Fujitsu Siemens Computers D1409 User manual

Technical Manual
Mainboard D1409
English
answers
2

Sie haben ...
... technische Fragen oder Probleme?
Wenden Sie sich bitte an:
• Ihren zuständigen Vertriebspartner
• Ihre Verkaufsstelle
Weitere Informationen finden Sie im Handbuch "Sicherheit und Ergonomie".
Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet:
http://www.fujitsu-siemens.com
Are there ...
... any technical problems or other questions you need clarified?
Please contact:
• your sales partner
• your sales outlet
You will find further information in the manual "Safety and Ergonomics".
The latest information on our products, tips, updates, etc., can be found on the Internet under:
http://www.fujitsu-siemens.com

Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Bestell-Nr./Order No.: A26361-D1409-Z120-1-7619
Printed in the Federal Republic of Germany
AG 0306 03/06
A26361-D1409-Z120-1-7619

Mainboard D1409
Technical Manual
English
March 2006 edition

Intel ist ein eingetragenes Warenzeichen der Intel Corporation, USA.
PS/2 ist ein eingetragenes Warenzeichen von International Business Machines, Inc.
Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen
der jeweiligen Inhaber und werden als geschützt anerkannt.
Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des
Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren.
Zuwiderhandlungen verpflichten zu Schadenersatz.
Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung.
Liefermöglichkeiten und technische Änderungen vorbehalten.
Copyright Fujitsu Siemens Computers GmbH 2003
Intel is a registered trademark of Intel Corporation, USA.
PS/2 is a registered trademark of International Business Machines, Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.

A26361-D1409-Z120-1-7619
Contents
Introduction........................................................................................................................................... 1
Notational conventions................................................................................................................. 1
Important notes..................................................................................................................................... 1
Information about boards.............................................................................................................. 2
Features ............................................................................................................................................... 3
Interfaces and connectors............................................................................................................ 4
Temperature / System monitoring................................................................................................ 5
LAN connector.............................................................................................................................. 6
ISA bus resources........................................................................................................................ 6
PCI bus resources........................................................................................................................ 7
PCI slots............................................................................................................................... 7
PCI IRQ line x - Assignment of the PCI interrupts................................................................ 7
Screen resolution.......................................................................................................................... 8
SCSI/Host RAID configuration utility............................................................................................9
Starting the SCSI/Host RAID configuration programme....................................................... 9
Terminating the SCSI/Host RAID configuration programme.............................................. 10
Activating and Configuring Host RAID ............................................................................... 10
Default Settings in the menu Configure/View SCSI Controller Settings............................. 11
SCSI Bus Interface Definitions........................................................................................... 12
Additional Options..............................................................................................................12
SCSI Device Configuration................................................................................................. 13
Advanced Configuration Options........................................................................................ 14
SCSI Disk Utilities ...................................................................................................................... 15
Verify.................................................................................................................................. 15
Format Disk........................................................................................................................ 15
Settings with switches ........................................................................................................................ 16
Recovering System BIOS - switch 1........................................................................................... 16
Skipping the password query - switch 2..................................................................................... 16
Write protection for Flash BIOS - switch 3.................................................................................. 16
Write protection for floppy disks - switch 4 ................................................................................. 16
Add-on modules ................................................................................................................................. 17
Slot sequence............................................................................................................................. 18
Installing the processor with heat sink and fan........................................................................... 19
Mounting heat sink............................................................................................................. 19
Upgrading main memory............................................................................................................ 20
Replacing lithium battery............................................................................................................ 22
Glossary ............................................................................................................................................. 23

A26361-D1409-Z120-1-7619 English - 1
Introduction
This technical manual describes the mainboard D1409, which can be equipped with up to two Intel
processors.
You will find further information in the "BIOS Setup" description.
Further information about drivers is provided in the readme files on the hard disk, on the supplied
drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD.
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!
Pay particular attention to text marked with this symbol. Failure to observe this warning
endangers your life, destroys the device, or may lead to loss of data.
i
Supplementary information, remarks, and tips follow this symbol.
Ê Text which follows this symbol describes activities that must be performed in the order shown.
Ë This symbol indicates that you must enter a blank space (press the Space Bar) at this point.
ÚThis symbol indicates that you must press the Enter key.
Text in this typeface indicates screen outputs.
Text in this bold typeface indicates the entries you make via the keyboard.
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters or terms.
Important notes
With the mainboard installed you must open the system to access the mainboard. How to dismantle
and reassemble the system is described in the operating manual accompanying the system.
Connecting cables for peripherals must be adequately shielded to avoid interference.
!
Observe the safety notes in the operating manual of your system.
Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore
essential to observe the instructions in the "Add-on modules" - "Replacing lithium battery"
section.
Components can become very hot during operation. Ensure you do not touch
components when making extensions to the mainboard. There is a danger of burns!
Connecting cables for peripherals must be adequately shielded to avoid interference.

Important notes
2 - English A26361-D1409-Z120-1-7619
The shipped version of this board complies with the requirements of the EEC
directive 89/336/EEC "Electromagnetic compatibility".
Compliance was tested in a typical PC configuration.
When installing the board, refer to the specific installation information in the
operating manual or technical manual for the receiving device.
Connecting cables for peripherals must be adequately shielded to avoid interference.
!
Components can become very hot during operation. Ensure you do not touch
components when making extensions to the mainboard. There is a danger of burns!
i
The warranty is invalidated if the device is damaged during the installation or replacement
of system expansions. Information on which system expansions you can use is available
from your sales outlet or the customer service centre.
Information about boards
To prevent damage to the mainboard, the components and conductors on it, please take great care
when you insert or remove boards. Take great care to ensure that extension boards are slotted in
straight, without damaging components or conductors on the mainboard, or any other components,
for example EMI spring contacts.
Remove the plug from the mains outlet so that system and mainboard are totally disconnected from
the mains voltage.
Be careful with the locking mechanisms (catches, centring pins etc.) when you replace the
mainboard or components on it, for example memory modules or processors.
Never use sharp objects (screwdrivers) for leverage.
Boards with electrostatic sensitive devices (ESD) are identifiable by the label shown.
When you handle boards fitted with ESDs, you must, under all circumstances,
observe the following:
• You must always discharge static build up (e.g. by touching a grounded object)
before working.
• The equipment and tools you use must be free of static charges.
• Remove the power plug from the mains supply before inserting or removing
boards containing ESDs.
• Always hold boards with ESDs by their edges.
• Never touch pins or conductors on boards fitted with ESDs.

Features
A26361-D1409-Z120-1-7619 English - 3
Features
• ServerWorks GC LE533 chipset
• two processor sockets for Prestonia or Nocona processors with 2.2 GHz and higher,
socket 604, with 133 MHz Front Side Bus and quad pumped data bus
• 512 Kbyte second level cache
• 6 slots for main memory. PC2100 modules (registered DDR DIMM memory modules with
266 MHz and ECC) for 256 Mbyte up to 12 Gbyte main memory
• two 64 bit hot-plug PCI-X slots with 100 MHz
• one 64 bit PCI-X slot with 100 MHz (prepared for ZCR)
• one 64 bit PCI-X slot with 133 MHz (prepared for riser card E313)
• one 64 bit PCI slot with 33 MHz (long design possible)
• SCSI controller AIC7902 Ultra 320 capable, two-channel; board supports Zero Channel RAID
(with Host RAID function)
• Screen controller ATI Rage XL VGA onboard with 230 MHz RAMDAC and 8 Mbyte SDRAM
memory
• IPMI ServerWorks CIOB-E (Champion I/O Bridge Ethernet) GbE Ethernet LAN controller
• Server management with BMC (FSC system) onboard
• two IDE interfaces ATA100 capable, support PIO mode 0-4
• Floppy port (34 pin classical for TX300 and 26 pin fineprint for RX300)
• one external parallel interface (ECP- and EPP-compatible)
• two external serial ports (COM1 and COM2)
• two external and two internal USB1.1 ports
• two external RJ45 LAN ports
• two external PS/2 interfaces for keyboard and mouse
• system monitoring

Features
4 - English A26361-D1409-Z120-1-7619
Interfaces and connectors
1 2 3 4 5
6
7
8
9
10
11
12
13
15161718192021
22
14
23
1 = Floppy disk drive (TX300)
2 = Floppy disk drive (RX300)
3 = Power supply ATX
4 = PC98
5 = Power supply 12 V
6 = Fan connector for CPU 0
7 = Fan connector for CPU 1
8 = Hot-plug panel (TX300)
9 = Control panel
10 = USB ports 2 / 3
11 = IDE drives (primary)
12 = IDE drives (secondary)
13 = IPMB
14 = Connector NMI key
15 = Reset
16 = Cover monitoring
17 = SCSI channel B
18 = SCSI channel A
19 = Switch block
20 = HD LED
21 = Hot-plug panel (RX300)
22 = RSB (Remote Service Board) power supply
23 = External ports

Features
A26361-D1409-Z120-1-7619 English - 5
External ports
12 3
45678
1 = PS/2 mouse port
2 = Serial port COM2
3 = Parallel port LPT
4 = LAN connectors
5 = VGA port
6 = USB ports (2x)
7 = Serial port COM1
8 = PS/2 keyboard port
The components and connectors marked are not necessarily present on the mainboard.
Temperature / System monitoring
Temperature and system monitoring aim to reliably protect the computer hardware against damage
caused by overheating. In addition, any unnecessary noise is also prevented by reducing the fan
speed, and information is provided about the system status. Cover monitoring protects the system
from unauthorised opening.
The temperature and system monitoring are controlled by an onboard controller developed by Fujitsu
Siemens.
The following functions are supported:
Temperature monitoring:
Measurement of the processor temperature, measurement of the system temperature with an
onboard temperature sensor, measurement of the ambient temperature with a temperature sensor.
Fan monitoring:
Fans that are no longer available, blocked or sticky fans are detected. Blocked or sticky fans are
operated with 12 V pulse voltage. Fans removed while the system is switched off are signaled by the
Display news LED when the system is switched on again and processed by the BIOS or the
application.
Fan control:
The fans are regulated according to temperature.
Sensor monitoring:
The removal of, or a fault in, a temperature sensor is detected. Should this happen all fans monitored
by this sensor run at maximum speed, to achieve the greatest possible protection of the hardware.
Temperature sensors removed while the system is switched off are signaled by the Display news LED
and processed by the BIOS or the application.
Cover monitoring:
Unauthorised opening of the cover is detected, even when the system is switched off. However, this
will only be indicated when the system is switched on again.

Features
6 - English A26361-D1409-Z120-1-7619
LAN connector
This mainboard has a ServerWorks CIOB-E. This LAN controller supports the transfer rates of
10 Mbit/s, 100 Mbit/s and 1 Gbit/s. The LAN controller is equipped with a 512 byte transmission and
receiving buffer (FIFO) and supports WOL function through Magic Packet.
It is also possible to boot a device without its own boot hard disk via LAN. Here Broadcom PXE is
supported.
The LAN RJ45 connector is equipped with an orange/green and a green LED (light emitting diode).
12
1 = Orange/green indicator
2 = Green indicator
Green LAN activity
Orange/green LAN speed.
off: 10 Mbit/s or no connection
Green: 100 Mbit/s
Orange: 1 Gbit/s
ISA bus resources
Device IRQ Address DMA
Keyboard 1 060, 064
Serial port COM2 3 03F8, 02F8, 03E8, 02E8
Serial port COM1 4 03F8, 02F8, 03E8, 02E8
5
Floppy disk drive controller 6 03F0-3F5, 3F7 2
Parallel interface LPT1 7 0278, 0378, 03BC 0, 1, 3
Real-time clock (RTC) 8 070-071
free 9, 10, 11
Mouse controller 12
Numeric processor 13 0F0-0FE
IDE controller 14 1F0-1F7
free 15
"IRQ" = interrupt assigned as shipped
"Address" = this address can be used for your particular device
"Address" = this DMA can be used for your particular device
Default settings are shown in bold print.

Features
A26361-D1409-Z120-1-7619 English - 7
PCI bus resources
PCI slots
The following table shows an overview of the PCI slots:
PCI slot 64bit/32b
it Frequency in MHz Hot plug PCIX Description
1 64 bit 100 yes yes 64 bit PCI bus slot
2 64 bit 100 yes yes 64 bit PCI bus slot
3 64 bit 100 no yes 64 bit PCI bus slot, prepared for
ZCR (= Zero Channel RAID)
4 64 bit 133 no yes 64 bit PCI bus slot, prepared for
riser card E313
5 64 bit 33 no no 64 bit PCI bus slot (short)
PCI IRQ line x - Assignment of the PCI interrupts
PCI IRQ Line x defines which ISA interrupts are used for the separate PCI slots.
If you select Auto in the BIOS setup, the interrupts are assigned automatically and no further settings
are required.
Multifunctional PCI boards or boards with an integrated PCI-to-PCI bridge can use several PCI
interrupts (INTA#, INTB#, INTC#, INTD#). Monofunctional PCI boards (default) only use one PCI
interrupt (INTA#) per PCI slot.
The PCI interrupts INTA#, INTB#, INTC# and INTD# are available for each PCI slot, however only 2
are routed further for PCI slot 5, as A and C as well as B and D are interrelated.
The same interrupt can be assigned simultaneously to several PCI boards. You should avoid this
condition due to reduced performance.
If you use a setting other than Auto, the Plug&Play functionality of the system BIOS for the
corresponding PCI boards is deactivated.
Auto The PCI interrupts are assigned automatically in accordance with the Plug&Play
guidelines.
Disabled No ISA interrupt is assigned to the PCI interrupt.
3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15
The selected ISA interrupt is assigned to the PCI interrupt. You may not select an ISA
interrupt that is used by a component on the mainboard (e.g. controller) or an ISA
board.

Features
8 - English A26361-D1409-Z120-1-7619
A B C D
Slot 1 PCI IRQ line 4 PCI IRQ line 5 PCI IRQ line 6 PCI IRQ line 7
Slot 2 PCI IRQ line 6 PCI IRQ line 7 PCI IRQ line 4 PCI IRQ line 5
Slot 3 PCI IRQ line 8 PCI IRQ line 9 PCI IRQ line 10 PCI IRQ line 11
Slot 4 PCI IRQ line 12 PCI IRQ line 13 PCI IRQ line 14 PCI IRQ line 15
Slot 5 PCI IRQ line 0 PCI IRQ line 1 PCI IRQ line 0 PCI IRQ line 1
Slot 7 PCI IRQ line 13 PCI IRQ line 14 PCI IRQ line 15 PCI IRQ line 12
Slot 8 PCI IRQ line 14 PCI IRQ line 15 PCI IRQ line 12 PCI IRQ line 13
Slot 9 PCI IRQ line 15 PCI IRQ line 12 PCI IRQ line 13 PCI IRQ line 14
VGA - - - -
SCSI* PCI IRQ line 10 PCI IRQ line 11
LAN** PCI IRQ line 2 PCI IRQ line 3 - -
USB - - - -
A..D = Interrupt output of the PCI controller
* : Interrupts of SCSI channel A respective B.
** : LAN interrupts are not PCI specific.
Slots 7 ... 9 are only available if a PCI expansion board is installed in slot 4.
Screen resolution
Depending on the operating system used the screen resolutions in the following table refer to the
screen controller on the mainboard. If you are using an external screen controller, you will find details
of supported screen resolutions in the operating manual or technical manual supplied with the
controller.
Screen resolution Refresh rate (Hz) Max. number of colours
640x480 200 16.7 mio.
800x600 200 16.7 mio.
1024x768 150 16.7 mio.
1152x864 120 16.7 mio.
1280x1024 100 16.7 mio.
1600x1200 75 16.7 mio.
Shaded screen resolutions are not supported by LCD monitors (TFT).

Features
A26361-D1409-Z120-1-7619 English - 9
SCSI/Host RAID configuration utility
The BIOS of the onboard U320 SCSI controller includes a menu-driven SCSI/Host RAID
configuration programme. This programme allows you to change almost all of the option settings of
the SCSI controller.
When you boot the system a SCSI/Host RAID-BIOS message listing the SCSI devices connected is
displayed.
i
If an SCSI/Host RAID-BIOS error message appears or problems arise with SCSI devices,
please read the documentation of your SCSI device.
If you are unable to trace or rectify the error, please contact your dealer or our customer
service centre.
Working with the keyboard
Use the following keys when running the programme:
ËÊ to make selections
Úto accept a selection
[ESC] to call the previous menu and to terminate the SCSI configuration programme.
[F6] to reset to the default settings. This function is not possible in all menus.
Starting the SCSI/Host RAID configuration programme
Ê Start the PC, if the following message appears, press the key combination [Ctrl] and [A]:
Press <Ctrl> <A> for SCSI Select (TM) Utility!
In the first menu the available U320 SCSI controller are displayed. The onboard SCSI controller of
D1409 is displayed with the following entry:
AIC-7902 at slot 00 00:04:00
When choosing the AIC-7902 you are taken to the top level of the configuration menu of this
controller. The following options cannot be displayed.
Host RAID is disabled (default):
Configure/View SCSI Controller Settings
SCSI Disk Utilities
Enable Host RAID Support
Host RAID is enabled:
Configure/View SCSI Controller Settings
Configure/View Host RAID Settings
SCSI Disk Utilities
Disable Host RAID Support

Features
10 - English A26361-D1409-Z120-1-7619
Terminating the SCSI/Host RAID configuration programme
Depending on the current menu level, you can display the previous menu by pressing the [ESC] key.
If you have made changes in the current menu you will be prompted to store them.
Ê To quit the Configuration programme press the [ESC] key until a corresponding message is
displayed. Select Yes to quit.
Activating and Configuring Host RAID
To configure Host RAID select the menu entry Configure/View Host RAID Settings.If this entry is not
displayed you have to activate Host RAID with the entry Enable Host RAID Support.
Now the existing SCSI hard disks and already configured RAID drives are displayed.
Select one of the displayed hard disks and configure the RAID-System to your needs.
i
Detailed instruction on the configuration of Host RAID are contained in the Host RAID
User's Guide.
The administration of the RAID system can be set later by a tool in your operating system
(see therefor the documentation "Storage Manager Browser Edition"). this tool currently is
available for Windows NT4 and Windows 2000.

Features
A26361-D1409-Z120-1-7619 English - 11
Default Settings in the menu Configure/View SCSI Controller Settings
SCSI Bus Interface Definitions Default setting
SCSI Controller ID 7
SCSI Controller Parity Enabled
SCSI Controller Termination Enabled
Additional Options Default setting
Boot Device Configuration Press <Enter>
Single Image
Master SCSI Controller AIC-7902 at slot 00 00:04:00
Select SCSI peripheral from which to boot
Boot SCSI Controller AIC-7902 at slot 00 00:04:00
Boot SCSI ID 0
Boot LUN number* 0
SCSI Device Configuration Press <Enter>
Sync Transfer Rate (MB/Sec) 320
Packetized Yes
QAS Yes
Initiate wide negotiation Yes (Enabled)
Enable disconnection Yes (Enabled)
Send Start Unit Command**** Yes
BIOS Multiple LUN Support No
Include in BIOS Scan Yes
Advanced Configuration Press <Enter>
Reset SCSI Bus at IC Initialization Enabled
Display <Ctrl><A> Message During BIOS Initialization Enabled
Extended Int 13 Translation for DOS Drives > 1Gbyte Enabled
POST Display Mode Verbose
SCSI Controller Int 13 Support Enabled
Domain Validation**** Enabled
Support Removable Disks under Int 13 as Fixed Disks**** Disabled
BIOS Support for Bootable CD-ROM**** Enabled
* The setting is valid only if Multiple LUN Support is enabled (Enabled).
**** The setting is valid only if the Int 13 Support of the SCSI controller is enabled (Enabled).

Features
12 - English A26361-D1409-Z120-1-7619
SCSI Bus Interface Definitions
SCSI Controller ID
All SCSI devices on one SCSI bus, including the SCSI controller, must be set to separate SCSI
addresses.
The SCSI controller is normally set to ID 7.
You do not normally need to change the SCSI address, not even if you install several SCSI
controllers. In this case each SCSI controller may be assigned address 7, because each is
connected to it’s own SCSI bus.
SCSI Controller Parity
The U320-SCSI controller uses parity bits on the SCSI bus to verify the data transfer from your SCSI
bus (Enabled).
If one of your SCSI devices does not support Parity Checking, disable it on the SCSI controller.
SCSI Controller Termination
The terminating resistors of the SCSI controller must be enabled.
!
The default setting is Enabled. The terminating resistor of the SCSI controller is enabled.
With [F6] you can reset to the default setting.
Additional Options
Master SCSI Controller
These settings display from which of the available SCSI controller the BIOS is loaded. As long as the
onboard SCSI controller AIC-7902 is activated, only this one is the master controller.
Boot SCSI Controller
This setting defines from which of the available SCSI controller is booted.
Boot Target ID
The U320-SCSI controller can start the operating system from a drive with any SCSI address (ID).
The default setting is SCSI ID 0. The SCSI ID selected here must correspond to the ID configured on
the boot device.
Boot LUN number
If your boot device has multiple LUNs (Logical Unit Numbers) and Multiple LUN Support is Enabled,
this option allows you to specify which LUN to boot from on your boot device. The default setting is
LUN 0.