
Table
1-1
Workflow
for
the
SPARC
M12-1
(continued)
Step
(Work
Time
(*1)) Work
Des ription Referen e
28 Save
XSCF
settin
information
and
lo ical
domain
confi uration
information.
"6.14
Savin
Confi uration
Information"
Required
(*7)
*1 Average work time
*2 Time required for mounting optional components and installing the PCI expansion unit is not included
*3 If the optional components are ordered together with the SPARC M12-1, they are shipped mounted to the SPARC M12-1 If the PCI
expansion unit is also ordered, the optional components (memory, internal storage (HDD/SSD), PCIe card) are shipped mounted to the
PCI expansion unit
*4 In Japan, the link card is shipped mounted to the SPARC M12-1 Outside Japan, the link card is packed and shipped together with the
PCI expansion unit
*5 The physical partition configuration information is already set
*6 One CD-ROM disk containing a CPU Activation certificate is provided with the system The CPU Activation key may be registered
with the system
*7 If you have started Oracle Solaris and changed the configuration of a logical domain, save the logical domain configuration
Note
-
The
SPARC
M12
systems
have
Oracle
Solaris
preinstalled.
Accordin
to
the
purpose,
either
use
the
preinstalled
Oracle
Solaris
as
is
or
reinstall
it.
To
reinstall
Oracle
Solaris,
see
the
Fujitsu
SPARC
M12
Product
Notes
for
the
latest
information
on
the
supported
Oracle
Solaris
versions,
Oracle
VM
Server
for
SPARC
versions,
and
SRUs.
Table
1-2
SPARC
M12-1
Link
Card
Mountin
Maximum
Mountable Link
Card
Mounting
Lo ation
(*1)
3PCI#0
PCI#1
PCI#2
*1 See "Chapter 8 Maintaining the PCI Express Cards" in the Fujitsu
SPARC
M12-1
Service
Manual
Note
-
Restrictions
on
the
number
of
mounted
link
cards
may
apply
dependin
on
the
Oracle
Solaris
version.
For
details,
see
"Chapter
1
PCI
Card
Mountin
Rules
for
the
SPARC
M12-1"
in
the
Fujitsu
SPARC
M12
PCI
Card
Installation
Guide.
1.2 Workflow
for
Adding
the
PCI
Expansion
Unit
The
PCI
expansion
unit
is
a
2U
chassis
with
11
PCI
slots,
and
it
can
connect
to
the
SPARC
M12-1.
When
adding
the
PCI
expansion
unit,
mount
a
link
card
in
the
SPARC
M12-1.
This
section
describes
the
workflow
from
the
installation
of
the
PCI
expansion
unit
to
Fujitsu
SPARC
M12-1
Installation
Guide
・
June
20214