FS POEX1 User manual

Copyright © 2009-2022 FS.COM All Rights Reserved
1-PORT 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
1-Port 10/100/1000M Gigabit PoE+
Extender User Manual

1-PORT 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
Contents
1. Package Contents................................................................................................................................................................................ ......................
1
4.5 Wall-mount Installation.................................................................................................................................................................................... 6
4.6 Optional - DIN-rail Mounting........................................................................................................................................................................... 7
2. Product Features........................................................................................................................................................................................................ 1
5. Product Specifications............................................................................................................................................................................................... 7
3. Hardware Introduction............................................................................................................................................................................................ 2
4. Hardware Installation............................................................................................................................................................................................... 3
3.1 Product Outlook................................................................................................................................................................................................ 2
3.2 Ports Connection.............................................................................................................................................................................................. 2
3.3 LED Definition..................................................................................................................................................................................................... 3
4.1 Before Installation............................................................................................................................................................................................. 3
4.2 Connecting POEX1 to the Power Source Equipment (PSE)............................................................................................................... 4
4.3 Connecting POEX1 to the Powered Device (PD)................................................................................................................................... 4
4.4 Multiple PoE Extender Installation.............................................................................................................................................................. 5

1-PORT 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
1. Package Contents
Thank you for purchasing FS IEEE 802.3at PoE+ Extender, POEX1.
Open the box of the PoE+ Extender and carefully unpack it. The box should contain the following items:
lIEEE 802.3at PoE+ Extender x 1
lUser’s Manual x 1
If any of these are missing or damaged, please contact your dealer immediately; if possible, retain the carton including the original
packing material for future use in case there is a need to return it to us for repair.
2. Product Features
nCompliant with IEEE 802.3at Power over Ethernet Plus PSE and PD standard
nBackward compatible with IEEE 802.3af PoE
nComplies with IEEE 802.3/802.3u/802.3ab 10/100/1000BASE-T
nExtends the range of PoE by an additional 100 meters (328ft.)
nAutomatically detects and protects PoE equipment from being damaged by incorrect installation
nMultiple units allowed with daisy-chain installation support
nForwards both Ethernet data and PoE power to remote device
nNo external power cable installation required
nCompact size, wall-mountable design
nPlug-and-Play installation
1

1-PORT 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
3. Hardware Introduction
3.1 Product Outlook
3.2 Ports Connection
IN Port
Connect the PoE IN port of the POEX1 to any of the following 802.3af/802.3at/802.3bt PSE
devices like in this case a PoE injector through a CAT-5/5e/6 UTP cable:
lPoE injector
lPoE Injector hub
lPoE Ethernet switch
OUT Port
Connect the PoE OUT port of the POEX1 to the any of the following 802.3af/802.3at PD
devices or connect to the other POEX1 unit through a CAT-5/5e/6 UTP cable:
l PoE IP camera
l PoE VoIP phone
l PoE wireless AP
l PoE splitter
2

1-PORT 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
3.3 LED Definition:
LED
Color
Function
PoE IN
Green
Lit:
To indicate the port is receiving 52~56V (802.3at/802.3bt)/48V (802.3af) DC in-line power.
Off:
The remote device is not an IEEE 802.af/at/bt PoE PSE.
LNK/ACT
Green
Lit
To indicate the port is linked up at 10/100/1000Mbps.
Blink
To indicate that the extender is actively sending or receiving data over IN port.
PoE Out
Amber
Lit:
To indicate the port is providing 52~56V (802.3at) / 48V(802.3af) DC in-line power to
remote 802.3af/at PoE PD.
Off
To indicate the connected device is not a PoE powered device (PD).
4. Hardware Installation
This section describes the hardware features of the POEX1. Before connecting any network device to the POEX1, read this chapter
carefully.
4.1 Before Installation
Before your installation, it is recommended to check your network environment. If there are any far-away IEEE 802.3at/802.3af devices
that need to be powered on, the POEX1 can provide you with a way to supply power to this Ethernet device conveniently.
The POEX1 is installed between the PSE (power source equipment) and the PD (powered device); it is powered by PSE and forwards the
Ethernet data and remaining POE power to the PD. The POEX1 doesn’t require an external power supply and it can be installed easily by
means of plug and play, meaning the operator does not need to configure the POEX1. The POEX1 injects power to the PDs without
affecting the data transmission performance. It offers a cost-effective and quick solution to extend power and data by an additional 100
meters.
Note:
1. To provide you with a better PoE power and data extension quality, we strongly recommend you to use “Solid UTP Cable” when
installing the POEX1.
2. The POEX1 can be installed with a third-party device if the device is compliant with the IEEE 802.3at/802.3af standard.
3

1-PORT 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
4.2 Connecting POEX1 to the Power Source Equipment (PSE)
There are 2 RJ45 ports in the POEX1, of which the “IN” port functions as "PoE (Data and Power) input" and the “OUT” port on the
other side functions as "PoE (Data and Power) output".
Step 1: Connect a standard Cat.5/5e/6 UTP cable from a PSE, such as PoE switch, PoE injector hub or single port PoE injector, to the “IN”
port of the POEX1.
Step 2: The PSE delivers both Ethernet data and PoE power over UTP cable to the POEX1 and the “PoE IN” LED will be steady on.
Note:
1. The green POE IN LED means the POEX1 is being powered successfully with PoE class 0.
2. If the POE IN LED does not light up, check whether the cable connecting to a remote PSE, or the cable with a PC or a network device is
correct or not. Or check whether the wattage of power to an IEEE 802.3at /802.3af powered device is right or not.
4.3 Connecting POEX1 to the Powered Device (PD)
Step 1: Connect the additional Cat.5/5e/6 cable from the “OUT” port of the POEX1 to a remote PoE PD.
Step 2: The "OUT" port is a power injector that transmits data and power simultaneously between the PSE and PD.
Step 3: Once the POEX1 detects an IEEE 802.3at / 802.3af PoE PD device, the “PoE OUT” LED indicator will light up in amber to show it
is providing power.
4

1-PORT 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
Note:
1. If the connected device does not fully comply with the IEEE 802.3at/802.3af standard or in-line power device, the PoE OUT LED
indicator of the POEX1 will not be turned on.
2. According to the IEEE 802.3at/802.3af standard, the POEX1 will not inject power if the PD is not the said standard.
4.4 Multiple PoE Extender Installation
The POEX1 PoE+ Extender supports multiple units with daisy-chain installation. They can be employed in series for even longer
distances based on remote PoE IP Camera or PoE Wireless Access Point power requirement.
5

1-PORT 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
Note:
1.Each POEX1 can withstand a maximum of 2.6 watts. Check the total power consumption of your IEEE 802.3at/af PD and the POEX1
before you make the daisy-chain connection. If the overall power consumption is overloaded, the local PSE could shut down the whole
power system.
2. Each POEX1 provides an extended distance of 100 meters over the Cat.5/5e/6 UTP cable. Use of other non-standard cable could result
in unstable connection.
4.5 Wall-mount Installation
To install the POEX1 on the wall, please follow the instructions described below.
Step 1: Find the wall that you want to mount the POEX1 on.
Step 2: Refer to the picture below to screw the two screws on the wall. The distance between the 2 screws is 46.7mm and the line
through them must be horizontal.
Step3: Hang the POEX1 on the screws from the wall.
6

1-PORT 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
4.6 Optional - DIN-rail Mounting
There are two DIN-rail holes on the left side of the POEX1 that allows it to be easily mounted on the DIN rail. If the DIN-rail mounting is
opted, the DIN-rail mounting kit(RKE-DIN) has to be ordered as it is not included in the package. The following steps for DIN-rail
mounting are shown below:
Step 1: Screw the DIN-rail bracket on the POEX1.
Step 2: First put the upper DIN-rail bracket on to the rail shown below and then the lower bracket on to the rail to finish the mounting.
7

1-PORT 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
Step 3: Make sure the POEX1 unit is tightly fixed on the track.
5. Product Specifications
Cautions:
You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws would invalidate
your warranty.
POEX1
Hardware Specification
PoE In Port
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC” in
auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE Out Port
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC” out
auto MDI/MDI-X, auto-negotiation RJ45 connector
Switch Architecture
Store-and-Forward
Switch Throughput
10Mbps:14880pps@64Bytes
100Mbps:148810pps@64Bytes
1000Mbps:1488000pps@64Bytes
Maximum Frame Size
9K bytes
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Dimensions (W x D x H)
94 x 70 x 26 mm
Weight
189g
8

1-PORT 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
Protection
ESD (Ethernet): 2KV
Surge (EFT for power) : 2KV
Installation
Wall or DIN-rail mounting
Enclosure
Metal
Power Requirement
IEEE 802.3at PoE+ compliant with voltage within 52V-56V DC
IEEE 802.3af PoE compliant with voltage within 48V-51V D
Power Consumption
2.6 watts (system maximum) / PoE Output at maximum 36 wat
LED Indicators
• 1 x PoE IN (Green)
• 1 x LAN Data (Green)
• 1 x PoE OUT (Amber
Network Cable
10BASE-T: 4-Pair UTP Cat. 5 up to 100m (328ft)
100BASE-TX: 4-Pair UTP Cat. 5 up to 100m (328ft)
1000BASE-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m, 328ft)
Power over Ethernet
PoE Standard
PoE In Port
IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD
Per PoE Out Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
Backward compatible with IEEE 802.3af Power over Ethernet standard
PoE Power
PoE In Port 48~56V DC, max. 30.8 watts
Per PoE Out Port 44~52V DC, max. 26 watts
Power Pin Assignment
PoE In Port
11/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
Per PoE Out Port
1/2 (+), 3/6 (-)
Maximum Distance
500 meters with daisy-chain installation of 4 units
Standard Conformance
Regulatory Compliance
FCC Part 15 Class A, CE
Standard Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3x Flow Control
Environment
Operating
Temperature: -10 ~ 60 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Remark:
The actual distance of 100 meters could not measure up owing to voltage drop on the wire. In addition, the distance can be
compromised based on the quality of the UTP cable and environment.
9