Fujitsu Siemens Computers D1555 User manual

COMPONENTS
Technisches Handbuch / Technical Manual
Mainboard D1555

Sie haben ...
... technische Fragen oder Probleme?
Wenden Sie sich bitte an:
•Ihren zuständigen Vertriebspartner
•Ihre Verkaufsstelle
Weitere Informationen finden Sie im Handbuch "Sicherheit" und "Ergonomie".
Aktuelle Informationen und Updates (z. B. BIOS-Update) zu unseren Mainboards finden Sie im
Internet: http://www.fujitsu-siemens.com/mainboards
Are there ...
... any technical problems or other questions you need clarified?
Please contact:
•your sales partner
•your sales outlet
You will find further information in the manuals "Safety" and "Ergonomics".
The latest information and updates (e. g. BIOS update) on our mainboards can be found on the
Internet under: http://www.fujitsu-siemens.com/mainboards

Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.: A26361-D1555-Z120-1-6319
Printed in the Federal Republic of Germany
AG 1002 10/02
A26361-D1555-Z120-1-6319
Mainboard D1555 TECHNISCHES HANDBUCH
TECHNICAL MANUAL

Mainboard D1555
Technisches Handbuch
Technical Manual
Deutsch
English
Français
Ausgabe Oktober 2002
October 2002 edition

Intel, Pentium und Celeron sind eingetragene Warenzeichen der Intel Corporation, USA.
Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft
Corporation.
PS/2 und OS/2 Warp sind eingetragene Warenzeichen von International Business Machines,
Inc.
Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen
der jeweiligen Inhaber und werden als geschützt anerkannt.
Copyright ãFujitsu Siemens Computers GmbH 2002
Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des
Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren.
Zuwiderhandlungen verpflichten zu Schadenersatz.
Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung.
Liefermöglichkeiten und technische Änderungen vorbehalten.
Dieses Handbuch wurde erstellt von
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.
This manual was produced by
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de

A26361-D1555-Z120-1-6319 Umschlag/Cover
Übersicht/Overview Mainboard D1555
Interne Anschlüsse und Steckplätze / Internal
connectors and slots
DIMM 3
PCI 1
PCI 2
AGP
DIMM 2
PCI 4
PCI 5
PCI 3
13
1
2
3
5
7
6
11
9
14
10
12
CNR
16
DIMM 1
CPU
Pentium4
15
4
8
1 = Stromversorgung / Power supply
2 = Bedienfeld / Front panel
3 = USB C/D
4 = USB E/F
5 = Diskettenlaufwerk / Floppy disk drive
6 = IDE-Laufwerke 3/4 / IDE-drives 3/4
7 = IDE-Laufwerke 1/2 / IDE-drives 1/2
8 = Batterie / Battery
9 = Schalter / Switch
10 = Lüfter 2 / Fan 2
11 = CD-Audio in
12 = Audio-Bedienfeld / Audio front
panel
13 = Summer / Buzzer
14 = S/PDIF-Anschluss / S/PDIF
connector
15 = Prozessor-Stromversorgung /
Processor power supply
16 = Lüfter 1 / Fan 1
Optionale Komponenten / Optional
components
Externe Anschlüsse / External connectors
LAN AUDIO
Bedienfeld / Front panel
1) Cable is not included in the delivery scope.
2) The same interface
3) 2pin or 3pin connector possible
1
2
HD-LED1)
Power On/Off
Reset1)
Power On
LED1) 3)

A26361-D1555-Z120-1-6319
Contents
Mainboard D1555.............................................................................................................................1
Notational conventions ..............................................................................................................1
Important notes..................................................................................................................................2
Information about boards...........................................................................................................2
List of features...................................................................................................................................3
Special features.........................................................................................................................4
Brief instructions on installing mainboard...........................................................................................5
Prior to installation.....................................................................................................................5
Interfaces and connectors ..............................................................................................................7
External ports....................................................................................................................................7
Internal ports and connectors ............................................................................................................7
Hard disk connection.................................................................................................................7
Pin assignment of internal ports.........................................................................................................8
Settings with switches and jumpers ............................................................................................12
Add-on modules / Upgrading........................................................................................................13
Replacing processor........................................................................................................................13
Removing and installing processors ........................................................................................13
Upgrading main memory..................................................................................................................15
Upgrading AGP screen controllers...................................................................................................16
Adding PCI cards.............................................................................................................................16
PCI bus interrupts - Selecting correct PCI slot.........................................................................16
Replacing the lithium battery....................................................................................................18
BIOS update....................................................................................................................................19
BIOS Recovery - Recovering System BIOS ...................................................................................20
Microcode Update ...........................................................................................................................20
Drivers.............................................................................................................................................21
Annex .............................................................................................................................................22
Electrical Properties.........................................................................................................................22
APM and ACPI system status, energy-saving modes......................................................................23
Mainboard Revision and BIOS Version............................................................................................24
Error messages .............................................................................................................................25
Glossary..........................................................................................................................................29

A26361-D1555-Z120-1-6319 English - 1
Mainboard D1555
Your mainboard is available in different configuration levels. Depending on the configuration chosen,
some of the hardware components described may not be available on your mainboard.
Further information
Information on the BIOS Setup and additional descriptions of the drivers are contained:
•in the readme files on your hard disk
•on the driver floppy disks included
•on the CD "Drivers & Utilities Collection" or "Drivers & Utilities" or "ServerStart".
i
The programme Acrobat Reader must be installed to be able to open the manuals. You
may find the programme on the CD-ROM directory: utls/acrobat.
For more details please read the according readme.txt files.
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!indicates information which is important for your health or for preventing physical
damage.
i
indicates additional information which is required to use the system properly.
ÊText which follows this symbol describes activities that must be performed in the order shown.
ËThis symbol indicates that you must enter a blank space (press the Space Bar) at this point.
ÚThis symbol indicates that you must press the Enter key.
Text in this typeface indicates screen outputs.
Text in this bold typeface indicates the entries you make via the keyboard.
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters or terms.

Important notes
2 - English A26361-D1555-Z120-1-6319
Important notes
With the mainboard installed you must open the system to access the mainboard. How to dismantle
and reassemble the system is described in the operating manual accompanying the system.
Connecting cables for peripherals must be adequately shielded to avoid interference.
!Observe the safety notes in the operating manual of your system.
Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore
essential to observe the instructions in the "Add-on modules / Upgrading" - "Replacing
the lithium battery" section.
Components can become very hot during operation. Ensure you do not touch
components when making extensions to the mainboard. There is a danger of burns!
The shipped version of this board complies with the requirements of the EEC directive
89/336/EEC "Electromagnetic compatibility".
Compliance was tested in a typical PC configuration.
When installing the board, refer to the specific installation information in the manual for
the receiving device.
i
The warranty is invalidated if the system is damaged during the installation or
replacement of expansions. Information on which expansions you can use is available
from your sales outlet or the customer service centre.
Information about boards
To prevent damage to the mainboard, the components and conductors on it, please take great care
when you insert or remove boards. Take great care to ensure that extension boards are slotted in
straight, without damaging components or conductors on the mainboard, or any other components,
for example EMI spring contacts.
Remove the plug from the mains outlet so that system and mainboard are totally disconnected from
the mains voltage.
Be careful with the locking mechanisms (catches, centring pins etc.) when you replace the
mainboard or components on it, for example memory modules or processors.
Never use sharp objects (screwdrivers) for leverage.
Boards with electrostatic sensitive devices (ESD) are identifiable by the label shown.
When you handle boards fitted with ESDs, you must, under all circumstances,
observe the following:
•You must always discharge static build up (e.g. by touching a grounded object)
before working.
•The equipment and tools you use must be free of static charges.
•Remove the power plug from the mains supply before inserting or removing
boards containing ESDs.
•Always hold boards with ESDs by their edges.
•Never touch pins or conductors on boards fitted with ESDs.

A26361-D1555-Z120-1-6319 English - 3
List of features
Onboard features D1555-A
Chipset SiS 648 / 963
Board size ATX
VGA -
Audio ü
Buzzer / int. Speaker Support ü/ -
LAN / with Alert-on-LAN ü/ -
IDE RAID -
FireWireTM / 1394 / i.LINK®-
HI-SPEED USB 2.0 ü
SmartCard Reader Support (USB / serial) - / -
Temperature monitoring -
System Monitoring -
Fujitsu Siemens Computers Keyboard Power Button Support -
Internal ports
DIMM slots (DDR 333 SDRAM / DDR 266 SDRAM) 2 / 3
AGP Slot (4/8x, 32 bit, 66 MHz, 1.5 V) 1
PCI slot (32-bit, 33 MHz, 5 V and 3.3 V) 5
CNR Slot (Type A, AC‘97 only) 1
IDE RAID interface (RAID 1,2 / IDE 3,4) -
IDE Interface (Ultra DMA/133) 2
Floppy Interface (up to 2.88 Mbyte) 1
S/PDIF* (digital audio) 1
CD / AUX audio input 1 / -
Frontpanel Audio (headphone, microphone) 1
Wake On LAN -
IEEE 1394 connector* (FireWireTM / i.LINK®)-
USB Ports* (2.0, ~480 MB/s) 4
Serial Ports* (FIFO, 16550 compatible) -
Fan Connectors PSU** / CPU / AUX1 / AUX2 -/ 1 / 1 / -
SMBus Connector* (Case Temperature)-
Intrusion Connector* (Case Open) -
Power Connectors ATX / ATX12V / AGP PRO 1 / 1 / -

List of features
4 - English A26361-D1555-Z120-1-6319
External ports
VGA -
Audio Mic. in / Line in / Line out (32 Ω headphones capable) 1 / 1 / 1
Game/MIDI -
LAN (RJ-45) 1
PS/2 mouse/keyboard 1 / 1
USB Ports (2.0, ~480 MB/s) 2
Serial Ports (FIFO, 16550 compatible) 1
Parallel Port (EPP/ECP) 1
* for use with internal devices or optional Front or Rear panel
** not supported by standard power supplies
Special features
Your mainboard is available in different configuration levels. Depending on the configuration, your
mainboards is equipped with or supports the features described in the following.
DeskView / DeskViewOEM
The network-capable manageability software DeskView/DeskViewOEM* mainly
consists of three modules:
•DeskInfo shows the most important device data of the PCs in a network (local
and/or on an administrator PC).
•DeskAlert monitors the operability of all major components and triggers alarms if
necessary depending on the mainboard variant.
•DeskFlash carries out a BIOS update under Windows.
Recovery BIOS
If an error occurs during a BIOS update (e.g. due to a power failure), the system BIOS
will be destroyed. All Fujitsu Siemens Computers mainboards are equipped with a
recovery BIOS. With it a destroyed BIOS can easily be restored. Exact instructions
are provided in the chapter "BIOS Recovery - Recovering System BIOS".
IA-PC
Instantly Available PC ensures fast availability of the PC from an energy-saving mode.
Within just a few seconds the PC is in exactly the same state it was in when it was
switched off without time-consuming booting. Depending on the operating system, the
PC can be switched into an energy-saving mode with applications open by pressing
the ON/OFF switch.

A26361-D1555-Z120-1-6319 English - 5
Brief instructions on installing mainboard
If you have purchased a separate mainboard, you can install the mainboard in your system in
accordance with the following brief instructions.
The activities described here assume a basic knowledge of PCs and cannot be carried out by a
layperson. If you are not sure whether you have the necessary specialised knowledge, then leave
this work to an expert.
The illustrations of the system show examples of possible cases.
Prior to installation
ÊPlease take note of the safety information in the "Important notes" chapter.
ÊCheck whether the processor, memory modules and power supply are suitable for this
mainboard:
−(see "Replacing processor" chapter).
−(see "Upgrading main memory" chapter).
−(see "Electrical Properties" chapter).
ÊMake sure the current requirement of the fans (processor, case) does not exceed the
loadability of the fan connections (see chapter entitled "Electrical Properties").
ÊFirst only install the components absolutely necessary (graphics card, processor and heat sink,
one memory module) and only connect the required connections (power supply unit, case
connections such as ATX on/off switch, hard disk or floppy disk drive). You should not install
additional cards and devices until this minimum configuration successfully boots (see chapter
entitled "Add-on modules / Upgrading".

Brief instructions on installing mainboard
6 - English A26361-D1555-Z120-1-6319
Installation
ÊEquip the mainboard with the processor, heat sink and memory modules before installation if
possible. Further information can be found in "Replacing processor" chapter.
ÊOpen the casing as described in the
operating manual.
ÊShould no suitable connection field be
provided in the case, then you must
install the connection field (1) provided.
Ensure the plate is aligned properly so that
the connections are suitable for the
mainboard later.
ÊSet the mainboard on the edge on
which the connection field is located (2)
and then insert the board in the
case (3).
Make sure that spacers in the housing are
only mounted at points at which there are
mounting holes in the mainboard.
ÊFasten the mainboard with the screws.
ÊConnect the plugs for the power supply, control panel and drives to the corresponding
connections on the mainboard.
Driver installation
ÊInstall the drivers for the chipset. You may find the driver on the "Drivers & Utilities" CD. Please
refer to chapter "Drivers" for a description of installing drivers.

A26361-D1555-Z120-1-6319 English - 7
Interfaces and connectors
The positions of the interfaces and connectors are shown on page "Cover".
The components and connectors marked are not necessarily present on the mainboard.
External ports
The positions of the external ports are shown on page "Cover".
PS/2 keyboard port, purple PS/2 mouse port, green
Serial interface, turquoise Parallel port/Printer, burgundy
LAN LAN connector USB - Universal Serial Bus, black
Audio output (Line out), light green Microphone jack (mono), pink
Audio input (Line in), light blue
LAN connector
This mainboard has an ADMtek AN983B LAN controller. The LAN controller is equipped with a 2 KB
transmission and receiving buffer (FIFO) and supports WOL function through Magic Packetä.
The LAN RJ45 connector has two LEDs (light emitting diodes).
1
2
1 = a connection exists (e.g. to a hub).
2 = Link Mode: the LAN connection is active.
WOL mode: a Magic PacketTM is being
received.
Internal ports and connectors
The positions of the internal ports and connectors are shown on the Cover. Additional information on
some ports is also provided here.
Hard disk connection
An ultra ATA/66, ultra ATA/100 or ultra ATA/133 hard disk must be connected with a cable
especially designed for the ultra ATA/66, ultra ATA/100 or ultra ATA/133 mode.
ÊConnect the end of the cable marked with blue to the mainboard.

Pin assignment of internal ports
8 - English A26361-D1555-Z120-1-6319
Pin assignment of internal ports
The pin assignment of some internal connections is shown in English and/or German in the
following.
i
Some of the following connectors may be optional!
Bedienfeld / Front panel
Watch the poling of the LEDs. The positive pole
of the connection cables is often indicated with a
coloured wire.
1
2
HD-LED1)
Power On/Off
Reset1)
Power On
LED1) 3)
Connection Note
Reset
Power On/Off
HD LED
Power On LED Indicates the system state APM or ACPI together with the Sleep LED (see
chapter entitled "APM and ACPI system status, energy-saving modes").
USB
C/D - dual channel
E/F - dual channel
(internal or external via special cable)
1 2
Pin Signal Pin Signal
1 VCC C 2 VCC D
3 Data negative C 4 Data negative D
5 Data positive C 6 Data positive D
7 GND 8 GND
9 Key 10 not connected

Pin assignment of internal ports
A26361-D1555-Z120-1-6319 English - 9
Audio-Bedienfeld / Audio front panel 1 2
Pin Signal Pin Signal
1 Micro input 2 Analog GND
3 Micro bias 4 Analog VCC
5 Right line output 6 Right line return
7 not connected 8 Key
9 Left line output 10 Left line return
If the audio front panel is not used, you must plug jumpers on pinpairs 5/6 and 9/10.
Audio S/PDIF 1
Pin Signal
1VCC
2 SPDIF out
3GND
CD-ROM audio
1
Pin Signal
1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input

Pin assignment of internal ports
10 - English A26361-D1555-Z120-1-6319
Lüfter 1 / Fan 1
(processor fan - only for 3 pin fans)
1
Pin Signal
1GND
2 Fix Fan voltage (+12 V, max. 1 A)
3 Fan sense
Lüfter 2 / Fan 2
(system fan - only for 3 pin fans)
1
Pin Signal
1GND
2 Fix Fan voltage (+12 V, max. 1 A)
3 Fan sense
Stromversorgung ATX12 V /
Power supply ATX12 V 13
Pin Signal Pin Signal
1 GND 2 GND
3 +12 V 4 +12 V