FS MS 30-084-006-63 User manual

3 4
2
CAUTION :
1. Read this instruction manual and keep it for reference.
2. Adult supervision is required due to small parts.
3. Assemble on soft surfaces to prevent damage to the
product finish.
4. Recommended two people to assemble the product.
5. Estimated half hour for assembly.
6. Make sure all parts are included before assembly.
7. Call our toll-free customer service if needed.
ASSEMBLY TOOLS REQUIRED
PHILLIPS SCREWDRIVER
ASSEMBLY INSTRUCTIONS
10 lbs.
15 lbs.
15 lbs.
15 lbs.
PARTS AND HARDWARE
BEFORE YOU BEGIN, PLEASE FOLLOW ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
A
B
C
D
E
F
G
H
1
2
3
4
Part Name
Leg Frame 271 x 30 cm
38 x 29.5 cm
45.7 x 33 x 1.2 cm
38 x 26.5 x 21 cm
5.6 x 2.2 x 0.4 cm
6.9 x 2.2 x 0.14 cm
36.2 x 25.2 cm
0.5 x 2.8 cm
0.6 x 3 cm
1.3 x 0.35 cm
4 cm
4 cm
Metal
Metal
MDF
Plastic
Plastic
Plastic
Fabric
Fabric
Metal
Metal
Metal
Metal
3
1
12
2
2
3
3
4
12
1
1
Wire Shelf
Top Panel
Plastic
Washer
Locking
Caster
Caster
Non-Woven
Bin
Bottom Bin
Support
28mm
Screw
30mm Bolt
Allen
Wrench
Wrench
Size
Line-art
Drawing Quantity Material
Silver
Silver
Black
Black
Black
Black
Black
Black
Silver
Silver
Silver
Silver
Finish
UPC# 049696121323 MODEL: MS 30-084-006-63
Do you have any questions? Missing small parts or hardware?
If you need assistance with the assembly of your3-DRAWER
CART please e-mail our Customer Service Department at:
[e-mail] or call us at 1-800-639-3803
Please let customer service know:
1. You purchased this item from Wal-Mart
2. The item description is: 3-DRAWER CART
3. The item number is MS 30-084-006-63
4. The part number/letter and quantity needed
If you have this information ready, we will be able to process
your request promptly. Thank you
LOT# DATE PURCHASED________________
/ /
ITEM:
MS 30-084-006-63
Do not return to the store
STOP
THIS INSTRUCTION MANUAL CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
THIS INSTRUCTION MANUAL IS PRINTED ON RECYCLED PAPER
USING EARTH FRIENDLY SOY BASED INK.
3-DRAWER CART
Step 1.
Attach WIRE SHELF (B) to each LEG FRAME (A) using 30MM BOLTS (2)
and PLASTIC WASHERS (D) as shown.
Step 2.
Repeat STEP 1. Attach WIRE SHELF (B) to each LEG FRAME (A) using
30MM BOLTS (2) and PLASTIC WASHERS (D) as shown.
B Wire Shelf - 1 PC
D Plastic Washer - 4 PCS
2 30mm Bolt - 4 PCS
B Wire Shelf - 1 PC
D Plastic Washer - 4 PCS
2 30mm Bolt - 4 PCS
B
D
2
2
2
2
D
DD
2
D
B
D
2
2
2
D
D
This unit is intended for use only with
the products and maximum weights
indicated. Use with other products or
products heavier than the maximum
weights indicated may result in
instability causing possible injury.
Furniture can tip over or break if
improperly moved.

Step 4.
Attach LEG FRAMES (A) to TOP PANEL (C) using 28MM SCREWS (1)
as shown.
B Wire Shelf - 1 PC
D Plastic Washer - 4 PCS
2 30mm Bolt - 4 PCS
5
Step 3.
Repeat STEP 1. Attach WIRE SHELF (B) to each LEG FRAME (A) using 30MM
BOLTS (2) and PLASTIC WASHERS (D) as shown.
B
D
22
2
2
D
DD
C Top Panel - 1 PC
1 28mm Screw - 4 PCS
7 8
Step 6.
Unfold NON-WOVEN BIN (G) and put the BOTTOM BIN SUPPORT (H) into
NON-WOVEN BIN (G) as shown.
Step 7.
Repeat Step 6 to assemble the two remaining NON-WOVEN BINS (G) and
place them onto the shelves as shown.
This unit is intended for use only with
the products and maximum weights
indicated. Use with other products or
products heavier than the maximum
weights indicated may result in
instability causing possible injury.
Furniture can tip over or break if
improperly moved.
Do you have any questions? Missing small parts or hardware?
If you need assistance with the assembly of your3-DRAWER
CART please e-mail our Customer Service Department at:
[e-mail] or call us at 1-800-639-3803
FINISHED
To clean the 3-drawer cart, wipe with soft,
dry cloth. Apply a small amount of cleaning
solution to the cloth if required. Do not use
abrasive cleaners in order to prevent
scratching the surfaces.
H Bottom Bin Support - 3 PCS
G Non-Woven Bin - 3 PCS
GG
H
G
G
G
G
10 lbs.
15 lbs.
15 lbs.
15 lbs.
C
11
6
Step 5.
Attach CASTERS (F) and LOCKING CASTERS (E) to each LEG FRAME (A)
using WRENCH (4) as shown.
A Leg Frame - 2 PCS
E Locking Caster - 2 PC
F Caster - 2 PCS
4 Wrench - 1 PC
4
F
E
E
F
A
A