FSR AirShare DV-AS-21 User manual

DV-AS-21
AirShare Quick Reference Guide
See manual for full details
LIT1783
43381
FSR Inc. 244 Bergen Boulevard, Woodland Park, NJ 07424
[phone] Fax: [phone]
E-Mail: [email protected] · Web: http://www.fsrinc.com

3
What’s in the Box
ID Name
1 DV-AS-21 Base Unit
2, 7 Base Unit Mounting
Kit
3 Antenna Pair
4 WMT-MINI USB Stick
5 AC Plug Adapter Kit
6AC Power Adapter

4
ID Name Description
1 Front USB connector Used to update the software of the
AirShare.
Used for connecting a mouse or USB-
based touch screen to select local
HDMI Input, control the SETTING con-
guration and open the Help Page.
2 POWER button / back-
lit LED indicator
Powers the unit on and o󰀨 and indi-
cates power status of the AirShare
Base Unit.
NOTE: Applying power by connecting the Power adapter to the Air-
Share Base Unit will power the unit on without having to press the
Power button. The Power button can turn the unit o󰀨 or back on without
removing the Power adapter once it is connected.
Base Unit Front

5
ID Name Description
1 DC Power Input Connect the included power adapter to this
jack, and connect the AC plug to an avail-
able electrical outlet
2 LAN Ethernet port Connect an Ethernet cable between this jack
and a LAN to connect AirShare to LAN.
3 Front / Rear USB
connector
Connect mouse, touch screen, USB stick,
etc…
4 Reset Reset button to restore the factory default
settings
5 HDMI output Connect an HDMI cable from this port to an
HD display.
6 Line audio output 2 channel analog audio output. Connect a
3.5mm mini-jack from this jack to the Line In
jack of an audio system.
7 HDMI input Connect a local HDMI input, up to 4K_60Hz,
HDCP2.2 from a source device
8 Line audio input 2 channel analog audio input. Connect a
3.5mm mini-jack from this jack to the Line
Out jack of an external audio source de-
vices.
9 Antenna connec-
tion points
Screw the two included antennas into these
two ports
Base Unit Rear

6
1) Antenna connection points
(ID 9): Screw the two included
antennas into these two ports.
2) LAN Ethernet port (ID 2): Con-
nect an Ethernet cable to LAN
port on AirShare for hardwired
connection for internet access
and secured network.
3) Connect the other side of the
Ethernet cable to an LAN port
on the router for internet access
on local WIFI connections and
to connect to existing WIFI or
network infrastructure
4) Use Front or Rear USB con-
nector (ID 3 and ID 1 on front
or rear view) to connect your
mouse for performing setup. *The
mouse that is attached to the
AirShare Base Unit will have
limited functionality compared
to the mouse on the Modera-
tors PC or Laptop.
Base Unit Hookup

7
6) Connect the other side of the
HDMI cable to the HDMI output of
a source (up to 4K_60Hz)
5) Connect an HDMI cable to the
HDMI input (ID 7). Proceed to
number 7 if no secondary source
is being used in application
8) Connector the other side of the
HDMI cable to the HDMI input
port of the monitor.
7) HDMI Output (ID 5): Connect
an HDMI cable from this port to
an HD display.

8
9) Choose the correct adapter
from the AC Plug Adapter Kit
10) Insert the adapt plug into the
AC Adapter and slice it up to lock
it in place
11) DC Power Input (ID 1): Con-
nect the included power adapter
to this jack and connect the AC
plug to an available electrical
outlet. This will power the Airplay
on.

9
ID Name Description
1 SSID: (Service Set
Identier) Name
Displays the AirShare Base Unit SSID
name
2 PASS: (Password) Displays the password when connecting
to the WIFI SSID of the AirShare. Gener-
ates new password if desired.
3 WIFI IP address
LAN IP address
Displays the Corporate WIFI IP address
and LAN IP address of the AirShare.
4 Download Downloads launcher (PC software) from
the AirShare Base Unit to a empty USB
Stick
5 Information Toggles the visibility of the SSID/PASS/
IP information.
6 HDMI input Switches to the local HDMI input.
7 Settings Connect a mouse to either USB port and
click to open the “Settings” menu.
8 Help Access documents for installation, op-
eration or after sales support
9 Quick start for PC
operating system
Steps for how to transmit PC/Laptop
desktop onto the main screen.
10 Quick start for An-
droid/IOS operating
system
Steps for how to transmit smart mobile
devices either powered by Android or
IOS desktop onto the main screen.
AirShare Display Overview

10
Setttings Overview
Connect a mouse to either USB port and click the “Settings Gear Icon” to
open the “Settings” menu. The screen below will prompt for a password
that should be changed from the default “admin”. Once the password id
is entered, the main settings screen will appear.
NOTE: Always change the default Ad-
min password from “admin” to a unique
password in the Security setting menu .
Next, click on “Security Setting” to change
the Admin password: