Fujitsu Siemens D1160 User manual

SYSTEM BOARD D1160
SYSTEM BOARD D1160SYSTEM BOARD D1160
SYSTEM BOARD D1160
ADDITIONAL TECHNICAL
ADDITIONAL TECHNICALADDITIONAL TECHNICAL
ADDITIONAL TECHNICAL
MANUAL
MANUALMANUAL
MANUAL

Is there ...
... any technical problem or other
question you need clarified?
Please contact:
• Our Hotline:
Mo-Fr: 8 a.m. - 6 p.m.
Sat: 9 a.m. - 2 p.m.
Tel.: ++49 (0) 180 3777 005
• your sales outlet
The latest information on our products, tips, updates, etc., can be found on the Internet under:
http://www.fujitsu-siemens.com

Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.: A26361-D1160-Z180-5-7619
A26361-D1160-Z180-5-7619A26361-D1160-Z180-5-7619
A26361-D1160-Z180-5-7619
Printed in the Federal Republic of Germany
AG 0100 01/00
A26361-D1160-Z180-1-7619
SYSTEM BOARD D1160 ADDITIONAL TECHNICAL MANUAL

System Board D1160
Additional Technical Manual
En
g
lish
January 2000 edition

Intel, Pentium and Celeron are registered trademarks and MMX and OverDrive are
trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
Copyright ãFujitsu Siemens Computers GmbH 2000
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.

A26361-D1160-Z180-5-7619
Contents
Introduction........................................................................................................................................1
Notational conventions ..............................................................................................................1
Features............................................................................................................................................2
Mechanics.........................................................................................................................................3
Connectors and jumpers............................................................................................................5
Power supply monitoring....................................................................................................5
Power supply ATX connector.............................................................................................5
Front panel connector........................................................................................................6
Fan 2.................................................................................................................................6
Chipcard reader port (internal) or serial port 2 (external via optional cable) .......................7
Fan 4.................................................................................................................................7
Wake on LAN (WOL) connector.........................................................................................7
Intrusion connector for case open detect for optional push button (opener).......................8
IrDA (internal)....................................................................................................................8
I2C connector (primary SMBus) for optional temperature sensor (e.g. LM75).....................8
Auxiliary (MPEG, TV) audio connector (internal)................................................................9
CD-ROM audio connector (internal)...................................................................................9
Fan 1.................................................................................................................................9
Fan 3...............................................................................................................................10
USB chipcard reader .......................................................................................................10
External temperature sensor (thermal SMBus) (LM75, T26139-Y3718-V1) .....................10
Configuration...........................................................................................................................11
Functions controlled by the switch block..........................................................................11
Supported ACPI system states........................................................................................11
ACPI wakeup possibilities................................................................................................11
USB power jumper function description...........................................................................12
BIOS options ...................................................................................................................12
Messages........................................................................................................................12
Power......................................................................................................................................13
Power requirement ..........................................................................................................13
Power loadability..............................................................................................................13
Installing drivers ..............................................................................................................................14
Upgrading main memory .................................................................................................................15
Troubleshooting...............................................................................................................................16
Message BIOS update.............................................................................................................16
The screen stays blank............................................................................................................16

A26361-D1160-Z180-5-7619 1
Introduction
i
This system board is available in different configuration levels. Depending on the
hardware configuration of your device, it may be that you cannot find several options in
your version of the system board, even though they are described.
You may find further information e. g. in the complete Technical Manual for the system board and in
the description "BIOS Setup".
Further information to drivers is provided on the supplied driver diskettes or on the "Drivers &
Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing drivers". The
latest BIOS version or drivers can be found on the internet under http://www.fujitsu-
siemens.com/en/service
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!Pay particular attention to texts marked with this symbol. Failure to observe this warning
endangers your life, destroys the system, or may lead to loss of data.
i
This symbol is followed by supplementary information, remarks and tips.
Ê Texts which follow this symbol describe activities that must be performed in the order shown.
ËThis symbol means that you must enter a blank space at this point.
Ú
ÚÚ
ÚThis symbol means that you must press the Enter key.
Texts in this typeface are screen outputs.
Texts in this bold typeface are the entries you make via the keyboard.
Texts in italics indicate commands or menu items.
"Quotation marks" indicate names of chapters and terms that are being emphasized.

Features
2A26361-D1160-Z180-5-7619
Features
The table shows an assembly version of this system board as example.
Function Version D1160-A1x
Processor socket 2 x slot 1
Processor Intel Pentium II or Pentium
III
Formfactor ATX
Front Side Bus in MHz 66/100/133
Chipset i 820DP
Memory sockets 2 RIMM
ISA slots - -
PCI slots 5
ISA/PCI shared - -
AGP-Port 1
System monitoring x
Thermal Management x
Wake On LAN x
Keyboard On x
IrDA
Chipcard reader x
Save to Disk (ACPI S4) x
Save to RAM(ACPI S3) x
LAN onboard x
Audio onboard AD 1881
VGA onboard - -
4MB Display Cache - -
!Computer system boards and components contain very delicate IC chips. To protect them
against damage caused from electric static, you have to follow some precautions:
• Unplug your computer when you work inside.
• Hold components by the edge, don't touch their leads.
• Use a grounded wrist strap.
Place the system board and the components on a grounded antistatic pad whenever you
work outside the computer. Once you have installed the system board, you should remove
the battery protection (i.e. the thin plastic plate between battery and contact spring).

Mechanics
A26361-D1160-Z180-5-7619 3
Mechanics
Layout
ATX 12"' x 8'' (304,8 mm x 203,2 mm)
Some of the following connectors are optional and may therefore not be included on your system
board.
16
25
7
348
9a9b9c
AGP
PCI 5 PCI 2 PCI 1 PCI 3 PCI 4
1 = PS/2 keyboard port
2 = PS/2 mouse port
3 = Parallel port
4 = Serial port 1
5 = USB port B
6 = USB port A
7 = LAN port
8 = Game/Midi port
9a = Audio Line-Out
9b = Audio Line-In
9c = Audio Micro-In
The components and connectors marked do not have to be present on the system board.

Mechanics
4A26361-D1160-Z180-5-7619
AGP
PCI 5 PCI 2 PCI 1 PCI 3 PCI 4
12 3456789
15
16
17
10
18
11
13
12
19
14
1 = Power supply monitoring
2 = Power supply
3 = IDE drives 3 and 4 (secondary)
4 = Connector for front panel
5 = IDE drives 1 and 2 (primary)
6 = Fan 2 for CPU 1 (processor 1)
7 = Floppy disk drive
8 = Serial chipcard reader interface or serial
port 2
9 = Fan 4 (e. g. for the optional fan (AUX))
10 = Wake On LAN
11 = Intrusion switch
12 = IrDA
13 = I²C (primary SMBus)
14 = AUX-In
15 = CD-In
16 = Fan 1 for CPU 0 (processor 0)
17 = Fan 3 (e. g. for the optional fan (system))
18 = USB chipcard reade
r
19 = Temperature sensor (AUX) (thermal SMBus)
The components and connectors marked do not have to be present on the system board.

Mechanics
A26361-D1160-Z180-5-7619 5
Connectors and jumpers
Some of the following connectors are optional!
Power supply monitoring 1
Pin Signal
1 AC Outlet (high asserted)
2 PS Fan Control (high asserted)
3 PS FAN pulse
4 PS FAN pulse
5 SMB CLK
6 SMB DATA
7 VCC EEPROM (+3.3 V)
8 GND
Power supply ATX connector
10
20
1
11
Pin Signal Pin Signal
1 +3.3 V 11 +3.3 V
2 +3.3 V 12 -12 V
3 GND 13 GND
4 +5 V VCC 14 PS on (low asserted)
5 GND 15 GND
6 +5 V VCC 16 GND
7 GND 17 GND
8 Powergood (high asserted) 18 -5 V
9 +5 V Auxiliary 19 +5 V VCC
10 +12 V 20 +5 V VCC

Mechanics
6A26361-D1160-Z180-5-7619
Front panel connector
1
2
HD-LED1)
1) Cable is not included in the delivery scope.
2) The same interface.
Power On LED1)
Power On/Off
SCSI LED Input 2)1)
Reset
1)
Message LED1)
Speaker2)
Sleep
1)
Pin Signal Pin Signal
1 Not connected 2 Speaker
3 Standby LED (Anode) 4 Key
5 Key 6 GND
7 PON_LED (Anode) 81) VCC or GND
9 PON_LED (Anode) 10 Key pin
11 PON_LED (Cathode/GND)
Standby LED (Cathode/GND) 12 Key pin
13 Message LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low asserted)
19 HD_LED (Anode) 20 SCSI LED input (low asserted)
21 HD_LED (Cathode) 22 Not connected
23 GND 24 Key
25 Power button (low asserted) 26 GND
272) Sleep button (low asserted) 28 GND
29 Reset button (low asserted) 30 GND
1) Pin 8 is connected to VCC if audio is not onboard.
Pin 8 is connected to GND if audio is onboard.
2) The sleep button (optional) functions only for operating systems with APM (not with ACPI).
Fan 2 1
Pin Signal
1 GND
2 Controlled fan voltage (0 V, 6 ... 12 V)
3 Fan sense

Mechanics
A26361-D1160-Z180-5-7619 7
Chipcard reader port (internal) or
serial port 2 (external via optional
cable)
1
2
Pin Signal Pin Signal
1 DCD (low asserted) 2 DSR (low asserted)
3 SIN (high asserted) 4 RTS (low asserted)
5 SOUT (high asserted) 6 CTS (low asserted)
7 DTR (low asserted) 8 PC_ON_Strobe
9 GND 10 VCC auxiliary
11 EXT SMI (low asserted) 12 VCC
13 Not connected 14 GND
15 GND 16 Key
Fan 4 1
Pin Signal
1 GND
2 +12 V
3 FAN sense
Wake on LAN (WOL) connector 1
Pin Signal
1 VCC auxiliary
2 GND
3 Wake pulse (high asserted)

Mechanics
8A26361-D1160-Z180-5-7619
Intrusion connector for case open
detect for optional push button
(opener)
1
Pin Signal
1 GND
2 Case open (low asserted)
3 Intrusion switch present (low asserted)
IrDA (internal)
1
Pin Signal
1 VCC
2 Key
3 IRRX_H
4 GND
5 IRTX_H
I2C connector (primary SMBus) for
optional temperature sensor (e.g.
LM75) 1
Pin Signal
1 3.3 V standby
2 Clock
3 Data
4 GND

Mechanics
A26361-D1160-Z180-5-7619 9
Auxiliary (MPEG, TV) audio
connector (internal)
1
Pin Signal
1 Left AUX audio input
2 Analog GND
3 Analog GND
4 Right AUX audio input
CD-ROM audio connector (internal)
1
Pin Signal
1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input
Fan 1 1
Pin Signal
1 GND
2 Controlled fan voltage (0 V, 6 ... 12 V)
3 FAN sense

Mechanics
10 A26361-D1160-Z180-5-7619
Fan 3 1
Pin Signal
1 GND
2 Controlled fan voltage (0 V, 6 ... 12 V)
3 FAN sense
USB chipcard reader 1
2
Pin Signal Pin Signal
1 +3.3 V standby 2 VCC
3 Data negative up 4 Data positive up
5 Data negative down 6 Data positive down
7 GND 8 GND
9 Not connected 10 +5 V auxiliary
11 +3.3 V 12 Power OK (high asserted)
13 Chipcard reader On (low pulse) 14 Key
External temperature sensor
(thermal SMBus) (LM75, T26139-
Y3718-V1) 1
Pin Signal
1 3.3 V standby
2 Clock
3 Data
4 GND

Mechanics
A26361-D1160-Z180-5-7619 11
Configuration
Functions controlled by the switch block
Function SW1
PWS SW2 RCV SW3 FWP SW4 AUX
Password Skip on X X X
Off off X X X
Recovery BIOS X on X X
Off X off X X
Floppy write protect X X on X
Off X X off X
RTC - Reset and Clear CMOS* X X X on
Off X X X off
* RES is the onboard inscription for RTC
!RES switch must not be in ON position during normal operation!
Supported ACPI system states
• S0 (working) • S4 (OS hibernate)
• S1 (sleeping) • S5 (soft off)
• S3 (save to RAM)
ACPI Switches: On/Off/Sleep/Wake by power button
On/Off/Sleep/Wake by keyboard-button
ACPI wakeup possibilities
Wakeup source Wakeup possible from system states
Power button S1 – S5
Keyboard button S1 – S5
RTC (real-time clock = timer) S1 – S4
Serial chipcard reader S1 – S4
External serial port 1 (ring signal) S1 – S4
PCI-card PME# signal S1 – S4 (3.3V Aux power is provided to PCI cards
by the system board)
Onboard LAN controller S1 – S4
Internal USB chipcard reader S1 – S4
USB device S1 – S4 (5V Aux power is provided to the USB
device by the system board)
Keyboard / mouse S1

Mechanics
12 A26361-D1160-Z180-5-7619
USB power jumper function
description 1
Pin Signal
1 VCC
2 USB power connection
3 VCC_AUX
Jumper 2-3 Default setting:
If the power supply supports auxiliary voltage the USB interface is
permanently powered except when the main supply is plugged off.
Wakeup from ACPI S1-S4 state possible.
Jumper 1-2 The USB interface is only powered in operating state.
Wakeup from ACPI S1 state possible.
BIOS options
Please refer to BIOS description on the including CD-ROM (menu Advanced System Management).
Messages
The Message LED (frontpanel connector) shows two different states:
• A slow blinking (once a second) of the LED signals that any application has received a
message. (ACPI- mode)
• A fast blinking (five times a second) of the LED signals a hardware problem.
The fast blinking LED can have several different causes:
− a necessary sensor is missing or defect
− an available sensor has overtemperature
− a fan is defect or not working properly
− a software is responsible for blinking
i
More detailed information are shown with an additional System Monitoring Software or on
the monitor after reboot entering BIOS Setup (menu Advanced System Management).
BIOS: Please refer to BIOS description on the including CD-ROM.