FSR PWB-450-MMS User manual

FSR 244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: [phone] - Fax: [phone]
43228 LIT1581
REMOVE COVER AND RETAIN COVER AND SCREWS
FOR REINSTALLTION.
1. 2. REMOVE RIM AND RETAIN RIM AND SCREWS FOR
REINSTALLTION.
DETERMINE EQUIPMENT LOCATION AND INSTALL
MOUNTING BRACKET.
4.
REMOVE BOTTOM INTERFACE PLATES AND DISCARD.
3.
PWB-450-MMS CRESTRON BRACKET KIT INSTRUCTIONS
COVER
(4) COVER SCREW
RIM
(4) RIM SCREW
BOTTOM
INTERFACE
PLATES
#6-32 x 1/4" LONG
PAN HEAD SCREW
(2 OR 4 REQUIRED
DEPENDING ON
MOUNTING
LOCATION)
MOUNTING BRACKET
7 MOUNTING BRACKET
HOLES LOCATED ON TOP
AND BOTTOM. 6 POSSIBLE
BRACKET LOCATIONS.

5. INSTALL UNIT ONTO MOUNTING BRACKET AND MAKE
ELECTRICAL CONNECTIONS AS REQUIRED. IT MAY BE
NECESSARY TO MAKE SOME CONNECTIONS TO THE
UNIT BEFORE INSTALLING IN BOX. CARE SHOULD BE
USED DURING INSTALLATION TO PREVENT DAMAGE
TO CABLES/WIRES.
6. REINSTALL RIM.
UNIT
#6-32 x 1-1/4" LONG
PAN HEAD SCREW
(2 OR 4 DEPENDING
ON MOUNTING
LOCATION)
RIM
(4) RIM SCREW
REINSTALL COVER.
7.
COVER
(4) COVER SCREW