Draper AeroLift 150 User manual

Lifts &
Mounts

Draper Lifts & Mounts
for Video Projectors,
Plasma and LCD Flat
Panel Displays
Draper offers the most sophisticated, comprehensive and functional line
of lifts and mounts for video projectors and flatscreen displays. Seven
different models of motorized video projector lifts are designed to help
you mount the projector of your choice at or above the ceiling line. SMS
Projector Mounts enable ceiling installation of LCD/DLP projectors
and SMS Flatscreen Mounts allow wall or ceiling installation of
plasma/LCD displays with built-in adjustability.
• Revelation—This unique projector mount permanently conceals
the projector above the ceiling—and hides its noise as well. Page 3.
• Phantom—The Phantom conceals the projector above the
ceiling—and quickly dips into position when you are ready for a
show. Page 4.
• Orbiter—The Orbiter conceals the projector above the ceiling—
and smoothly rotates into position when you are ready for a show.
Page 4.
• Micro Projector Lift—Designed to fit within a    ceiling
grid system. Lowers the projector up to  with compact scissor
mechanisms. Page 5.
• Scissor Lift—The projector can be lowered as much as  from its
stored position. Page 6.
• LCD Lift—Compact projector lift with bomb bay door closure.
Page 7.
• AeroLifts—Projector lift series with simplified designs to install in
even the tightest spots. Page 7.
• SMS Projector Mounts—These ceiling mounts are sophisticated in
appearance, functional in their abilities and installer-friendly.
Page 8.
• Accuset Projector Mounts—Pipe-style, ceiling mounts address
almost any installation. Page 9.
• SMS Flatscreen Mounts for Light Weight Displays— Page 11.
• SMS Flatscreen Mounts for Medium Weight Displays— Page 12.
• SMS Flatscreen Mounts for Heavy Weight Displays— Page 13.
Important Questions to
Address When Choosing
a Projector Lift
Draper projector lifts offer the innovation, modern designs and range
of functionality to fit any room or auditorium. Before selecting a lift
for your application, take the time to ensure the product you want
best suits your projector and your space. The questions below will help
guide you to the perfect Draper lift solution.
• How large is the projector you are using? All Draper lifts are made
to fit a specific size range of projectors. Make sure to verify the
dimensions and weight of the projector you wish to use to ensure
you select the correct lift. Cable inputs also need to be considered in
the overall width and length of the projector.
• How far does the projector need to descend into the room? Several
Draper lifts place the projector just below the ceiling line while
others can descend a long distance. Generally, you should plan to
position the center of the projector’s lens at the same height as the
top of the screen’s viewing area. You will need to verify the exact
position of the projector with the specifications of your projector.
• How much space above the ceiling is available? (24˝of space allows
many different lift options) If your installation requires plenum
housing, verify that the lift you choose will fit into that space by
looking for the overall height of lift with the plenum option. If you
are not using a plenum housing, then you need to account for the
height of the lift, projector bracket, projector and closure panel.
Allowances for installation hardware and workspace will need to be
considered for any installation.
• Is the available space above the ceiling a plenum air return? If so,
then you would need to select a lift with plenum housing option.
Most commercial type installations will require a plenum housing.
• Does the lift have to fit within a 2´ x 2´ ceiling grid spacing? If
this is a concern then there are several lifts that will fit within this
scenario so you would not have to alter the ceiling grid work.
• What type of ceiling – acoustical tile or drywall? A ceiling access
door is highly recommended when installing in drywall type ceilings
or any ceiling where there is no other access to the outside of the
lift.
www.draperinc.com 765-987-7999
2

First surface mirror
Typical single
lens projector
(by others) Revelation
pan
Ceiling tile and hangers
(by ceiling contractor)
First surface mirror
White powdercoat
ceiling closure
Trim piece
Adjustable
projector
pan
(Light path continues
to projection screen)
Revelation
You won’t see or hear the projector.
The Revelation is totally different from traditional projector lifts
and mounts. The Draper Revelation permanently conceals the
projector—and its noise—above the ceiling at all times. Other lifts
typically lower the whole projector and lift mechanism into the
room from a ceiling recess, or lift it into the seating area from a table
hideaway.
You’ll be astonished by what you see—and don’t see—and don’t
hear—when your projector is mounted in a Revelation. You won’t
see or hear the projector—not before, during or after the show. You’ll
only see a hinged door in the ceiling, that quietly opens and closes.
Available in two models, Revelation A and Revelation B both
require only ⅝ of space above the ceiling, and both can be installed
to match a    ceiling grid, or used with reveal-style grid ceilings
(like Armstrong’s Silhouette-style grid system). Together, these two
models accommodate a wide variety of LCD/DLP projectors, includ-
ing those with offset lenses.
At the heart of the Revelation’s dual first surface mirror system is
two optical-grade glass mirrors that are 94% reflective. This mirror
system provides for optimum flatness and reflectivity.
Combine the Revelation with a ceiling-recessed Draper projection
screen and take your projection showmanship to a new level.
System Options
• Plenum Enclosure—Aluminum enclosure for use in return air
plenum. Includes intake and exhaust fan system with  couplers
for connection to ventilation ducts.
• Glass Shield—Made of anti-reflective glass and installed between
the Revelation and the first surface mirror/ceiling closure. Reduces
projector noise by an additional 80%, and prevents cigarette smoke,
grease or other harmful substances from reaching the projector.
Anti-reflective glass allows 97% transmittance of projected light.
• Ceiling Access Door—A    hinged door provides above-the-
ceiling access for maintenance or repairs without having to damage
the ceiling. Available with a white painted finish or recessed to
accept ceiling tile.
• Controls—Includes 1 wall switch. See website for other control
options at www.draperinc.com/go/Revelation.htm.
Dimensions & Data Model A Model B
Overall unit size (HWL) 13 x 38¼ x 3413 x 38¼ x 44
Required space above ceiling* 13⅝ x 38¼ x 34 13⅝ x 38¼ x 44
Clearance below ceiling approx. 17approx. 17
Rough ceiling opening for motorized door
(motorized door fits within 2´ x 2´ grid ceiling)
23½  23½ 23½  23½
Capacity 100 lbs. 100 lbs.
Door’s downward travel distance approx. 17approx. 17
Travel time 9 sec. 9 sec.
Net weight 85 lbs. 90 lbs.
Projector space (HWL)—To fit within parameters of inner pan. Planning sheets
available on our website at www.draperinc.com/go/Revelation.htm.
*13⅝ is overall height of Revelation with plenum housing. (13 without plenum).
www.draperinc.com 765-987-7999 3
Revelation projector mount and Access Series E projection screen. DTE Energy
Executive Dining Room, Detroit, MI. Dealer: City Animation, Troy, MI.
Photography by Wayne Williams, Indianapolis, IN.

Dimensions & Data Model A Model B
Overall Size (w x l x h) 17⅜  259⁄16  141⁄4 215⁄16  323⁄4  173⁄4
Overall Size w/Plenum 173⁄8˝x 271⁄2˝x 151⁄4 215⁄16”x 35˝x 181⁄2
Ceiling Cutout Size (w x l) 163⁄4  163⁄4 203⁄4  203⁄4
Net Weight of Unit 18 lbs. 27 lbs.
Lifting Capacity 26 lbs. 26 lbs.
Maximum Projector Width 13 16⅞
Maximum Projector Height and Length—see website for
compatibility chart at www.draperinc.com/go/Phantom.htm.
The totally unique Phantom is a clever alternative to other projector
lifts. It quickly and quietly dips the projector out of the ceiling and into
the “show” position at the touch of a switch or wireless transmitter. The
audience will think it materialized like an apparition.
When activated, a trapdoor lowers the projector into your room using
a precision actuator. The projector is easily aligned during installation
to provide a direct light path onto your Draper projection screen.
Phantom positions the projector just below ceiling line.
Fine-tuning the limit settings and tilt adjustments is easy. Plus, the
Phantom is supplied with a universal bracket that allows for easy
attachment of a variety of projector models and a ceiling closure panel.
Two models to choose from, as determined by size of projector.
System Options
• Plenum Enclosure—Aluminum enclosure for use in return air plenum.
• Ceiling Access Door—2´ x 2´ hinged door provides above-the-ceiling
access for maintenance or repairs while preventing ceiling damage.
Available in white finish or recessed to accept ceiling tile.
• Controls—Includes 1 wall switch. See website for other control options
at www.draperinc.com/go/Phantom.htm.
Orbiter
You won’t see the
projector until it
orbits into place.
The Orbiter is an exciting
projector mounting solution.
This totally unique lift
conceals your projector above
the ceiling and quickly rotates
it into the “show” position
at the touch of a switch or
wireless transmitter.
Ingenious design allows the
Orbiter to fit in small ceiling
spaces. Fine-tuning the limit
settings and tilt adjustments
is no problem for the installer.
The Orbiter is supplied
with a universal bracket that
allows for easy attachment of
a variety of projector models
and a ceiling closure panel.
Two Orbiter models to
choose from, as determined by size of projector.
Operated by optional IR or RF remote control, standard wall
switch, or integrated into your control system, Orbiter will add
a touch of class and sophistication to any room. Add the angled
ceiling adapter to install the Orbiter into angled ceilings and
even walls for projectors, video conferencing cameras, or other
equipment.
System Options
• Plenum Enclosure—Aluminum enclosure for use in return air
plenum.
• Angled Ceiling Adapter—Allows Orbiter to be installed into
angled ceilings or even into walls.
• Ceiling Access Door—2´ x 2´ hinged door provides above-the-ceil-
ing access for maintenance or repairs while preventing ceiling dam-
age. Available in white finish or recessed to accept ceiling tile.
• Controls—Includes 1 wall switch. See website for other control
options. www.draperinc.com/go/Orbiter.htm.
Dimensions & Data Model A Model B
Overall Size (w x l x h) 23  259⁄16  14 27  29½  16
Overall Size w/Plenum 23˝x 285⁄8˝x 14 27˝x 329⁄16˝x 16˝
Ceiling Cutout Size (w x l) 18⅞  20¾ 22¾  24¾
Net Weight of Unit 33 lbs. 37½ lbs.
Lifting Capacity 26 lbs. 26 lbs.
Maximum Projector Width 17 20⅞
Maximum Projector Height and Length—see website for
compatibility chart at www.draperinc.com/go/Orbiter.htm.
Phantom
Hiding in the ceiling, only to reveal itself
at just the right time.
www.draperinc.com 765-987-7999
4
Harmony Interiors Phantom installation, featuring custom ceiling closure.
Photography © Scott Arthur, Weaverville, NC. U.S.

Micro Projector Lift
Designed for today’s smaller projectors.
The Micro Projector Lift (MPL) is small and convenient, just like the
projectors it is designed to accommodate. Weighing only 35 pounds, it can
be installed in an existing    ceiling opening without disturbing the
ceiling framework. The projector’s “show” position can be set at any point
with infinite adjustability, up to  extension.
The Micro Projector Lift utilizes the same exclusive 3-scissor design
as Draper’s popular Scissor Lift (see page 6), but features a compact
side-folding scissor. The load is lifted by two  wide Kevlar® straps. Safety
belt provides extra protection. Closed height of lifting unit is only  tall
(not including projector, mounting mechanism or closure), so a minimal
amount of overhead ceiling space is required.
System Options
• Ceiling closure panel—White closure panel is optional and can also be
adapted to attach ceiling tile to match surrounding ceiling. Ceiling closure
panel option shown in photos at right.
• Plenum housing—Height varies according to choice of projector. Overall
height of plenum is adjustable. Includes ceiling trim ring. Does not
include ceiling closure panel.
• Ceiling finish kit—Ceiling closure panel and ceiling trim ring to finish
ceiling opening.
• Projector mounting bracket—The Low Profile Mount is described
below. Projector may also be mounted flush to bottom pan.
• Factory installed cables for Video and Projector Control.
• Ceiling access door—A  x  hinged door provides access to the
MPL above a finished
ceiling for maintenance
or repairs without having
to damage the ceiling.
Available with a white
painted finish or recessed
to accept ceiling tile.
• Controls—Includes
1 wall switch. See website for
other control options.
www.draperinc.com/go/MPL.
htm
Dimensions & Data—Micro Projector Lift
Height of lift in closed position 15
Overall lift dimensions (W x L) 21 x 20¾
Ceiling opening 23½ x 23½
Optional plenum housing (trim edge to trim edge) 223⅞ x 23⅞
Max. projector size (W x L) 320 x 20
Max. down travel 4
Capacity 4 35 lbs.
Capacity with Low Profile Mount 26 lbs.
Net weight of lift 35 lbs.
Amperes 51.2
1 Not including projector, mount/bracket or optional closure. Optional
Low Profile Mount adds 4⅞ to unit height (including Universal
Projector Bracket).
2 Max. plenum height: 205⁄8. Min. plenum height: 125⁄8
3 Max. available projector/bracket height (with Plenum): 13½,
Min. available projector/bracket height (with Plenum): 5½
4 Does not include allowance for closure panel. Closure panel weighs 10 lbs.
5 Does not include any load placed on MPL’s pre-wired power cable.
Kevlar® is a registered trademark of DuPont.
3
3
/ 8 "
*47/8"
3/16"
23/4"
5/16"
3/8"
215/16"
35/8"
33/8"
Low Profile Mount
Fixed mount for “low profile” ceiling
installations with our Universal
Projector Bracket for projectors
weighing less than  pounds. Places
top of projector only ⅞ from ceiling
(*may vary slightly according to choice
of projector). Ball joint adjusts infinitely
up to ° pitch, ° roll and ° yaw. The
SMS Low Profile Mount may be used
in most Draper projector lifts.
21" 20¾"
Min. 5"
Max. 53"
Varies with
projector/bracket
and room
conditions
www.draperinc.com 765-987-7999 5
MPL installations, both featuring optional ceiling closure.
Photography by Wayne Williams, Indianapolis, IN. U.S. Patent Nos.
D395,909 and 6,637,711. Other patents pending.