FUJIDENZO SUP-142A User manual

Showcase Chiller

SUP-142A
Features:
•14 cu.ft Upright Chiller
•400L Capacity
•Digital Temperature Control for more accurate settings
•4 sturdy wire shelves
•LED lights for the best illumination
•Energy Efficient Compressor
Dimensions (H:W:D) –74.5 x 28.5 x 29.7 inches
Showcase Chiller

ACCESSORIES
1. User’s Manual
2. Warranty Certificate

TECHNICAL SPECIFICATIONS
Model Number
SUP-142A
Rated Voltage /
Frequency
220-240V/60Hz
Current
3.6A
Wattage
450W+18W
Energy Consumption
1.61 KWh/24h
Refrigerant/Amount
R134a/165g
Net Weight in kg
86 kg
Gross Weight in kg
97 kg
Compressor
Brand ZEL
Compressor Model
GVY75AG

MODEL AND SERIAL NUMBER LOCATION
Left Side
On the box of the unit.

On the box of the unit.
Back Side
MODEL AND SERIAL NUMBER LOCATION

On the back side of the unit.
MODEL AND SERIAL NUMBER LOCATION

Remove the bracket at the
lower left part of the
chiller door.
INSTALLATION PROCEDURE

Adjust the levelling feet for
stability.
INSTALLATION PROCEDURE

BASIC PARTS
1. Upper hinge
2. Control Panel
3. Glass Door
4. Shelf
5. Lower Hinge
6. Lower Cover
7. Castor
8. Castor Screw
9. Upper Lock Pad
10.Lower Lock Pad
11.Liner
12.Evaporating Fan
13.Lamp Switch
14.Electronic Control Panel

Led switch and control panel
BASIC PARTS

LED lights and Shelves
BASIC PARTS

CONTROL PANEL LEGENDS AND COMMANDS
1. Press “SET” and the temperature cycle between 2°C and 6°C.
2. The user can press “SET” to select different temperature at will.
NOTE: Temperature setting tolerance is ±3°C

CARE AND MAINTENANCE
Do not open the door frequenlty and too long to save energy.
Never eave heavy or hot objects on top panel of the showcase to avoid
deforming.
Cut off the power befor cleaning.
To clean the showcase, please use soft cloth dampened in some mild
detergent. After cleaning, wife the unit dry, never use strong detergent and
hot water.
Use warm water to clean oil or fruit juice stain on the magnetic gasket in
order to keep its elasticity.
The showcase should not be left unused for a long time. If showcase will not
be used for a long time, disconnect the main power first, then clean the
inside and leave the door open for 2-3 days to dry it.

INITIAL ISSUES ENCOUNTERED
Problem
Possible
Cause
Possible Solution
1. Moisture
on
the glass door
-
The environment humidity
is too high.
-
Place the unit where there is
ventilation .
- Do not place it outside the store
or in direct sunlight.
2. Unusual Noise
-
The floor is not stable or
the unit is inclined.
-
The wheels do not touch
the floor well.
- The cabinet is too close to
the wall.
-
There are other objects
directly touching the unit.
-
Mount wood at the bottom.
-
Adjust the wheel screw.
- Keep a certain distance from the
wall.
-
Take the objects away.

WARRANTY INFORMATION
Commercial Stainless Steel Freezer
2 Years Warranty on Parts
1 Year Warranty on Service
5 Years Warranty on Compressor