Amped Wireless REA20 User manual

REA20
High Power 700mW Dual Band
AC Wi-Fi Range Extender
User’s Guide

REA20
USER’S GUIDE
1
CONTENTS
INTRODUCTION.....................................................................2
GETTING STARTED.................................................................3
LED Indicators............................................................................ 4
Back Panel Description.............................................................. 5
SETUP GUIDE.........................................................................6
Welcome to the Dashboard .................................................... 10
Scan for a Wireless Network ................................................... 11
Connecting to a Secure Network............................................. 12
Extended Network Settings (SSID and Security) ...................... 13
Connect to the new Extended Network .................................. 15
Setup Summary....................................................................... 16
5.0GHz WI-FI SETTINGS........................................................ 19
Home Network Settings (5.0GHz)............................................ 19
Extended Network Settings (5.0GHz) ...................................... 20
Security (5.0GHz)..................................................................... 22
Wi-Fi Protected Setup –WPS (5.0GHz).................................... 23
User Access (5.0GHz)............................................................... 24
Wireless Coverage Controls (5.0GHz)...................................... 25
Access Schedule (5.0GHz)........................................................ 26
Advanced Settings (5.0GHz) .................................................... 27
2.4GHz WI-FI SETTINGS........................................................ 29
Home Network Settings (2.4GHz)............................................ 29
Extended Network Settings (2.4GHz) ...................................... 30
Wi-Fi Protected Setup –WPS (2.4GHz) ....................................33
User Access (2.4GHz) ...............................................................34
Wireless Coverage Controls (2.4GHz) ......................................35
Access Schedule (2.4GHz) ........................................................36
Advanced Settings (2.4GHz).....................................................37
USB STORAGE......................................................................39
Local Sharing ...........................................................................39
NETWORK SETTINGS............................................................43
IP Settings ................................................................................43
Wired Port Routing ..................................................................45
MANAGEMENT FEATURES ...................................................46
Device Status ...........................................................................47
Network Statistics....................................................................49
System Clock............................................................................50
System Logs .............................................................................51
Upgrade Firmware...................................................................52
Save/Reload Settings ...............................................................53
TECHNICAL SPECIFICATIONS.................................................54
DEFAULT SETTINGS..............................................................56
TROUBLESHOOTING AND SUPPORT INFORMATION..............57

REA20
USER’S GUIDE
2
2
INTRODUCTION
Thank you for purchasing this Amped Wireless product. At Amped Wireless we strive to provide you with the
highest quality products through innovation and advanced technology. We pride ourselves on delivering
products that outperform and go beyond your expectations. If you have any questions please feel free to
contact us. We’d love to hear from you and thank you for your support!
Email: [e-mail]
Call: 888-573-8830
Web: www.ampedwireless.com

REA20
USER’S GUIDE
3
3
GETTING STARTED
Package Contents
Check to make sure you have all the contents within your package:
High Power 700mW Dual Band AC Wi-Fi Range Extender
Three Detachable 5dBi High Gain Antennas
Desktop Stand / Cable Organizer Power Adapter
Setup Guide
CD: User’s Guide, Installation Video, Setup Guide, Wi-Fi Analytics Android App

REA20
USER’S GUIDE
4
4
LED Indicators
(From bottom to top)
Power: Indicates when the Range Extender is powered on. The LED will remain on.
WPS: Wi-Fi Protected Setup activity. When the WPS mode is activated the Power LED
blinks as it awaits a connection.
5.0GHz Wireless Activity: Blinks rapidly when wireless data traffic is transmitted or
received over the wireless network.
2.4GHz Wireless Activity: Blinks rapidly when wireless data traffic is transmitted or
received over the wireless network.
Gigabit Wired Ports 1-5: Indicates when a networking device is connected to a wired
port on the back of the Range Extender. The LED will blink rapidly when wired data
traffic is transmitted or received.
USB Connection: Indicates when a USB storage device is connected to the USB port.

REA20
USER’S GUIDE
5
5
Back Panel Description
Antenna Connectors (1-3): RJ-SMA antenna connectors. Attach the included high gain antennas to
these connectors according to their respective numbers. (Mismatching the antennas with the wrong
antenna connector port will negatively impact wireless performance.)
USB Port: Attach USB storage devices, such as USB flash drives and external hard drives, for file
sharing.
Reset: Push down once to reboot the Range Extender. Hold down for 5-10 seconds to reset the
Range Extender back to factory settings.
WPS: Hold down for 3 seconds to enable WPS push button configuration.
Wired Devices: Gigabit RJ-45 ports for connecting to wired computers or network devices.
Power: Power adapter port. Output: 12V 1A, Input: 100-240v.

REA20
USER’S GUIDE
6
6
SETUP GUIDE
Find a Setup Location
The location of where you install the Range Extender is very important to how it will function. The optimal
setup location should be somewhere no more than halfway between your wireless router and your wireless
dead zone.

REA20
USER’S GUIDE
7
7
Attach the Antennas to their Specific Connectors on the Range Extender
Attach the three included Antennas to their corresponding numbers:
a) Antenna 1 (5.0GHz only) to Antenna Port 1
b) Antenna 2 (2.4 and 5.0GHz) to Antenna Port 2
c) Antenna 3 (2.4GHz only) to Antenna Port 3
Attaching the Antennas incorrectly may cause the Range Extender to not perform optimally

REA20
USER’S GUIDE
8
8
Connect your PC to the Range Extender
a) Attach the Power Adapter to the Range Extender’s PWR Port and an available power outlet.
b) Connect to the Range Extender's Wi-Fi network: Amped_REA20_2.4 or Amped_REA20_5.0

REA20
USER’S GUIDE
9
9
Open your Web Browser to Access the Web Menu
a. Open your web browser.
b. Type in: http://setup.ampedwireless.com
into the web address bar.
c. If the web menu fails to open, type in the
following IP address into your web address bar:
http://192.168.1.240
a. Disconnect your PC from all Wi-Fi networks
b. Attach an Ethernet cable between the PC and the Range Extender
c. Open your web browser and go to http://setup.ampedwireless.com again.

REA20
USER’S GUIDE
10
10
Welcome to the Dashboard
The Dashboard will provide you with the current status of the
Range Extender.
Click SCAN to find an available network to extend.
The diagram on this page displays the terms used to describe:
1) The network you are trying to extend (Home
Network).
2) The network that is rebroadcasted and extended
(Extended Network).
Study this diagram carefully as the terms used in the following
instructions will refer to these names.

REA20
USER’S GUIDE
11
11
Scan for a Wireless Network
The Scan result will list all available 2.4GHz and 5.0GHz wireless networks
detected by the Range Extender –including each network name (SSID), the
operating channel, the type of security and the signal strength.
If you are extending a dual band router, you will need to select the SSID of
your 2.4GHz network and the SSID of your 5.0GHz network.
The signal strength indicates the wireless connection between that
network and the Range Extender. It is important to choose networks that
are greater than 70%. A wireless network with a signal strength of less
than 70% may create a poor connection which results in slower throughput and frequent dropped
connections.
If you fail to find any wireless networks, or your signal strength is below 70%, try moving the Range Extender
closer to the wireless network that you are trying to repeat and click SCAN again.
Once you have selected your wireless network(s), click Next to continue. If you are only connecting to one
network, simply select that 2.4 or 5.0GHz network and click Next to continue.

REA20
USER’S GUIDE
12
12
Connecting to a Secure Network
If the wireless network(s) you are trying to repeat has wireless
security enabled, you will be prompted to enter a security key.
If you are repeating a dual band router, you will need to enter
the security key for both the 2.4GHz and 5.0GHz network. If
either network does not have security, leave the field blank.
After you have entered the security key(s), click Next to
continue.
If you do not know the key to the network you are trying to
repeat, then click Back and select another network.

REA20
USER’S GUIDE
13
13
Extended Network Settings (SSID and Security)
The default SSID of the Range Extender is
“Amped_Rep_2.4GHz” and “Amped_Rep_5.0GHz”
If you choose to "Clone" the settings from your Home
Network, the wizard will copy the SSID and security key of
your Home Network.
The SSID of the Extended Network will have a "_RE" at the
end of its name. For example: Home_Network_RE
You can also manually enter a new network ID and security
key. The new security key must be at least 8 characters
long.
Click Next to apply the settings.

REA20
USER’S GUIDE
14
14
Connection Check
DO NOT LEAVE OR REFRESH THIS PAGE
Allow the countdown to complete and the Wizard will
automatically redirect you to the next step.

REA20
USER’S GUIDE
15
15
Connect to the new Extended Network
During the countdown process, the Range Extender will reboot
and disconnect the Wi-Fi connection. At this point, you will
need to reconnect your PC or tablet to the new Extended
Network. Follow the instructions on the screen to connect to
the Extended Network.
Once you have connected, click the check box to confirm. The
Next button will appear allowing you to complete the setup
process.
If there are problems with your configuration, the Wizard will
inform you to rescan for a network to extend.
If there are no problems, you will see the Setup
Summary on the following page.

REA20
USER’S GUIDE
16
16
Setup Summary
Congratulations, the Range Extender is now successfully configured. Your
settings are now saved.
Print the Setup Summary details and save it for future reference.
If you have any wired devices that you would like to attach to the Range
Extender, you may do so now.
If you haven’t already positioned your Range Extender in an optimal location,
you may do so. All Range Extender settings are saved and can be safely
powered off for relocation.
Enjoy your Extended network!

REA20
USER’S GUIDE
17
17
Wired Port Routing
The Setup Wizard automatically selects the Home Network
(2.4GHz or 5.0GHz) your wired devices will be routed through
to connect to the Internet. If you wish to change this setting
you may do so from the web menu by accessing Network
Settings > Wired Port Routing

REA20
USER’S GUIDE
18
18
If the Home/Office Network connection fails try the following…
The failed connection page will provide you with information on why the connection failed. Read the
instructions carefully and retry your connection. The tips below will help to solve common issues:
a. Check to make sure your Home Network security settings are correct.
b. On the SCAN page, check that your Home Network is showing a signal of 70% or greater. If not, move
the Range Extender closer to your Home Network router and try again. If you are connecting to a dual
band router, ensure that both the 2.4GHz and 5.0GHz networks show a signal strength of 70% or
greater.
c. Check that your Home Network router’s DHCP server is enabled.
d. Try changing the channel of the Home Network router to a higher channel number and run the Setup
Wizard again.
e. Check the internet connection on your Home Network wireless router. Connect directly to your router
and attempt to access the web. If this fails, the problem is with your internet connection. Contact
your broadband provider to fix this issue first before configuring the Range Extender.
f. Try to reboot (unplug the power from the Range Extender and plug it back in) the Range Extender and
check to see if the connection is established (some networks may be very slow and take longer than
the allotted time for the Range Extender to successfully connect).

REA20
USER’S GUIDE
19
19
5.0GHz WI-FI SETTINGS
5.0GHz Wi-Fi Settings: Home Network Settings (5.0GHz)
The Home Network Settings (5.0GHz) page allows you to adjust
settings for your 5.0GHz Home Network connection. These settings
are for adjusting the Range Extender’s Home Network connection
after you have already gone through the Setup Wizard and wish to
adjust your current configurations.
Home Network SSID (5.0GHz): Manually enter the Identification
name of the existing 5.0GHz Home Network you wish to connect to.
Channel Number: Enter the channel number of the Home Network.
If the channel number does not match, a connection will not be
established.
Channel Width: Wi-Fi operates in two separate channel widths, 20Hz and 40Hz. 40Hz allows for faster speeds.
Each Channel Width will have a different selection of wireless channels to choose from. Select the channel
width you wish to use for your network. This setting must match that of your Home Network for a successful
connection.