only be mounted if the
shelf is installed in a public
area with risk of people
removing the shelf.
D
C
1
2
3
Cleaning and maintenance
Surfaces should be cleaned with a microbre
cloth, glass cleaner or other non abrasive and
gentle agents.
Attention:
Never use solvents or aggressive household
cleaners like bleach, acids (e.g. descalers) or
ammonia-based bathroom cleaner to clean
the product. Steel wool and hard brushes can
permanently damage the surfaceof the steel.

A
B
C
D
E
F
G
H
54321
3
A
C
B
UNU SHELF - U4022, U4024 & U4037
The lower bracket should
only be mounted if the
shelf is installed in a public
area with risk of people
removing the shelf.
1
2
3
C
D8 x 8 x
E
Cleaning and maintenance
Surfaces should be cleaned with a microbre
cloth, glass cleaner or other non abrasive and
gentle agents.
Attention:
Never use solvents or aggressive household
cleaners like bleach, acids (e.g. descalers) or
ammonia-based bathroom cleaner to clean
the product. Steel wool and hard brushes can
permanently damage the surfaceof the steel.
60 mm
126 mm
60 mm
AB
D
E
60 mm
280 mm
280 mm
A
B
C
D
E
F
G
H
12 11 10 9 8 7 6