Fujioh FH-IC7020 User manual

Catalogue
Safety Warnings .......................................................................2
Product Overview ..................................................................... 9
Product Information of Ceramic Hob ........................................ 11
Product Information of Induction Hob .......................................11
Using your Induction and Ceramic Hob ...................................... 13
Using the Dual zone function of Ceramic Hob ............................. 16
Using the Boost function of Induction Hob ................................. 16
Using the Pause function- STOP and GO ................................... 17
Locking the Controls ............................................................... 17
Over-Temperature Protection ....................................................19
Residual Heat Warning ............................................................ 19
Detection of Small Articles for Induction Hob ..............................19
Auto Shutdown ...................................................................... 19
Using the Timer ......................................................................19
Using the Keep warm of Induction Hob for model FH-IC7030 ........22
Heat Settings .........................................................................23
Care and Cleaning .................................................................. 24
Hints and Tips ........................................................................25
Failure Display and Inspection for Induction Hob cooking zone for
model FH-IC7020 and FH-IC7030 ............................................. 26
Failure Display and Inspection for Ceramic Hob cooking zone for model
FH-IC7020 .............................................................................27
Technical Specification ........................................................... 28
Installation ............................................................................ 28

2
Safety Warnings
Your safety is important to us. Please read this
information before using your cooktop.
Installation
Electrical Shock Hazard
• Disconnect the appliance from the mains
electricity supply before carrying out any work
or maintenance on it.
•Connection to a good earth wiring system is
essential and mandatory.
• Alterations to the domestic wiring system must
only be made by a qualified electrician.
• Failure to follow this advice may result in
electrical shock or death.
Cut Hazard
• Take care - panel edges are sharp.
• Failure to use caution could result in injury or
cuts.
Important safety instructions
• Read these instructions carefully before
installing or using this appliance.
• No combustible material or products should be
placed on this appliance at any time.
• Please make this information available to the
person responsible for installing the appliance
as it could reduce your installation costs.
• In order to avoid a hazard, this appliance must
be installed according to these instructions for

3
installation.
• This appliance is to be properly installed and
earthed only by a suitably qualified person.
• This appliance should be connected to a circuit
which incorporates an isolating switch
providing full disconnection from the power
supply.
• Failure to install the appliance correctly could
invalidate any warranty or liability claims.
Operation and maintenance
Electrical Shock Hazard
• Do not cook on a broken or cracked cooktop. If
the cooktop surface should breaks or cracks,
switch the appliance off immediately at the
mains power supply (wall switch) and contact
a qualified technician.
• Switch the cooktop off at the wall switch before
cleaning or maintenance.
• Failure to follow above advice may result in
electrical shock or death.
Health Hazard
• This appliance complies with electromagnetic
safety standards. However, persons with
cardiac pacemakers or other electrical
implants (such as insulin pumps) must consult
with their doctor or implant manufacturer
before using this appliance to make sure that
their implants will not be affected by the

4
electromagnetic field. Failure to follow this
advice may result in death.
Hot Surface Hazard
• During use, accessible parts of this appliance
will become hot enough to cause burns.
• Do not let your body, clothing or any item
other than suitable cookware contact the
Induction until the surface is cool.
• Metallic objects such as knives, forks, spoons
and lids should not be placed on the hob
surface since they can get hot.
• Keep children away.
• Handles of saucepans may be hot to touch.
Avoid overhanging of saucepan handles over
other cooking zones that are on. Keep handles
out of reach of children.
• Failure to follow above advice could result in
burns and scalds.
Cut Hazard
• The razor-sharp blade of a cooktop scraper is
exposed when the safety cover is retracted.
Use with extreme care and always store safely
and out of reach of children.
• Failure to use caution could result in injury or
cuts.
Important safety instructions
• Never leave the appliance unattended when in
use. Boil-over causes smoking and greasy
spillovers that may ignite.
• Never use your appliance as a work or storage
surface.

5
• Never leave any objects or utensils on the
appliance.
• Do not place or leave any magnetisable
objects (e.g. credit cards, memory cards) or
electronic devices (e.g. computers, MP3
players) near the appliance, as they may be
affected by its electromagnetic field.
• Never use your appliance for warming or
heating the room.
• After use, always turn off the cooking zones
and the cooktop as described in this manual.
Do not rely on the pan detection feature to
turn off the cooking zones when you remove
the pans.
• Do not allow children to play with the appliance
or sit, stand, or climb on it.
• Do not store items of interest to children in
cabinets above the appliance. Children
climbing on the cooktop could be seriously
injured.
• Do not leave children alone or unattended in
the area where the appliance is in use.
• Children or persons with a disability which
limits their ability to use the appliance should
have a responsible and competent person to
instruct them in its use. The instructor should
be satisfied that they can use the appliance
without danger to themselves or their
surroundings.

6
• Do not repair or replace any part of the
appliance unless specifically recommended in
the manual. All other servicing should be done
by a qualified technician.
• Do not use a steam cleaner to clean your
cooktop.
• Do not place or drop heavy objects on your
cooktop.
• Do not stand on your cooktop.
• Do not use pans with jagged edges or drag
pans across the Induction glass surface as this
can scratch the glass.
• Do not use scourers or any other harsh
abrasive cleaning agents to clean your cooktop,
as these can scratch the Induction glass.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
• This appliance is intended to be used in
household and similar applications such as:
staff kitchen areas in shops, offices and other
working environments, farm houses, by clients
in hotels, motels and other residential type
environments, bed and breakfast type
environments.
• WARNING: The appliance and its accessible
parts become hot during use.
• Care should be taken to avoid contact with
heating elements.
• Children less than 8 years of age shall be kept
away unless continuously supervised.

7
• This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given supervision
or instruction concerning use of the appliance
in a safe way and understand the hazards
involved.
• Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
• WARNING: Unattended cooking on a hob with
fat or oil can be dangerous and may result in
fire. NEVER try to extinguish a fire with water,
but switch off the appliance and then cover
flame with a lid or a fire blanket.
• WARNING: Danger of fire: do not store items
on the cooking surfaces.
• WARNING: If the surface is cracked, switch off
the appliance to avoid the possibility of electric
shock.
• A steam cleaner should not to be used.
• The appliance is not intended to be operated
by an external timer or separate
remote-control system.
CAUTION: The cooking process has to be
supervised. A short term cooking process has
to be supervised continuously.
• WARNING: In order to prevent tipping of the

8
appliance, this stabilizing means must be
installed. Refer to the instructions for
installation.
WARNING: Use only hob guards designed by
the manufacturer of the cooking appliance or
indicated by the manufacture of the appliance
in the instruction manual or hob guards
incorporated in the appliance. The use of
inappropriate guards can cause accidents.
WARNING:
The ceramic plate is hot after cooking, please
don’t touch with your hand.
The body and bottom case of cooktop are hot
when cooking or after cooking, please don’t
touch with your hand.
Failure to follow about advice could result in
burns and scalds.
Congratulations on the purchase of your new Hybrid hob.
We recommend that you spend some time to read this Instruction / Installation
Manual in order to fully understand on how to install correctly and operate it.
For installation, please read the installation section.
Read all the safety instructions carefully before use and keep this Instruction /
Installation Manual for future reference.

9
1. Induction hob 2000W zone ,boost to 2300W
2. Ceramic hob max 2200/1000W Double ring zone
3. Glass plate
4. Control Panel
1. Induction hob 2000W zone, boost to 2300W
2. Induction hob 1500W zone, boost to 2000W
3. Ceramic hob max 1000/2000W Double ring zone
4. Glass plate
5. Control Panel
Product Overview
Top View
For model: FH-IC7020
For model: FH-IC7030

10
1. Heating zone selection controls
2. Timer control
3. Power / Timer regulating key / Child Lock control
4. Boost function control
5. Dual zone control
6. ON/OFF control
7. Stop and go function control
1. Heating zone selection controls
2. Timer control
3. Power / Timer regulating key
4. Child Lock control
5. ON/OFF control
6. Boost function control
7. Keep warm function control
8. Dual zone control
9. Stop and go function control
7.Stop and go function control
Control Panel
For model: FH-IC7020
For model: FH-IC7030

11
iron pot
Product Information of Ceramic Hob
•The microcomputer ceramic cooker hob can meet different kinds of cuisine
demands because of resistance wire heating, micro-computerized control and
multi-power selection. The ceramic cooker hob centers on customers and adopts
personalized design. The hob has safe and reliable performances, making your life
comfortable and enabling to fully enjoy the pleasure from life.
•Ceramic hob cooking is based on ceramic heating technology; the nickel chrome
wires of the hob would radiate heat and give out the ceramic to warm up the food.
•Ceramic hob do not pick pot. You can use any kind of pot or pan, such as copper
pots, wok, stainless steel, cookware, glass pot, casserole and ceramic pot.
Production Information of Induction Hob
Induction cooking is a safe, advanced, efficient, and economical cooking
technology. It works by electromagnetic vibrations generating heat directly in the
pan, rather than indirectly through heating the glass surface. The glass becomes
hot only because the pan eventually warms it up.
magnetic circuit
ceramic glass pate
induction coil
induced currents

12
Before using your New Induction and Ceramic Hob
• Read this guide, taking special note of the ‘Safety Warnings’ section.
• Remove any protective film that may still be on your Induction and Ceramic hob.
Using the Touch Controls
• The controls respond to touch, so you don’t need to apply any pressure.
• Use the ball of your finger, not its tip.
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean, dry, and that there is no object (e.g. a
utensil or a cloth) covering them. Even a thin film of water may make the controls
difficult to operate.
Choosing the right Cookware for induction
cooking side
• Only use cookware with a base suitable for induction
cooking. Look for the induction symbol on the
packaging or on the bottom of the pan.
• You can check whether your cookware is suitable by carrying out
a magnet test. Move a magnet towards the base of the pan. If it
is attracted, the pan is suitable for induction.
• If you do not have a magnet:
1. Put some water in the pan you want to check.
2. If does not flash in the display and the water is heating, the pan is suitable.
• Cookware made from the following materials is not suitable: pure stainless steel, aluminum or
copper without a magnetic base, glass, wood, porcelain, ceramic, and earthenware.
Remarks: Don’t pick the pot for the ceramic
hob cooking side
Do not use cookware with jagged edges or a curved base.

13
Make sure that the base of your pan is smooth, sits flat against the glass, and is
the same size as the cooking zone. Always center your pan on the cooking zone.
Always lift pans off the ceramic cooker – do not slide, or they may scratch the
glass.
Pan dimensions for induction hob
The cooking zones are up to a limit, and automatically adapts to the pan diameter
However minimum diameter of the bottom of pan is fixed according to the
corresponding cooking zone. To obtain the best efficiency of your hob, please
place the pan in the center of the cooking zone.
The base diameter of induction cookware
For model: FH-IC7020
Cooking zone (mm)
Minimum (mm)
1
120
For model: FH-IC7030
Cooking zone (mm)
Minimum (mm)
1,2
120
Using your Induction and Ceramic Hob
To start cooking
1.Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays
show “– “ or “ – – “, indicating that the hob has
entered the state of standby mode.

14
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Touch the heating zone selection control, then
an indicator next to the key will flash.
4. Set a power level by touching the “ ”, “ ”, or slide along the “ ”control,
or just touch any point of the “ ”.
Or
Or
a. If you don’t select a heat zone within 1 minute, the hob will automatically
switch off. You will need to start again at step 1.
b. You can modify the heat setting at any time during cooking.
c. If slide along the “ ”, power will vary from stage 2 to stage 8.
Press “ ”, power will decrease by one stage each time till stage 0.
Press “ ”, power will increase by one stage each time till stage 9.
If the display flashes alternately with the heat
setting for induction hob
This means that:
• You have not placed a pan on the correct cooking zone or,
• The pan you’re using is not suitable for induction cooking or,
• The pan is too small or not properly centered on the cooking zone.

15
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed
on it.
When you have finished cooking
1. Touch the heating zone selection control that you wish to switch
off.
2. Turn the cooking zone off by touching the “ ”and scrolling down to “0”.
Or slide along the “ ” to the left point, and then touch the “ ”.
Or touch the left point of “ ”, and then touching the “ ”.
Or
and then
Or
and then
Make sure the power display shows “0”, then shows “H”.
and then
3.Turn the whole cooktop off by touching the ON/OFF control.
4. Beware of hot surfaces
‘H’ will show which cooking zone is hot to touch. It will disappear when the

16
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate
that is still hot.
Using the Dual zone function of Ceramic hob
1. Make sure ceramic hob is working, touch the right heating zone selection
control, then touch button, dual zone will begin to work. The LED indicator
will light up.
2. When dual zone is working, turning off dual zone by touching the right heating
zone selection control, and then touch button.
Using the Boost function of Induction Hob
Boost is the function that one zone rising to a larger power in one second and
lasting for 5 minutes. Thus you can get a more powerful and faster cooking.
Using the Boost to get larger power
1. Touch the heating zone selection button that you wish to Boost,
then an indicator next to the key will flash.
2. Touch the Boost button, the heating zone will begin to work at Boost mode.
The power display will show “P” to indicate that the zone is boosting.
3. The Boost power will last for 5 minutes and then the zone will go back to the
power stage which was set before Boost.

17
4. If you want to cancel the Boost during this 5minutes, touch the heating zone
selection button, an indicator next to the key will flash. And then touch the Boost
button. The heating zone will go back to the power stage which was set before
Boost.
Using the Pause function- STOP and GO
Pause function can be used at any time during cooking. It allows to pause the
induction cooktop and return back to the same heating.
1. Make sure the cooking zone is working.
2. Touch the button STOP and GO, the cooking zone indicator will show “ll”.
And then the operation of the induction cooktop will be deactivated within the
scope of all cooking zones, except the STOP and GO, on/off and lock keys.
3. To cancel the pause status, touch the button STOP and GO, then the cooking
zone will go back to the power stage which you set before.
Locking the Controls
• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).

18
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
For model: FH-IC7020
To lock the controls
Touch the “ ”and “ ” two button at the same time. The timer indicator will
show ‘Lo’.
To unlock the controls
1.Make sure the Induction hob is turned on.
2.Touch the “ ”and “ ” two button at the same time .
3.You can now start using your hob.
When the hob is in the lock mode, all the controls are disable except the ON/OFF,
you can always turn the hob off with the ON/OFF control in an emergency, but you
shall unlock the hob first in the next operation.
For model: FH-IC7030
To lock the controls
Touch the keylock control for 3 second. The timer indicator will show “Lo”.
To unlock the controls
1. Make sure the hob is turned on.
2. Touch and hold the keylock control for 3 second.
3. You can now start using your hob.
When the hob is in the lock mode, all the controls are disable except the ON/OFF,
you can always turn the hob off with the ON/OFF control in an emergency, but you
shall unlock the hob first in the next operation.

19
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the induction
and hob. When an excessive temperature is monitored, the induction and hob will
stop operation automatically.
Residual Heat Warning
When the hob has been operating for some time, there will be some residual heat.
The letter “H” appears to warn you to keep away from it.
Detection of Small Articles for induction hob
When an unsuitable size or non-magnetic pan (e.g. aluminum), or some other
small item (e.g. knife, fork, key) has been left on the hob, the hob automatically
go on to standby in 1 minute. The fan will keep cooling down the induction hob for
a further 1 minute.
Auto Shutdown
Another safety feature of the hob is auto shutdown. This occurs whenever you
forget to switch off a cooking zone. The default shutdown times are shown in
the table below:
Power level
1
2
3
4
5
6
7
8
9
ll
A
Default working timer
(hour)
8
8
8
4
4
4
2
2
2
2
2
People with a heart pace maker should consult with their doctor before
using this unit.
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.