FujiFilm FinePix6900Zoom User manual

Model Digital camera FinePix6900 ZOOM
CCD Sensor 1/1.7-inch Super CCD (with primary color filter)
The total number of pixels: 3.3 million in an interwoven pattern.
The number of effective pixels: 3.015 million.
Image file Size 2832 x 2128 pixels / 2048 x 1536 pixels / 1280 x 960 pixels / 640 x 480 pixels
File format Still image: DCF-compliant (Exif ver.2.1 TIFF-RGB or JPEG), DPOF-compatible
Movie: AVI format, Motion JPEG
Storage media SmartMedia (3.3V)
Viewfinder 0.55-inch 110,000 pixel electronic viewfinder
Lens Super EBC Fujinon optical 6x zoom lens
Aperture: F2.8 to F11, 13 levels in 1/3 steps
Focus: TTL contrast-type, Auto or Manual
Focus distance f = 7.8mm - 46.8mm
(equivalent to 35mm - 210mm on a 35mm camera)
Exposure control 64 zones TTL metering, Program AE (Auto, SP, P, A), Manual
Sensitivity Equivalent to ISO 100/200/400
White balance Auto, SP: Fully automatic
P, S, A, M: 8 positions selectable. Custom white balance selectable (2 positions)
Focal range Normal: Approx. 50 cm (1.6 ft.) to infinity
Macro: Approx. 10 cm (0.3 ft.) to 80 cm (2.6 ft.)
Shutter Auto, SP: Variable-speed, 3 to 1/2000 sec. (using AE)
P, S, A, M: Variable-speed, 3 to 1/1000 sec. (using AE)
Flash Auto flash using flash control sensor
Effective range: Wide Approx. 0.3 m - 3.6 m (1 ft. - 11.8 ft.)
Tele Approx. 0.9 m - 3.2 m (3 ft. - 10.5 ft.)
Flash modes: Auto, Red-Eye Reduction, Forced Flash, Slow Synchro, Red-Eye
Reduction + Slow Synchro
LCD monitor 2-inch, low-temperature polysilicon TFT 130000 pixels
Video output NTSC (US/Canada model) / PAL (Europe model)
Self-Timer 2 sec. / 10 sec. timer clock
Specifications
System
Input/Output Termimals
A/V Output Stereo mini- jack (1)
Digital (USB) terminal
For file transfer with a personal computer
DC Input Socket for specified AC power adapter
Accessory shoe Hot shoe
Power Supply and Others
Power supply Use one of the following
Rechargeable Battery NP-80 or AC Power Adapter AC-5V/AC-5VH
Number of available shots using battery (when fully charged)
DIGITAL CAMERA
FinePix6900ZOOM
SERVICE GUIDE
U/E/EG-Model
FUJI PHOTO FILM CO., LTD. Ref.No.:ZM00369-100
Printed in Japan 2001.5(NT)
WARNING
THE COMPONENTS INDENTIFIED BY MARK IN THE PARTS LIST SHOULD BE REPLACED
ONLT BY THE COMPONENTS SPECIFIED IN THE PARTS LIST.
RISK OF FIRE AND ELECTRIC SHOCK.
The number of shots shown here is an approximate guide to the number of consecutive shots that can be
taken based on 50% flash usage at normal temperatures. However, the actual number of available shots
will vary depending on the ambient temperature when the camera is used and the amount of charge in
the battery. The number of available shots or available shooting time will be lower in cold conditions.
Conditions for use Temperature: 0oC to +40oC (+32oF to +104oF)
80% humidity or less (no condensation)
Camera dimensions
(W/H/D) 110 mm x 78.5 mm x 93.5 mm / 4.3 in. x 3.1 in. x 3.7 in.
(not including accessories and attachments)
Camera mass Approx. 410g/14.5oz.
(weight) (not including accessories, batteries or SmartMedia)
Weight for photography
Approx. 450g/18.9oz. (including batteries and SmartMedia)
Accessories
SmartMedia MG-16S (1), NP-80 Rechargeable Battery (1), AC Power Adapter AC-5V/
AC-5VH (approx. 2 m (6.6 ft.) connection cord) (1), Shoulder strap (1), Lens cap (1),
Lens cap holder (1), Video Cable (approx. 1.5 m (4.9 ft.), mini-plug (3.5 mm dia.) to
pin-plug cable) (1), Interface Set (1), Owner’s Manual (1)
Optional Accessories
Wide Conversion Lens WL-FX9, Tele Conversion Lens TL-FX9, Adapter ring AR-FX9,
SmartMedia MG-4S, MG-8S, MG-16S, MG-32S/SW, MG-64S/SW, MG-128S/SW, BC-
80 Battery Charger, NP-80 Rechargeable Battery, PC-AD3 PC Card Adapter, Floppy
Disk Adapter (Flash Path) FD-A2, SM-R2 Image Memory Card Reader, DM-R1 Image
Memory Card Reader, SC-FX9 Soft Case
Battety Type No. of Shots Auto Play
NP-80 Using LCD monitor Approx. 100 Approx. 1h
NP-80 Using LCD viewfinder Approx. 120 Approx. 1h
File Size 2832 x 2128 2048 x 1536 1280 x 960 640 x 480 Movie
Quality Mode HI FINE NORMAL BASIC FINE NORMAL FINE NORMAL NORMAL -
Image Data Size Approx.17.7MB Approx.2.4MB Approx.1.2MB Approx.460KB Approx.1.3MB Approx.590KB Approx.620KB Approx.320KB Approx.90KB -
MG-4S (4MB) 0 1 3 8266124423sec.
MG-8S (8MB) 0 3 6 17 6 13 12 25 89 47sec.
MG-16S/SW (16MB) 0 6 13 33 12 26 25 49 164 94sec.
MG-32S/SW (32MB) 1 13 28 68 25 53 50 99 330 191sec.
MG-64S/SW (64MB) 3 26 56 137 50 107 101 198 663 385sec.
MG-128S/SW (128MB) 7 53 113 275 102 215 204 398 1330 774sec.
Number of frames recorded

2
FinePix6900ZOOM(U/E/EG) SREVICE GUIDE
1. Check the area of your repair for unsoldered or
poorly soldered connections. Check the entire
board surface for solder splasher and bridges.
2. Check the interboard wiring to ensure that no
wires are “pinched” or contact high-wattage
resistors.
3. Look for unauthorized replacement parts, particu-
larly transistors, that were installed during a
previous repair. Point them out to the customer
and recommend their replacement.
4. Look for parts which, though functioning, show
obvious signs of deterioration. Point them out to
the customer and recommend their replacement.
5. Caution:
For continued protection against
fire hazard, replace only with same
type 2.5 amperes 125/250 volts
fuse.
Attention:
Afin d’assurer une protection
permanente contre les risques
d’incendie, remplacer uniquement
par un fusible de meme, type 2.5
amperes, 125/250 volts.
6. Warning:
To reduce the electric shock, be
careful to touch the parts.
SAFETY CHECK-OUT
After correcting the original problem, perform the following
safety check before return the product to the costomer.
WARNING!
HIGH VOLTAGE
RISK OF FIRE-
REPLACE FUSE
AS MARKED
2.5A 125/250V
2.5A 125/250V

FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
3
TABLE OF CONTENTS
TABLE OF CONTENTS
Page
1. Names of Components
1-1.Names of External Components .............................................................................................................5
1-2.Names of Internal Components .............................................................................................................. 7
2. Disassembly
2-1.Removing Cabinet R ASSY..................................................................................................................... 8
2-2.Removing LCD / LCD FRAME ................................................................................................................ 9
2-3.Removing SIDEKEY ASSY ..................................................................................................................... 9
2-4.Removing MAIN PWB UNIT ................................................................................................................. 10
2-5.Removing DCST PWB UNIT ................................................................................................................ 10
2-6.Removing EVF UNIT ............................................................................................................................. 11
2-7.Removing Battery cover ....................................................................................................................... 11
2-8.Removing Battery Frame ASSY ........................................................................................................... 12
2-9.Removing ST ASSY .............................................................................................................................. 12
2-10.Removing MAIN Frame ...................................................................................................................... 13
2-11.Removing LENS CONST ................................................................................................................... 13
2-12.Removing LENS CABI ASSY ............................................................................................................. 14
2-13.Removing KEY PWB ASSY / MODE ASSY ........................................................................................ 14
3. Adjustment
3-1.Important Point of Adjustments when Replacing Major Parts ......................................................... 15
3-2.Preparation for Adjustments ................................................................................................................ 15
3-2-1.Measuring Equipments .................................................................................................................. 15
3-2-2.Jigs and Charts............................................................................................................................... 15
3-2-3.Connection ...................................................................................................................................... 16
3-2-4.Subject ............................................................................................................................................. 16
3-2-5.Environmental setting for AF Adjustment .................................................................................... 17
3-2-6.Environmental setting for Flash Adjustment ............................................................................... 17
3-3.About the Adjustment PC Soft ............................................................................................................. 18
3-3-1.Attention at DSC jig driver............................................................................................................. 18
3-3-2.Attention at PC adjustment soft .................................................................................................... 19
3-3-3.Attention at Firmware..................................................................................................................... 20
3-3-4.Contents of Adjustment Software ................................................................................................. 21
3-3-5.Starting the Adjustment Software ................................................................................................. 21
3-3-6.Customizing of Adjustment Software ........................................................................................... 22
3-3-7.Use of each command ................................................................................................................... 24
3-3-8.Reading / Writing EEPROM Data ................................................................................................. 25
3-3-9.Procedure for Saving or Recording EEPROM Data ................................................................... 26
3-4. Adjustment
3-4-1.Procedures of the Camera Jig Mode ........................................................................................... 27
3-4-2.Using the Adjustment Program ..................................................................................................... 27
3-4-3.Mode dial Adjustment .................................................................................................................... 28
3-4-4.Battery Adjustment ......................................................................................................................... 28
3-4-5.CCD defect data input / OFD voltage Adjustment ...................................................................... 29
3-4-6.CAM Adjustment ............................................................................................................................. 30
3-4-7.AF Adjustment ................................................................................................................................30
3-4-8.Flash Adjustment............................................................................................................................ 31
3-4-9.Firmware version check................................................................................................................. 31
3-4-10.End Setting ................................................................................................................................... 32
3-5. Inspection.............................................................................................................................................. 32
3-6.Adjustment Addresses .......................................................................................................................... 33
4. Appendix ............................................................................................................. 92

4
FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
1. Names of ComponentsSpecification
Camera Features
* The newly developed super CCD(featuring a total of 3.3 million pixels) used in the FinePix6900 ZOOM provides ultra-
high rasolution image file with 6.03 million (2832 ×2128) pixels.
* 6x optical zoom that uses aspherical lenses for super optical performance
* Maximum 4.4seamless digital zoom at VGA mode
* 0.55-inch 110,000 pixel Electronic Viewfinder
* The wide range of exposure modes, which includes a manual photography mode, allows you to precisely tailor the
photography settings to the conditions.
* Quick, responsive operation with a 3-second startup and as little as 1-second between shots.
* Fast ISO 400 film speed (compared to a standard film speed of ISO 100) and a built-in automatic flash allow shooting
in a wider range of situations.
* Hot shoe for syncronizing an extornal flash unit
* Auto focus with macro photography function (manual focus also available)
* Automatic shooting modes for different types of shot allow settings that are matched to your subject
* Convenient preview function so you can quickly check your shots
* Continuous shooting function even at maximum resolution
* Histogram display function lets you instantly check exposure levels after you take a shot.
* Trimmed recording function saves only that part of the image you want to keep.
* Playback zoom function (up to 18x)
* Multi-level exposure and black-and-white photography functions allow even more scope for photographic expression
* Information button shows a list of the camera settings at one touch whenever you need it
* Magnesium alloy body
* Easy high-speed image file transfer via the USB connection
Explanation of Terms
AF/AE Lock : On the FinePix 6900 ZOOM, pressing the shutter button down half way locks the focus and
exposure settings (AF and AE lock). If you want to focus on a subject that is not centered in the
frame or change the picture composition after the exposure is set, you can obtain good results by
changing the composition after the AF and AE settings are locked.
Auto Power Save If the camera is not used in any way for 30 seconds, this function switches features such as the
LCD monitor off (Sleep mode) to prevent battery depletion and the waste of power when the AC
power adapter is connected. If the camera is then left unused for a further period, the Auto Power
Save function switches the camera off. This period can be set to 2 minutes or 5 minutes on this
camera. The Auto Power Off function does not operate in PC mode, during automatic playback,
or if it is disabled during setup.
DPOF : Digital Print Order Format. DPOF is a format used for recording information on a storage media
(image memory card, etc.) that allows you to specify which of the frames shot using a digital
camera are printed and how many prints are made of each image.
EV : A number that denotes exposure. The EV is determined by the brightness of the subject and
sensitivity (speed) of the film or CCD. The number is larger for bright subjects and smaller for dark
subjects. As the brightness of the subject changes, a digital camera maintains the amount of light
hitting the CCD at a constant level by adjusting the aperture and shutter speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the
light is halved, the EV decreases by 1.
JPEG : Joint Photographics Experts Group. A file format used for compressing and saving color images.
The compression ratio can be selected, but the higher the compression ratio, the poorer the
quality of the expanded image.
Motion JPEG : A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file.
Images in the file are recorded in JPEG format. Motion JPEG can be played back by QuickTime
3.0 or later.
PC Card : A generic term for cards that meet the PC Card Standard.
PC Card Standard : A standard for PC cards determined by the PCMCIA.
PCMCIA : Personal Computer Memory Card International Association (US).
White Balance : Whatever the kind of the light, the human eye adapts to it so that a white object still looks white.
On the other hand, devices such as digital cameras see a white subject as white by first adjusting
the color balance to suit the color of the ambient light around the subject. This adjustment is
called matching the white balance. A function that automatically matches the white balance is
called an Automatic White Balance function.
Function :

5
1. Names of Components
FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
1. Names of Components
1-1. Names of External Components
Hot shoe
Mode dial Focusing ring
(Macro : close-up photography)
button
(Self-timer) button
Self-timer lamp
Shutter button
(Flash) button
Mode switch
(Power) button
(Continuous shooting) button
Command dial
Indicator lamp
AE-L (AE lock) button
(Focus Check) button
EVF/LCD (viewfinder/monitor
selector) button
SHIFT button
Viewfinder (EVF)
DISP button
BACK button
Tripod mount
LCD monitor
Command dial
Strap mount
SmartMedia slot cover
SmartMedia slot
MENU/OK button
Battery cover
4-direction ( ) button

6
FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
1. Names of Components
Mode switch
Mode dial
Mode switch
(Power) button
Photography mode
Playback mode
Manual
Auto
Movie
Setup
Shutter-priority Auto
Programed Auto
Scene Position
Aperture-priority Auto
(Exposure compensation)
button
(AF/Custom white balance)
button
Lens
Focusing mode selector
switch
Zoom button
Flash control sensor
Flash pop-up button DIGITAL (USB) socket
Video out socket
DC IN 5V (power input) socket
Flash
INFO (information check) button
Terminal cover

7
1. Names of Components
FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
F CABI ASSY
R CABI ASSY
MODE ASSY
KEY PWB ASSY
R CABI
LCD
EVF UNIT
MAIN PWB UNIT
DCST PWB UNIT
LENS CONST
SIDEKEY ASSY
ST ASSY
F CABI
1-2. Names of Internal Components

FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
2. Disassembly
8
2-1. Disassembly
2-1. Removing Cabinet R ASSY
[Procedure]
Remove in the order indicated by circled numbers.
1. Screw x6
2. Cabi R
3. FFC
1
1
1
1
1
3
2

9
FinePix6900ZOOM(U/E/EG) SERVICE GUIDE 2. Disassembly
2-2. Removing LCD / LCD FRAME
[Procedure]
Remove in the order indicated by circled numbers.
1. Open the LCD / LCD FRAME
2. Wire Harness & FFC
1
2
1
2
2-3. Removing SIDEKEY ASSY
[Procedure]
Remove in the order indicated by circled numbers.
1. FFC
2. SIDEKEY ASSY

FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
2. Disassembly
10
2-4. Removing MAIN PWB UNIT
[Procedure]
Remove in the order indicated by circled numbers.
1. FFC x2
2. Screw
3. MAIN PWB UNIT
2-5. Removing DCST PWB UNIT
[Procedure]
1. Discharge the main capacitor.
2. Wire Harness x4
3. Screw
4. DCST PWB UNIT
[Notes on Reassembly]
Take care to the Flash wire harness during reassembly.
1
1
3
2
3
1
2
2
4

11
FinePix6900ZOOM(U/E/EG) SERVICE GUIDE 2. Disassembly
2-6. Removing EVF UNIT
[Procedure]
Remove in the order indicated by circled numbers.
1. EVF UNIT
2-7. Removing Battery cover
[Procedure]
Remove in the order indicated by circled numbers.
1. Battery frame
2. Battery cover
1

FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
2. Disassembly
12
2-8. Removing Battery Frame ASSY
[Procedure]
Remove in the order indicated by circled numbers.
1. Screw
2. Battery Frame ASSY
2-9. Removing ST ASSY
[Procedure]
Remove in the order indicated by circled numbers.
1. Press the pop-up button
2. ST ASSY
2
1
2
1

13
FinePix6900ZOOM(U/E/EG) SERVICE GUIDE 2. Disassembly
2-10. Removing MAIN Frame
[Procedure]
Remove in the order indicated by circled numbers.
1. Screw x4
2. Main Frame
2-11. Removing LENS CONST
[Procedure]
Remove in the order indicated by circled numbers.
1. LENS CONST
2
1
1
1
1

FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
2. Disassembly
14
1
1
2
1
2
1
2
3
4
2-12. Removing LENS CABI ASSY
[Procedure]
Remove in the order indicated by circled numbers.
1. Screw x3
2. LENS CAMI ASSY
* Please do not re-assembly because LENS CABI ASSY controls the torque.
2-13. Removing KEY PWB ASSY / MODE ASSY
[Procedure]
Remove in the order indicated by circled numbers.
1. Wire Harness & FFC
2. Screw x3
3. KEY PWB ASSY
4. MODE ASSY
[Notes on Reassembly]
Take care to the Flash shoe wire harness during re-assembly.

FinePix6900ZOOM(U/E/EG) SERVICE GUIDE 3. Adjustment
15
3.Adjustment
3-1.Important Point of Adjustments when Replacing Major Parts
After the replacement of the MODE DIAL,LENS CONST,MAIN PWB ASSY or DCST CONST
make adjustments that are marked 'O' in Table 1.
LENS HOLDER
LENS STAND
LENS BASE PLATE
3-2.Preparation for adjustments
3-2-1.Measuring Equipments
Monitor TV Regurated power supply PC(PC-AT/OS:Win98)
Pattern box (Compatible with PTB450) Digital voltmeter Ligth (For AF adjustment)
3-2-2.Jigs and Charts
Product / Model Parts No. Usage Remarks
SIEMENS STAR CHART J-6080-875-A AF Adjustment Common with 8mm VTR (*1)
FILTER LB140 ZJ00006-100 CAM Adjustment Common with DX--9 / DX-7 / DS-7
LENS HOLDER ZJ00008-100 AF Adjustment Common with 8mm VTR (*2)
LENS STAND ZJ00009-100 AF Adjustment Common with 8mm VTR (*2)
LENS BASE PLATE ZJ00010-100 AF Adjustment Common with 8mm VTR (*2)
POWER CABLE JIG ZJ00214-100 General adjustment Common with DX-5
GRAY CHART ZJ00254-100 FLASH Adjustment Common with MX-700
f=600mm CONVERSION LENS ZJ00252-100 AF Adjustment Common with 8mm VTR (*2)
FinePix6900zoom Adjustment PC soft ZJ00498-100 General Adjustment Custom software (Only operate at Win98)
AC ADAPTOR (AC-5VH) ----------------- General Adjustment Accessories
USB CABLE ----------------- General Adjustment Accessories
DRIVER SOFTWARE ----------------- PC communication Accessories (CD-ROM)
Table 2
(*1) Please do the expansion copy to the A3 size and use the Siemens Star Chart.
(*2) This is a holder set for holding the conversion lens. For details, see the figure below.
Mode Dial Adj. Battery Adj. CCD data write Cam Adj. AF Adj. Flash Adj. End setting
MODE DIAL O O
LENS CONST O O O*1 O*1 O
MAIN O O *2 O O*1 O*1 O
DCST O O O O
Table 1
*1:Please do the AF adjustment and the Flash adjustment after completing the CAM adjustment.
*2:When MAIN PWB ASSY is exchanged, the CCD's defective data will be lost. Therefore, you have to remove
EEPROM IC(IC311) from defective MAIN PWB ASSY. And then, you have to exchange EEPROM IC(IC311) of
new MAIN PWB ASSY to an EEPROM IC you removed before you replace MAIN PWB ASSY.

3. Adjustment FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
16
3-2-3.Connection
3-2-4.Subject
Set up the camera and the pattern box inthe positions
shown in the figure below.
Where the adjustment setting for the subject is "Not
required",the adjustment will have no effect regardless of
what is photographed.
For adjustments where an all-white pattern or coior bar
chart is specified as the lens assembly and the
subject,adjust the distance between the camera and the
subject as shown beiow.
All-White Pattern
Remove the chart from the pattern box and adjust the
distance between the camera and the pattern box so that
the entire screen in white. <Fig.2-2>
1. Brightness:160+-5cd/m2
Pattern box center with no chart and filter LB140
Minolta LS-110 Luminance Meter
2. Color temperature:6100+-50oK
Pattern box center with no chart and filter LB140
Minolta COLOR METER III F
<Fig.2-2> Subject
<Fig.2-1> Connection
FinePix6900zoom
USB CABLE
DC IN
Li BATTERY JIG
VIDEO OUT
BATTERY JIG
Regurated power supply
DC 5V DC 5V
Monitor TV
PC
PATTERN
BOX
80+-5mm
FinePix6900zoom
LB140 FILTER
Regurated power supply

FinePix6900ZOOM(U/E/EG) SERVICE GUIDE 3. Adjustment
17
3-2-5.Environmental setting for AF adjustment
1. It sets it by using the f=600mm conversion lens and siemens star chart as shown in <Fig.2-3>.
2. It illuminate on the siemens star chart by using the 2 light source. When the illuminance is insufficient, it
is not possible to adjust it by "Brightness shortage". It is necessary to adjust the source of light and the
distance of siemens star chart to about 5cm.
*The siemens star chart reflection brightness: 7.0-9.0Ev
3. Please set the lens position of the camera on the concentric circle about conversion lens.
4. It becomes "Pnmod error" while AF adjusting if the center of conversion lens and the center of the cam-
era lens come off largely and it is set and it cannot AF adjustment.
3-2-6.Environmental setting for Flash adjustment
1. When adjusting the flash, it is easy to be influenced by external light, so be sure to perform the adjust-
ment in an environment that satisfies the following conditions.<Fig.2-4>
2. In order to eliminate the influence of external light, make the area around the gray chart as dark as
possible.
3. The distance between the gray chart used during the flash adjustment and the camera should be 110cm.
<Fig.2-4> Focus
<Fig.2-3> AF
INF Adjustment: :640mm+-5mm
(with f=600mm conversion lens)
900mm Adjustment :940mm+-5mm
500mm Adjustment :540mm+-5mm
100mm Adjustment :140mm+-5mm
FinePix6900zoom 40mm+-5mm
PC
Siemens
star chart
Light(Fluorescent lamp stand)
Monitor TV
110cm
FinePix6900zoom
Gray chart

3. Adjustment FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
18
click
click
check a install folder
click click
<Fig.3-1> 1st step (start the installation) <Fig.3-2> 2nd step (install folder)
<Fig.3-3> 3rd step (install) <Fig.3-4> 4th step (Finish)
3-3.About the Adjustment PC Soft
3-3-1.Attention at DSC jig driver
FinePix6900Zoom uses the USB cable to communicate with the personal computer.
When FinePix6900Zoom is adjusted, the installation of the DSC jig driver is necessary.
The download, decompression and installation procedure is recorded as follows.
[Download and decompression]
1) Download the compressed DSC jig driver from Web server (http://fujifilm-di.intranets.com/).
2) Defrost the downloaded compression file.
(Note)
The DSC jig driver in this server is compression file of ZIP form.
Therefore, after downloading this compression file from the Web server, the decompression of the file is necessary.
In the decompression software, if the decompression of the ZIP form can be done, any software is OK.
Please prepare each one for the decompression software.
[Installation]
1) The unzipped DSC jig driver (ZJ00476-100) folder is opened.
2) Please double-click the "Setup.exe", start the installation of "FUJI FILM DSC jig driver".
3) "FUJI FILM DSC jig driver" is installed according to the instruction of the screen <Fig.3-1, 3-2, 3-3, 3-4>.
Note: If the FUJI FILM digital camera (example FinePix4900zoom) has already been repaired, the installation of
the DSC jig driver is not necessary.

FinePix6900ZOOM(U/E/EG) SERVICE GUIDE 3. Adjustment
19
3-3-2.Attention at PC adjustment soft
This adjustment software can perform adjustments to each block using the user program ( Fx6900z.ff) in the base
program (FFW.exe). A basic program is FinePix6900zoom exclusive use.
The download, decompression and installation procedure is recorded as follows.
[Download and decompression]
1) Download the compressed PC adjustment software from Web server (http://fujifilm-di.intranets.com/).
2) Defrost the downloaded compression file.
(Note)
The PC adjustment software in this server is compression file of ZIP form.
Therefore, after downloading this compression file from the Web server, the decompression of the file is necessary.
In the decompression software, if the decompression of the ZIP form can be done, any software is OK.
Please prepare each one for the decompression software.
The decompression and the preservation method of the PC adjustment software are described as an example of
FinePix2300.
As the PC adjustment software is different in each model, the compression file name is also different.
Specify the preservation drive for C drive if it is decompression software which can specify the preservation drive.
Similarly, defrost without making a new folder if it is decompression software that can be defrosted without making
a new folder.
Defrost simply if the decompression software which you cannot specify the drive specification and the folder mak-
ing.
[Install]
1) When the decompression is only done, the folder named ZJ00481-100 is automatically made. <Fig.3-5>
2) Copy the folder named FinePix2300UE in this folder in C drive, installation is finished. <Fig.3-6>
The folder of ZJ00481-100 becomes unnecessary at the end , and delete this folder.
(Caution)[Important]
*: PC adjustment software can not start when there is folder of FinePix2300UE in folder
named ZJ00481-100 (Fig.3-5).
*: Please preserve the folder of FinePix2300UE right under C drive (Fig.3-6).
*: Please do not change the folder named FinePix2300UE.
*: PC adjustment software can not start when folder name is changed.
ZJ00481_100
FinePix2300U E
ZJ00481_100
FinePix2300U E
<Fig.3-5> 1st step (Decompression) <Fig.3-6> 2nd step (Finish)
31/2Floppy [A:]
[C:]
My Computer
31/2Floppy [A:]
[C:]
My Computer

3. Adjustment FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
20
3-3-3.Attention at Firmware
The firmware is not needing downloaded as long as there is usually no instruction.
[Download and decompression]
1) Download the compressed firmware from Web server (http://fujifilm-di.intranets.com/).
2) Defrost the downloaded compression software.
3) The folder named ZJ00482-100*1 can be made by simply defrosting <Fig.3-7>.
4) The imfidx10 folder is included in the folder (ZJ00482-100).
5) The imfidx10 folder is copied onto Smart Media (more than 4MB, 3.3V).
(Note)
*1: The decompression and the preservation method of the firmware are described as an example of FinePix2300.
Firmware in this server is compression file of ZIP form.
Therefore, after downloading this compression file from the Web server, the decompression of the file is necessary.
In the decompression software, if the decompression of the ZIP form can be done, any software is OK.
Please prepare each one for the decompression software
As the Firmware is different in each model, the compression file name is also different.
ZJ00482_100
imfidx10
<Fig.3-7>
(Caution)[Important]
*: Download should use Smart Media.
*: Please format Smart Media with the camera.
*: When the folder named imfidx10 is changed, the firmware cannot be downloaded.
5)
31/2Floppy [A:]
[C:]
My Computer