Wunderbars Corner Frames User manual

Corner Frames from Wunderbars are a brand new
innovative product that allows you to hang images where
you would not have thought possible. Even if its an “inner”
or an “outer” corner, corner frames can brighten up any a
dull room corner with inspirational images. Further more
these frames can be used side by side with Wunderbars
Switch Frame for stunning wall corner panoramics.
For further information go to www.wunderbars.co.uk for
the full range of Wunderbars products.
“Outer” Corner Frame Assembly Instructions
7. Now that the card is firmly stuck to the
canvas peel the tape from the longest sides
8. Stick the card/canvas to the frame
1. Setup. Ensure that your frame is central
on the canvas.
2. Carefully remove the tape from one of
the longest frame sides ensuring to you
keep the frame central on the canvas
3. Once peeled stick the card to the
canvas
4. Ensure that the card is stuck neatly. 5. Peel the tape from card on the
opposite side of the frame and repeat
steps 2-4
6. Peel the tape from the card on the
short sides of the frame and stick to the
canvas. Repeat on opposite side
9. Peel the tape from the card short side
of the frame on both short sides.

10. Tuck the exposed canvas into the
corners between the card/canvas and the
frame as shown for both corners
11. Carfully lift the card/canvas and stick
to the frame, whilst ensuring the exposed
canvas is trapped between
12. Repeat for opposite side.
13. Staple the short sides’ canvas to the
frame
14. Staple all away across, ensuring that
you do not staple over the frames corner
joins. Repeat for opposite side
15. Staple the long sides canvas to the
frame, again ensuring not to staple across
the corner join
16. Staple up to the “V” on all sides 17. Your canvas should now look as
shown
18. Taking care, slowly fold the frame and
tuck any canvas inside as shown
19. Ensure the centre folds are neat on
the side that shows.
20. Place one side of the canvas frame
into the corner frame, ensuring an even
space around the image.
21. When folding over the top of the
frame check to ensure the flap in the V
does not push out

10. Firmly push the opposite side into
place on the frame
11. Check to ensure you have even spac-
ing around the corner frame
12. Congratulations you have made a
corner frame
13. Due to environmental conditions the
frame insert may become slightly loose.
Use the supplied Velcro loops to further
hold the insert in position
14. Wunderbars hangers are used for
hanging the frame (supplied separately)
15. Hangers slot onto the rear of the
frame
Printing Instructions
Image Size Total Image Size Crop Mark Size
Sizes in Inches Sizes in mm Sizes in mm
8” x 10” (each side) 410 x 259 494 x 343
10” x 12” (each side) 310 x 508 394 x 592
12” x 16” (each side) 411 x 609 495 x 693
13. Corner frames come in an innovative
box to protect them
14. Fold over your finished product 15. Slot into place and deliver to your
customer.