Fujitsu F2MC-8FX Series User manual

MCU-AN- 500070-E-14
Fujitsu Semiconductor (Shanghai) Co., Ltd.
Setup Guide
F²MC-8FX FAMILY
8-BIT MICROCONTROLLER
MB95330 SERIES
EV BOARD MB2146-440-E
SETUP GUIDE

EV Board MB2146-440-E Setup Guide V1.4
Revision History
MCU-AN-500070-E-14 – Page 2
Revision History
Date Author Change of Records
2009-11-10 Kevin Wang V1.0, First draft
2009-11-30 Kevin Wang V1.1,Modify
2010-01-12 Kevin Wang V1.2,Add speed module
2010-01-26 Kevin Wang V1.3, Modify speed module
2010-02-09 Kevin Wang V1.3,Update EVB picture and SCH
2010-04-19 Kevin Wang V1.4, Update power module.
2010-04-21 Kevin Wang V1.4,Update figure number

EV Board MB2146-440-E Setup Guide
PREFACE
PREFACE
Thank you for purchasing the F2MC-8FX Family EV board: MB2146-440-E.
This product is an EV board for F2MC-8FX MB95330 Series MCU, which comes with MB2146-08-E
(F2MC-8FX Family MB95330 Series BGM Adapter), MB2146-440-E, and F2MC-8L/8FX Family
SOFTUNE Professional Pack Evaluation Version.
This manual explains how to use the EV board. Be sure to read this manual before using the product.
For mass production/evaluation MCUs for this product, consult with sales representatives or support
representatives.
■Handling and Use
Handling and use of this product and notes regarding its safe use are described in the manuals for
products bundled with the EV board.
Follow the instructions in the manuals to use this product.
Keep this manual at hand so that you can refer to it anytime during use of this product.
■Notice on this Document
All information included in this document is current as of the date it is issued.
Such information is subject to change without any prior notice.
Please confirm the latest relevant information with the sales representatives.
Page 1

EV Board MB2146-440-E Setup Guide
PREFACE
■Caution of the Products Described in this DocumentCaution of the Products Described in this Document
The following precautions apply to the product described in this manual.The following precautions apply to the product described in this manual.
Indicates a potentially hazardous situation which, if not avoided appropriately,
could result in death or serious injury and/or a fault in the user’s system.
Indicates a potentially hazardous situation which, if not avoided appropriately,
could result in death or serious injury and/or a fault in the user’s system.
WARNIN
Electric shock,
Damage
Electric shock,
Damage
Before performing any operation described in this manual, turn off all the poweBefore performing any operation described in this manual, turn off all the powe
r
supplies to the system. Performing such an operation with the power on may
cause an electric shock or device fault.
Electric shock,
Damage Once the product has been turned on, do not touch any metal part of it. Doing so
may cause an electric shock or device fault.
Indicates the presence of a hazard that may cause a minor or moderate injury,
damages to this product or devices connected to it, or may cause to lose software
resources and other properties such as data, if the device is not used
appropriately.
CAUTION
Cuts, Damage Before moving the product, be sure to turn off all the power supplies and unplug
the cables. Watch your step when carrying the product. Do not use the product in
an unstable location such as a place exposed to strong vibration or a sloping
surface. Doing so may cause the product to fall, resulting in an injury or fault.
Cuts The product contains sharp edges that are left unavoidably exposed, such as
j
umpe
r
plugs. Handle the product with due care not to get injured with such pointed
parts.
Damage Do not place anything on the product or expose the product to physical shocks. Do
not carry the product after the power has been turned on. Doing so may cause a
malfunction due to overloading or shock.
Damage
Since the product contains many electronic components, keep it away from direct
sunlight, high temperature, and high humidity to prevent condensation. Do not use
or store the product where it is exposed to much dust or a strong magnetic o
r
electric field for an extended period of time. Inappropriate operating or storage
environments may cause a fault.
Damage Use the product within the ranges given in the specifications.
Operation over the specified ranges may cause a fault.
Damage To prevent electrostatic breakdown, do not let your finger or other object come into
contact with the metal parts of any of the connectors. Before handling the product,
touch a metal object (such as a door knob) to discharge and any static electricity
from your body.
Damage Before turning the power on, in particular, be sure to finish making all the required
connections. Furthermore, be sure to configure and use the product by following
the instructions given in this document. Using the product incorrectly o
r
inappropriately may cause a fault.
Damage
A
lways turn the power off before connecting or disconnecting any cables from the
product. When unplugging a cable, unplug the cable by holding the connector part
without pulling on the cable itself. Pulling the cable itself or bending it may expose
or disconnect the cable core, resulting in a fault.
Damage Because the structure of the MCU socket does not allow an evaluation MCU to be
mounted in the incorrect orientation, be very careful of the orientation of the
evaluation MCU when mounting it. Inserting the evaluation MCU in the wrong
orientation may damage the MCU, causing the MCU to become faulty.
Damage Because the product has no casing, it is recommended that it be stored in the
original packaging. Transporting the product may cause a damage or fault.
Therefore, keep the packaging materials and use them in case of for the re-
shipment of the product.
Page 2

EV Board MB2146-440-E Setup Guide
PREFACE
© 2009 FUJITSU SEMICONDUCTOR LIMITED
zThe contents of this document are subject to change without notice.
Customers are advised to consult with sales representatives before ordering.
zThe information, such as descriptions of function and application circuit examples, in this document are
presented solely for the purpose of reference to show examples of operations and uses of FUJITSU
SEMICONDUCTOR device; FUJITSU SEMICONDUCTOR does not warrant proper operation of the
device with respect to use based on such information. When you develop equipment incorporating the
device based on such information, you must assume any responsibility arising out of such use of the
information. FUJITSU SEMICONDUCTOR assumes no liability for any damages whatsoever arising out of
the use of the information.
zAny information in this document, including descriptions of function and schematic diagrams, shall not be
construed as license of the use or exercise of any intellectual property right, such as patent right or
copyright, or any other right of FUJITSU SEMICONDUCTOR or any third party or does FUJITSU
SEMICONDUCTOR warrant non-infringement of any third-party's intellectual property right or other right
by using such information. FUJITSU SEMICONDUCTOR assumes no liability for any infringement of the
intellectual property rights or other rights of third parties which would result from the use of information
contained herein.
zThe products described in this document are designed, developed and manufactured as contemplated for
general use, including without limitation, ordinary industrial use, general office use, personal use, and
household use, but are not designed, developed and manufactured as contemplated (1) for use
accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious
effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss
(i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport
control, medical life support system, missile launch control in weapon system), or (2) for use requiring
extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU
SEMICONDUCTOR will not be liable against you and/or any third party for any claims or damages arising
in connection with above-mentioned uses of the products.
zAny semiconductor devices have an inherent chance of failure. You must protect against injury, damage
or loss from such failures by incorporating safety design measures into your facility and equipment such
as redundancy, fire protection, and prevention of over-current levels and other abnormal operating
conditions.
zExportation/release of any products described in this document may require necessary procedures in
accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or
US export control laws.
zThe company names and brand names herein are the trademarks or registered trademarks of their
res
p
ective owners.
Page 3

EV Board MB2146-440-E Setup Guide
CONTENTS
CONTENTS
REVISION HISTORY.............................................................................................................. 2
PREFACE............................................................................................................................... 1
■Handling and Use.......................................................................................................... 1
■Notice on this Document................................................................................................ 1
■Caution of the Products Described in this Document.................................................... 2
CONTENTS ............................................................................................................................ 4
1BGMA MANUAL.............................................................................................................. 5
1.1BGMA Overview........................................................................................................ 5
1.2Function List.............................................................................................................. 5
1.3IDC10 Interface Description...................................................................................... 6
1.4BGMA USB Configuration......................................................................................... 6
1.5LED Description........................................................................................................ 8
2EV BOARD INTRODUCTION........................................................................................ 10
2.1EV Board Overview................................................................................................. 10
2.2Function List............................................................................................................ 11
2.3EV Board Schematic............................................................................................... 12
2.4HW Module Description .......................................................................................... 13
2.4.1Power Module........................................................................................... 13
2.4.2BGMA Interface......................................................................................... 13
2.4.3Key Module............................................................................................... 13
2.4.4Speed Module........................................................................................... 13
2.4.5LED Module .............................................................................................. 14
2.4.6Feedback Module...................................................................................... 14
2.4.7Motor Drive Module................................................................................... 15
3EV BOARD OPERATION.............................................................................................. 16
3.1Connect the Motor Connector and the Hall Sensor Connector............................... 16
3.2Select the Driving Method as Hall Sensor or Back EMF......................................... 16
3.3Start and Stop Motor............................................................................................... 17
3.4Adjust Motor Speed................................................................................................. 18
3.5Reverse Motor Rotation.......................................................................................... 18
4DEVELOPMENT PLATFORM QUICK START ............................................................. 19
4.1Tools Setup Sequence............................................................................................ 19
4.2Open Project and Start Debug................................................................................ 19
Page 4

EV Board MB2146-440-E Setup Guide
Chapter 1 BGMA Manual
1 BGMA Manual
This chapter gives introduction on how to set up BGMA.
1.1 BGMA Overview
Below is a close look of MB95330 Series BGMA. The part number is MB2146-08-E. It
provides a debugging platform for the MB95330 Series MCU in a small size of 55.7mm (W)
X127mm (D) X30mm (H).
Figure 1.1-1 BGMA Overview
1.2 Function List
ID Function description Remarks
1 Support MB95330 Series MCU MCU MAX machine clock: 16.25 MHz
MCU power voltage: 2.4 V ~ 5.5 V
2 Break pointer 256 software breakpoints
3 USB interface to PC/SOFTUNE Compatible with USB protocol version 1.1
4 1-Line UART interface to the
MB95330 Series MCU The Baud rate is 62,500 bps
5 Support the MCU flash programming
for engineering development The programming and reading speed is about 800 B/S.
Page 5

EV Board MB2146-440-E Setup Guide
Chapter 1 BGMA Manual
1.3 IDC10 Interface Description
Pin Number Pin Name Description
1 UVCC Target MCU VCC
2 GND Target MCU VSS
3 RSTIN Target MCU reset input
4 RSTOUT Target MCU reset output
5 RSV Reserved
6 RSV Reserved
7 RSV Reserved
8 DBG Target MCU debugging pin
9 RSV Reserved
10 RSV Reserved
1.4 BGMA USB Configuration
The BGMA is provided with a USB cable. Connect the BGMA to PC with the USB cable. If
the connection is right, the following window will pop up. Follow the instructions displayed,
and then click Next.
Figure 1.4-1 Install BGMA in Windows (1)
Page 6

EV Board MB2146-440-E Setup Guide
Chapter 1 BGMA Manual
Select Install from a list or specific location (Advanced), then click Next.
Figure 1.4-2 Install BGMA in Windows (2)
Select …\Drivers from the folder where SOFTUNE is installed, click Next.
Figure 1.4-3 Install BGMA in Windows (3)
Page 7

EV Board MB2146-440-E Setup Guide
Chapter 1 BGMA Manual
Page 8
Select BGMA (MB2146-08) as displayed below, and then click Next.
Figure 1.4-4 Install BGMA in Windows (4)
Windows will install the driver automatically. Click Finish after the driver has completed the
installation normally. Then users can find the BGMA is recognized as MB2146-08 in
Windows system.
Figure 1.4-5 BGMA is installed in Windows
1.5 LED Description
First, only plug USB cable to PC; check whether the power LED on BGMA turns green.
Refer to Figure 1.4-1.
Figure 1.5-1 BGMA Power LED (1)
Green USB Plugged to PC

EV Board MB2146-440-E Setup Guide
Chapter 1 BGMA Manual
Second, plug IDC10 cable to the EV board (target MCU board), then turn on EV board. After
that, check whether the power LED on the BGMA turns orange. Refer to Figure 1.4-2.
Orange
Figure 1.5-2 BGMA Power LED (2)
Page 9

EV Board MB2146-440-E Setup Guide
Chapter 2 EV Board Introduction
Page 10
2 EV Board Introduction
2.1 EV Board Overview
MB95330 Series EV board provides a user-friendly evaluation platform for the MB95330
Family microcontroller.
MB95330H/330K MCU EV board PN is MB2146-440-E.
Figure 2.1 is a close look of EV board.
Figure 2.1 EV board Overview
Power circuit
Key
LED
Test pin
Feedback interface
Motor driver circuit
Motor
Debug Interface
Speed

EV Board MB2146-440-E Setup Guide
Chapter 2 EV Board Introduction
2.2 Function List
This MB95330 Motor EV board provides a platform with inverter motor circuit, for user to
evaluate MB95330 series MCU and demo 120 degree inverter driving solution together with
sample code. It features the following functions,
9Provide IDC10 debug interface
9All MCU ports are easy accessible through test pins
9Support 120 degree inverter driving solution, hall sensor or back-EMF
9Support motor start, motor stop, speed increase, speed decrease, reverse.
Page 11

EV Board MB2146-440-E Setup Guide
Chapter 2 EV Board Introduction
2.3 EV Board Schematic
Page 12

EV Board MB2146-440-E Setup Guide
Chapter 2 EV Board Introduction
2.4 HW Module Description
2.4.1 Power Module
Input DC 15V from outside, supply it to motor driver circuit and motor directly, and convert it
to 5V for MCU. The power supply needs as below.
Output voltage: DC 15V
Output Current: >=2A
Connection: Power connector (DC 15V)
2.4.2 BGMA Interface
To start debugging using a BGMA, users can connect IDC10 socket from the BGMA to
BGMA IF on an EV board before power on.
2.4.3 Key Module
The key module controls motor start, stop, and reverse.
Module name Function
Key
START/STOP Motor start and motor stop
REVERSE Clockwise/Counter clockwise
HALL SENSOR/SENSOR LESS Select motor driving method
SW1 Reserve
2.4.4 Speed Module
The speed module can tune the motor speed.
Module name Function
Speed
up/down R59 Speed down: Tune clockwise;
Speed up: Tune anticlockwise.
Page 13

EV Board MB2146-440-E Setup Guide
Chapter 2 EV Board Introduction
2.4.5 LED Module
There are four LEDs on the LED module of EV board. They show the system status.
Module name Function Remark
LED
D8 Show motor status: stopped, running, error
ON Running
OFF Stopped
Winking Error
D9 Show motor running orientation
ON Clockwise
OFF Counter clockwise
D10 Show motor driving method:
hall sensor or Back EMF
ON Hall sensor
OFF Back EMF
D11 Reserve
2.4.6 Feedback Module
The module inputs the motor back EMF signal to MCU.
Page 14

EV Board MB2146-440-E Setup Guide
Chapter 2 EV Board Introduction
2.4.7 Motor Drive Module
The module is designed for driving motor. It features the following functions:
9250V 3.0A 3-phase FRFET inverter including high voltage integrated circuit (HVIC);
9HVIC for gate driving and under voltage protection;
9Optimized for low electromagnetic interference;
9Isolation voltage rating of 1500Vrms for 1min.
Page 15

EV Board MB2146-440-E Setup Guide
Chapter 3 EV Board Operation
3 EV Board Operation
3.1 Connect the Motor Connector and the Hall Sensor Connector
Before power on, connect the motor lines to the motor connector and the hall sensor
connector according to the following direction. Refer to Figure 3.1.
Note: If the driving method is Back EMF, the hall sensor connector should not be connected.
V
U
GND
H3
H2
Motor connector
Hall sensor connector
5V
H1
W
Figure 3.1
3.2 Select the Driving Method as Hall Sensor or Back EMF
If you want to select the hall sensor, the switchers are set as J1(2-3),J2(2-3), and J3(2-3).
Otherwise, the switchers are set as J1(1-3),J2(1-3), and J3(1-3). Switch on the power and
the power LED turns on.When the LED3 is on, it means the FW driving method is B-EMF. If
you want to change the FW driving method, press the hall sensor/B-EMF key when the
motor is stopped. Then, the LED3 turns off. It means the FW driving method is hall sensor.
Refer to Figure 3.2.
Notes: The selection of the FW driving method should match with the selection of switchers.
Page 16

EV Board MB2146-440-E Setup Guide
Chapter 3 EV Board Operation
J3
J2
1 2 3
J1
Hall sensor/B-EMF Key LED3
Figure 3.2
3.3 Start and Stop Motor
When the LED1 is off, it means motor is stopped. If you want to start the motor, press the
start/stop key, and the LED1 turns on. It means motor is running. At the same time, you can
see that motor is rotating. If you want to stop the motor, press the start/stop key again, and
the LED1 turns off. It means motor is stopped. At the same time, you can see that the motor
is stopped. Refer to Figure 3.3.
LED1
Start/stop key
Figure 3.3
Page 17

EV Board MB2146-440-E Setup Guide
Chapter 3 EV Board Operation
3.4 Adjust Motor Speed
If you want to adjust the speed when the motor is running, tuning the potentiometer can
adjust the speed. Refer to Figure 3.4.
Potentiometer
Figure 3.4
3.5 Reverse Motor Rotation
Pressing the reverse key can reverse motor rotation when the motor is stopped. The on and
off of LED2 respectively indicate clockwise and counter clockwise. Refer to Figure 3.5.
LED2
Reverse key
Figure 3.5
Page 18