Func COOEE User manual

PAGE 1
ASSEMBLY GUIDE
2 Person Lift
CONTENTS FOR Cooee Tool Wall
x1 Mini Presentation
Wall
Tools you will need:
a.
Lay Mini Presentation Wall
on table.
b.
Hang bottom end off the table
to allow for base assembly.
Min 10”[254mm]
Overhang
x1
Mini Presentation
Wall
x8
3/8”
Flange Nut
x8
3/8” 3.5” Long
Hex Bolt
x16
3/8” Washer
15/16” Spanner Quick grip7mm SpannerTwo Person
Install
CAUTION
x16
M4
Flange Nut
x4
Metal Base
Plates
x2
Pen Tray
x4
Lockable
Castors
x16
M4 Countersunk
Bolts
• Clear open space for install
• May need need a sturdy table.
• + 65lbs lift required
COOEE
Mini Presentation
Wall
1
0

PAGE 2
ASSEMBLY GUIDE
a.
Lay metal base’s on Mini Presentation Wall.
b.
Clamp with quick grip.
Ensure Hole’s are aligned.
COOEE
Mini Presentation
Wall
2
a.
Insert countersunk bolts, castors and M4
Flange nuts then tighten with 7mm Spanner.
Repeat for all bolts
b.
Ensure all bolts and castor’s are secure
4
a.
Insert 3/8 bolt, Washer and Flange Nut.
Ensure all bolts are in the same direction
1
3
x8
4
2
4
2
1
3
Torque= 44.25Ft-Lb
b.
Clamp with quick grip. Tighten bolts in
order and repeat -to prevent one bolt
tighter than the other.
Ensure Hole’s are aligned.
3
x16

PAGE 3
ASSEMBLY GUIDE
a.
Lift Mini Presentation Wall onto the ground.
a.
Insert Pen Tray Acoustic PET
b.
Stand up and ensure Mini
Presentation wall is able to move
and castors can be locked.
COOEE
Mini Presentation
Wall
5
6
x1 Assembled
Mini Presentation Wall
2 Person Lift
x2