Fujitsu P2410 Series User manual

Display
Operating Manual
FUJITSU Display
Serie P2410 / B2410

Congratulations on your purchase of an innovative
product from Fujitsu.
Latest information about our products, tips, updates etc. can be found on
the Internet at: "http://www.fujitsu.com/fts/"
You can find driver updates at: "http://support.ts.fujitsu.com/download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy working with your new Fujitsu system!

Published by / Contact address in the EU
Fujitsu Technology Solutions GmbH
Mies-van-der-Rohe-Straße 8
80807 Munich, Germany
"http://www.fujitsu.com/fts/"
Copyright
©Fujits
u Client Computing Limited 2021. All rights reserved.
Publication Date
12/2021
Order No.: A26361-K1697-Z320-1-7619, edition 1

P2410 WE / P2410 WS / P2410 WE CAM
P2410 TE / P2410 TS CAM
B2410 WE / B2410 WS
Operating Manual
Your LCD screen... 5
Important notes 7
Getting started 11
Operation 24
Additional information 49
Troubleshooting 64
Technical specification 67
Appendices 77

Remarks
Notes on the product description meet the design requirements of Fujitsu and are
provided for the purposes of comparison. The actual results may differ due to several
factors. Subject to technical changes without prior notification. Fujitsu accepts no
responsibility for technical or editorial mistakes or omissions.
Trademarks
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited in
the United States and other countries.
DisplayView is a registered trademark of Fujitsu Client Computing Limited or its subsidiaries.
Microsoft and Windows are trademarks or registered trademarks of the Microsoft
Corporation in the United States and/or other countries.
VESA is a registered trademark of Video Electronics Standards Association.
TM
The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
USB-C is a trademark of the USB Implementers Forum in the USA and other countries.
VDE is a registered trademark of VDE Verband der Elektrotechnik Elektronik
Informationstechnik e.V. in Germany and/or other countries.
HAR is a registered trademark of VDE Verband der Elektrotechnik Elektronik Informationstechnik
e.V. or other national electrical engineering associations in Germany and/or other countries.
Any other trademarks are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transmitted by any electronic means
without the written consent of Fujitsu.

Contents
Contents
YourLCD screen... ..................................................................... 5
Targetgroup ............................................................................ 5
Furtherinformation ...................................................................... 6
Notational conventions .................................................................. 6
Important notes ........................................................................ 7
Safetyinstructions ...................................................................... 7
Powercable ............................................................................ 8
Transporting the device .................................................................. 8
Cleaning thedevice ..................................................................... 9
CEmarking ............................................................................ 9
Certification marking .................................................................... 9
Disposal and recycling .................................................................. 10
Gettingstarted ......................................................................... 11
Unpacking and checking the delivery . . ................................................... 11
Setting up thedevice .................................................................... 12
Setting up an ergonomic video workstation ............................................ 12
Mounting the monitor base . . . ....................................................... 14
Adjustingheight ..................................................................... 15
Adjustingthe inclination .............................................................. 15
Adjustingthe rotation ................................................................ 15
Removing monitorbase .............................................................. 16
Connecting the device . .................................................................. 17
PSeries ............................................................................ 17
BSeries ............................................................................ 18
Connecting cables to the monitor . . ................................................... 19
Attachingthe cablesto themonitoring ................................................. 20
Connecting cables to the computer ................................................... 20
Driverinstallation ....................................................................... 21
Monitordrivers ...................................................................... 22
Networkdrivers ..................................................................... 23
Operation .............................................................................. 24
Switchingthedeviceonand off .......................................................... 24
Notes on theambientlightsensorand presencesensor .................................... 25
Changingthe monitorsettings ............................................................ 27
Functionsof thecontrol paneland theOSD menu ......................................... 28
Select OSD language . . . . . ........................................................... 28
Settingscreendisplay ............................................................... 29
Configuringthe OSDmenu .......................................................... 30
Configuringthe presencesensor ..................................................... 32
Advanced settingfunctions ........................................................... 34
Displayinginformation ............................................................... 36
Activate/deactivate ECO operating mode . ............................................ 36
Selecting the input signal . ........................................................... 37
Selectingtheapplicationmode ....................................................... 39
Settingcolour temperature andcolours ................................................ 41
Adjustingthevolume ................................................................ 42
Adjustingthebrightnessand contrast ................................................. 44
Lockingthe OSDmenu .............................................................. 45
Fujitsu 3

Contents
Disabling audio settings . . ............................................................ 46
Lockthe ON/OFF button ............................................................. 46
Usingthe DaisyChainfunction ........................................................... 47
Additional information ................................................................. 49
Programme "DisplayView" ............................................................... 49
Presence sensor .................................................................... 50
Rotationfunction .................................................................... 50
Desktoppartitioning ................................................................. 50
Power Management . . . . . ................................................................ 51
USBPowerDelivery (USB-PD) .......................................................... 54
KVMfeature ............................................................................ 55
All-in-onemode ......................................................................... 56
ESPRIMO G ........................................................................ 56
LIFEBOOK /STYLISTIC ............................................................. 57
Monitor ............................................................................. 58
Operating system ................................................................... 59
Networkport ............................................................................ 60
Initialstartup ........................................................................ 60
WakeOnLAN (WOL) ................................................................ 60
MAC Address Pass Through (MAPT) ................................................. 60
Preboot Execution Environment (PXE) . . . ............................................. 61
WebCamand InfraredCamera ........................................................... 61
Lowblue lightfunction ................................................................... 61
colour adjustment, ergonomic ............................................................ 62
Explanatory information about standard ISO 9241-307 . . . .................................. 63
Troubleshooting ....................................................................... 64
Technical specification ................................................................. 67
P2410 WE/WS/WE CAM ................................................................ 67
P2410 TE/TS CAM . . . . . . ................................................................ 69
B2410 WE/WS . . ....................................................................... 71
Displayport socket ...................................................................... 73
HDMIport .............................................................................. 74
USB-Cport ............................................................................. 75
USB-CUpstreamport ................................................................... 76
Appendices ............................................................................ 77
4Fujitsu

Your LCD screen...
Your LCD screen...
has a whole range of useful features and functions, e.g.:
• integrated mechanically lockable webcam with IR, Microsoft Windows Hello feature and
FHD resolution (1920 x 1080) (P2410 WE CAM and P2410 TS CAM model)
• TFT display (Thin Film Transistor; active matrix)
• minimal space requirements thanks to slim casing
• optimum ergonomic characteristics (excellent picture definition and colour
purity right into the corners)
• high degree of brightness and good contrast
• optimal resolution (TE and TS model: 1920 x 1080 / WE and WS model: 1920 x 1200)
• presentation of up to 1,07 billion colours (in conjunction with an appropriate graphics card)
• automatic scanning of horizontal frequencies from 30 to 82 kHz and refresh rates
(vertical frequencies) from 48 to 76 Hz (absolutely flicker-free)
• Digital screen controller with microprocessor for storing 36 different display modes
• freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
• convenient operation via integrated OSD (On-Screen-display) menu
• VESA-DDC compatibility
• VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device for swivel arm or a similar accessory
• Plug&Play capability
• Digital video inputs (USB-C, DisplayPort and HDMI) with HDCP
• power management for reducing power consumption when the computer is not in use
• Compliance with the recommendations according to the latest TCO requirements
• the monitor fulfills all GS ("Geprüfte Sicherheit", Certified Security) requirements.
This operating manual contains important information you require to start up and run your LCD monitor.
A digital graphics card with display port and/or USB-C interface or a video signal source with
HDMI interface is required to control the LCD monitor. B-series monitors can alternatively
be controlled via an analogue VGA or DVI-D interface. The monitor processes the data
supplied to it by the graphics card. The graphics card or the corresponding driver software
is responsible for setting the modes (resolution and refresh rate).
When putting the monitor into operation for the first time, the screen display should be
optimally adapted to the display adapter used and adjusted in accordance with your
needs (see chapter "Changing the monitor settings", Page 27).
Target group
You don’t need to be an "expert" to perform the operations described here.
Nonetheless, it is important to always observe the safety notes given in the operating
instructions for the computer and in this manual.
In the event of any problems, please contact your sales office or our Service Desk.
Fujitsu 5

Your LCD screen...
Further information
Details of how you set the resolution and refresh rate are provided in the documentation
for your display adapter and the associated driver software.
For ergonomic reasons, we recommend a screen resolution of 3440 x 1440 pixels.
Because of the technology used (active matrix) an LCD monitor provides a totally
flicker-free picture even with a refresh rate of 60 Hz.
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font" indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://www.fujitsu.com/fts/"
• Names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD Drivers & Utilities" or "Safety" Manual
Key indicates a button on the monitor, e.g: MENU
This font indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
6Fujitsu

Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety instructions
This device complies with the relevant safety regulations for data processing equipment,
including electronic office machines for use in an office environment. If you have
any questions about whether the device can be used in the intended environment,
please contact your sales office or our Service Desk.
• The display surface of the device is sensitive to pressure and scratches. You should therefore
be careful with the display surface in order to avoid lasting damage (scratches).
• If the device is brought into the installation site from a cold environment, condensation
can form. Before operating the device, wait until it is absolutely dry and has reached
approximately the same temperature as the installation site.
• When installing and operating the device, please observe the notes on environmental
conditions in Chapter "Technical specification", Page 67 as well as the instructions in
Chapter "Setting up an ergonomic video workstation", Page 12.
• To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear.
• The device automatically sets itself to the correct voltage within the range from 100 V to 240 V.
Make sure that the local mains voltage is neither higher nor lower than this range.
• Ensure that the power socket on the device and the mains outlet are freely accessible.
• The ON/OFF switch does not disconnect the monitor from the mains voltage. To completely
disconnect from the mains voltage, you must remove the mains plug from the mains socket.
• The device is equipped with a power cable that complies with safety standards.
• Use the supplied power cable only.
• Lay the cables in such a way that they do not create a hazard (danger of tripping)
and cannot be damaged. When connecting the device, observe the relevant
notes in chapter "Connecting the device", Page 17.
• No data transfer cables should be connected or disconnected during a thunderstorm.
• Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get
inside the device (danger of electric shock, short circuit).
• The device is not waterproof! Never immerse the device in water and protect
it from spray water (rain, sea water).
• In an emergency (e.g. damaged casing, operation controls or cables, penetration
of liquids or foreign matter), switch off the device, disconnect the power plug
and contact your sales outlet or our Service Desk.
• Repairs to the device must only be performed by qualified technicians. Unauthorised opening
and incorrect repair may greatly endanger the user (electric shock, fire risk).
• Only use the screen resolution settings and refresh rates specified in Chapter "Technical
specification", Page 67. Otherwise you may damage the device. If you are in any
doubt, contact your sales outlet or our Service Desk.
•Usea
screen saver with moving images and activate the power management for
your monitor to prevent still images from "burning in".
• If you operate the device with the swivel arm or a similar accessory, it must not be turned by 180°.
Fujitsu 7

Important notes
• Store this manual close to the device. If you pass the device on to third
parties, you should pass this manual on with it.
• We recommend that you place your device on a durable, non-slip surface. In view
of the many different finishes and varnishes used on furniture, it is possible that the
feet of the device may mark the surface they stand on.
• The device must be connected to protective earth.
• To prevent possible hearing damage, do not listen at high volume levels for long periods.
• Warning for excessive sound pressure from earphones and headphones:
Excessive sound pressure from earphones and headphones can cause hearing loss.
Adjustment of the equalizer to maximum increases the earphones and headphones
output voltage and therefore the sound pressure level.
Power cable
Use the supplied power cable only.
Use the following guidelines if it is necessary to replace the original cable set.
• The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.
• The cable has to be HAR-certified or VDE-certified. The mark HAR or
VDE will appear on the outer sheath.
• For devices which are mounted on a desk or table, type SVT or SJT cable sets may be
used. For devices which sit on the floor, only SJT type cable sets may be used.
• The cable set must be selected according to the rated current for your device.
• If necessary, replace the original power cable with a regular grounded 3-core mains lead.
Transporting the device
Device,Trans po r ta tio n Retransportation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
8Fujitsu

Important notes
Cleaning the device
Switch off the device and unplug the power plug.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the device.
The display surface of the device is sensitive to pressure and scratches. Clean
it only using a soft, slightly moistened cloth.
The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that
has been moistened in mild domestic detergent and then carefully wrung out.
CE marking
The shipped version of this device complies with the requirements of EU directives 2014/30/EU
"Electromagnetic Compatibility", 2014/35/EU "Low voltage directive", 2009/125/EU "Ecodesign
directive" and 2011/65/EU "RoHS directive".
Certification marking
The certification mark is affixed near the VESA mounting surface. It becomes
visible once the stand is removed.
1
1=Certification marking
Fujitsu 9

Important notes
Disposal and recycling
This device has been manufactured as far as possible from materials which can be recycled or
disposed of in such a way that the environment is not damaged. The device may be taken back after
use to be reused or recycled, provided that it is returned in a condition that befits its intended use.
Any components not reclaimed will be disposed of in an environmentally acceptable manner.
The device must be disposed of in accordance with the local regulations for disposal of special waste.
If you have any questions on disposal, please contact your local sales office or our
Service Desk, or contact one of the following directly:
Germany Belgium Switzerland
AfB gemeinnützige GmbH
Otto-Stadler-Strasse 6
D-33100 Paderborn
Tel.: [phone]
Fax: [phone]
"https://www.fujitsu.com/de/
about/local/social-responsibility/
environment-care/recycling/"
RECUPEL
Boulevard Reyers, 80
B-1030 Brussels
Tel.: +32 2 / 706 86 16
Fax: +32 2 / 706 86 13
E-mail: "[e-mail]"
"http://www.recupel.be"
SWICO
Schweizerischer
Wirtschaftsverband
der Informations-,
Kommunikations- und
Organisationstechnik
AlistoftheSWICO
acceptance locations
can be found at:
"http://www.swico.ch"
Asia USA
Taiwan:
Environmental Protection
Administration
Executive Yuan R.O.C.
"http://recycle.epa.gov.tw"
Fujitsu America, Inc.
1250E. Arques Avenue
Sunnyvale, CA 94085 U.S.A.
Phone No.: [phone]
You can also find information about this on the Internet at
"https://www.fujitsu.com/emeia/about/local/csr/recycling/".
10 Fujitsu

Getting started
Getting started
Unpacking and checking the delivery
The display surface of the device is sensitive to pressure and scratches.
Always hold the device by the casing!
The complete device package includes:
• one monitor
• one monitor base
• a data cable (DisplayPort)
• a USB-C cable (P-series)
• one USB 3.0 cable (USB-A to USB-B)
• one power cable
•aflyer "Quick Start Guide"
•aflyer "safety instructions"
►Unpack all the individual parts.
►Check the contents of the package for any visible damage caused during transport.
►Check whether the delivery conforms to the details in the delivery note.
►Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Do not discard the original packing material of the devices. You may need the
packaging in the future if you need to transport your device.
Fujitsu 11

Getting started
Setting up the device
To ensure sufficient ventilation, the air inlet and outlet openings of
the device must be kept clear.
Setting up an ergonomic video workstation
1
►Do not position the video workstation
opposite a window (1).
1
►Position the monitor outside the reach
of a light source (1).
12 Fujitsu

Getting started
1
►Position the keyboard where it is
easiest to reach (1).
1
50 cm
►Position the monitor so that the eye distance
to the screen (1) is around 50 cm.
►Position the monitor for optimum viewing
(1). The monitor should under no
circumstances fall outside the permissible
viewing space (2).
Depending on the situation, it may be advisable to use a swivel arm or similar
accessory (VESA FPMPMI), which are available from specialist dealers. For
this purpose the monitor base must be removed beforehand as described
in Chapter "Removing monitor base", Page 16.
Fujitsu 13

Getting started
Mounting the monitor base
Be careful not to scratch the surface of the screen!
Place the device on a stable, flat and clean surface. If necessary, place an anti-slip
cloth on this surface to prevent the device from being scratched.
1
2
3
►Insert the base plate on the foot (1).
►Secure the base plate with the screw (2).
►Lay the monitor on its front on a soft surface.
►Insert the monitor stand into the bracket in the direction of the arrow (3).
14 Fujitsu

Getting started
Adjusting height
The height of the monitor can be adjusted by approximately 150 mm.
1
►Hold the monitor with both hands on
the right and left edge of the casing
and move it up or down (1).
Adjusting the inclination
The inclination of the monitor can be adjusted by -5° (forwards) and +35°
(backwards) from its vertical position.
►Hold the monitor with both hands on the left and right sides of the casing and move
it to the desired angle (see "Adjusting height", Page 15).
Adjusting the rotation
The monitor can be rotated by ±172°.
►Grasp the monitor with both hands on the right and left edge of the casing
and turn it to the desired position.
Fujitsu 15

Getting started
Removing monitor base
Before you can use a swivel arm or a similar accessory, you must remove the monitor base.
The display surface is susceptible to scratching!
Place the device on a stable, flat and clean surface. If necessary, place a slip-resistant
cloth on this surface to prevent the device from being scratched.
1
2
►Switch off the monitor and pull the power
plug out of the power socket.
►Lay the monitor on its face on a soft surface.
►Disconnect all cables.
►Unlock the stand by moving the slider
in the direction of the arrow (1) and
lifting the stand upwards (2).
You can now mount a swivel arm or a
similar accessory in accordance with VESA
FPMPMI using a hole spacing of 100 mm.
For instructions on how to mount the swivel arm or a similar accessory, please
see the documentation for the swivel arm or similar accessory.
The assured ergonomics and safety of the monitor may be limited if the
foot provided for the monitor is not used.
16 Fujitsu