FrSky OSD User manual
● +5: VCC +5V
● VID_GND: Video GND
● VID_IN: Video input (To Camera)
● VID_OUT: Video output (To VTX)
● RX: To FC TX
● TX: To FC RX
GND +5V RX TXVID_GND VID_IN VID_OUT
18 mm
Layout
19 mm
1.80 mm
1.80 mm
1.85 mm2.54 mm
Specifications
Model Name
OSD
OSD Mini
Dimension
19mm*18mm*3mm (L*W*H)
7mm*7mm*2mm (L*W*H)
Current consumption
38mA@5V
Operating Voltage
5V
3.3V
Weight
1.5g
0.3g
Parameter Configuration. (Take INAV for example)
Step 1: After connecting OSD, FC and VTX, open INAV software, select the corresponding UART, and
click save.
● G: GND
● VI: Video input (To Camera)
● VO: Video output (To VTX)
● RX: To FC TX
● TX: To FC RX
● 3.3V: VCC +3.3V
D
C
G
VI
VO
RX
TX
3.3V
GND
7 mm
1.25mm
7 mm
5.7mm
Introduction
The FrSky OSD (On-Screen Display) is a tool which can be used for connecting the gears between flight controller
and camera. The generated real-time data via OSD (such as RSSI, current, voltage, altitude, etc.) will be
programmed as an image to be superimposed on a screen picture, and ultimately transmitted to the goggle or other
devices for the video feed on the ground. FrSky also offer the alternative mini version for some customized usage.
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: [email protected]
01140149
Version
1.0
FrSky OSD/OSD Mini Manual
FrSky is continuously adding features and improvements to our products. To get the most from your product, please check
the download section of the FrSky website www.frsky-rc.com for the latest update firmware and manuals.
Step 2: Select OSD option for parameter configuration
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: [email protected]
01140149
Version
1.0
FrSky OSD/OSD Mini Manual
This manual suits for next models
1
