FUNMILY AM003703 US2 User manual

TREADMILL USER’S MANUAL
[e-mail]
CUSTOMER SERVICE
Read all precautions and instructions in this manual before using this
equipment. Keep this manual for future reference.
CAUTION
AM003703_US2

Contents
I
II
III
IV
V
VI
VII
VIII
IX
X
01
04
05
08
13
15
16
17
18
19
IMPORTANT PRECAUTIONS
MAIN TECHNICAL FEATURES
ASSEMBLY
TREADMILL OPERATION
MAINTENANCE
COMMON ERRORS
THE OBVIOUS DANGER LIST
WARRANTY
NOTE
WORKOUT GUIDELINES

I. IMPORTANT PRECAUTIONS
I. IMPORTANT PRECAUTIONS
The security key has a magnet which must be put in the display. At the end of the lace
there is a clamp which should be attached to the clothes.The treadmill will start working
only if the key is placed in the display.This is essential.
-
You must preserve the original packaging with its protections, purchase receipt, manual
and components during the guarantee period.
Before starting any workout programm, consult your doctor. It’s specially important for
people older than 35 years old, people with health problem and pregnant women.
The owner must ensure that all users are correctly informed about the warnings.
Use the equipment as explained in the instructions manual.
In order to decrease the risk of suffering severe injuries, read carefully all the important
instructions and warnings regarding the use of a treadmill before using it.
Our company doesn’t take any responsibility for personal injuries or property damages result-
ing from the use of this product.
WARNING
1
2
3
01

Keep the equipment in an enclosed area, away from dust or humidity. Don’t store it in a
garage, indoor backyard or near the water. Humidity, dust and water could lead to a mal-
function of the equipment, anulling its guarantee.
affected. Some models include levellers or levelling threads behind the legs, helping
the levelling. Please read the manual to verify if your unit is provided with one of them..
The unit must be placed in a ventilated area. Don’t use it in places with sprays or with
oxygen dispenser. The air you breath may be affected and cause an accident.
Keep children younger than 12 years old and pets away from the equipment. Keep the
security distance.
Check in the manual the maximum weight your equipment can support. An excessive
weight could lead to a malfunction in the operating system, which won’t be covered by
the guarantee.
Wear suitable clothes and shoes. Do not use loose clothe that may get hooked.
If your equipment is working through a power supply: make sure that the power cord
and plug are in good conditions. Carry out the connection only when the circuit has
ground connection, otherwise it could cause damages on the equipment or in the prop-
erty which the guarantee won’t cover. Power cords must be away from hot surfaces.
If it is a battery-powered unit: check and make sure that they are charged enough so the
display will fully function.
If your equipment is provided with a security key, please understand the produce before
using it. The security key has a magnet which must be put in the display. At the end of
the lace there is a clamp which should be attached to the clothes.The treadmill will start
working only if the key is placed in the display.THIS IS ESSENTIAL.
If your unit works thanks to a power supply: don’t put it into operation while you are on
the belt. The motor would be innecesarily loaded. The right way is placing yourself with
open legs, each one on a side of the belt and sit up once it is ongoing.
If your unit works with an electric supply: check the speed it can reach, for your security.
The best is to adjust gradually the speed in order to avoid sudden changes.
If your unit works through an electric supply: never leave the machine unattented while
it’s working. Take the security key off, turn the “on“ button into “off“ and unplug the
power cord.
If your equipment is provided with a pulse sensor, you may know it isn’t a medical instru-
ment. It’s designed as a help for the workout and determines the tendencies of heart
rates. There are some factors which could affect the accuracy of the heart rate interpre-
tations, for example the movements of the user.
4
5
6
7
8
9
10
11
12
13
14
15
16
02

The machines don’t take too much space as they can be folded. Once folded, make sure
that all is well assembled to the locking system, either if it has a lock or an hidraulic
engine. Don’t try to move it or raise unless you are insured. Should any damage happen
being the machine uninsured, it won’t be covered by the guarantee.
Check and tighten all screws on a regular basis, because due to vibrations screws and
nuts tend to loosen. Damages caused by a lack of maintenance won’t be covered by the
guarantee.
This lubrication must be performed regularly depending on each person, even before its
electricity supply (in case you have one), pull up the tapestry from the side with one
hand and spread the oil on the board. Please repeat this procedure from the other later-
al side. Connect the equipment to the power supply (in case you have one) and turn the
“on” button (red button) into the correct position (I), insert the security key and let the
treadmill work for several minutes without any weight on it. Repeat this action on a reg-
ular basis.
Two people will be needed in order to take the unit from the package. Otherwise, the
damages caused in this moment won't be covered by the guarantee.
Don't let any object fall into the grooves.
If the unit works through a power cord: unplug always the power cord before cleaning it,
after the workout and before performing any maintenance duty.
This unit is designed for a domestic purpose and in an interior place, not for business
environment or outside.
Do a workout with stretches before and after the sessions, you will avoid injuries.
Drink water before, during and after the workout.
If you start feeling pain or dizziness while training:
The accessories can be different to the other models.
This electronic product can't be thrown under any circumstances into the municipal rub-
bish bins. With the aim of preserving the environment, this product must be recycled
according to the applicable law of your country. Please contact your town council to
know more about this procedure.
Should you need technical assistance or advise with the installation of pieces, You can
get in touch with us.
17
18
19
20
21
22
23
24
25
26
27
28
29
30
03

II. MAIN TECHNICAL FEATURES
Clear safety area of at least 2000mm in length and at least as wide as the treadmill shall
be provided behind the equipment when in use.
31
-
LCD SCREEN
HANDRAIL FOAM
STAND TUBE
STAND TUBE COVER
BASE
SIDE STRIP END CAP
SECURITYTY KEY
RUNNING BELT
MOTOR COVER
1
2
3
4
5
6
7
9
8
10
10
Input Voltage
Frequency
Running area
Function
Speed Range
110V±10%
60 Hz
1230X420mm
Speed Range 0.6-9MPH
Time, Speed, distance, Calorie, heart rate, Bluetooth
speaker,Bluetooth App
04

III. ASSEMBLY
III. ASSEMBLY
Name
1.Main frame 1set
2.Plastic cover
1.Main
No. No.
2.Plastic cover
1pair
M8*20 6 6mm Wrench 1
M8*45 2 Multi Wrench 1
ST4*15 2 Silicone oil 1
M8 Nut 2 User’s Manual 1
Flat washer 8
5mm Wrench 1
Security Key 1
05

according to the picture (make sure not to press the signal wire).
One person hold the electronic watch steady and the other person puts
and screw with
STEP 1
1
2
06

Use screws and to screw up the left and right stand tube with
the electronic watch.
STEP 2
Use screws to fasten the plastic cover at bottom of stand tube.
STEP 3
07

IV. TREADMILL OPERATION
LCD DISPLAY
QUICK INCLINE QUICK SPEED
SPEED +
SPEED -
MODE
STOP
START
INCLINE +
INCLINE-
PROGR
APP QR CODE
1
2
3
4
89 10 11
12
5
67
08

09

10

SCAN RQ code on panel sticker or search SPAX-
/ZWIFT at APP store or Google play to download APP
11

12

V. MAINTENANCE
This product must be earthed. If the power cord
is damaged,it must be replaced with a manufacturer
recommended power cord.
Keep your equipment in a enclosed place, away from dust or humidity. Don’t
store it neither in a garage or in a indoor backyard, or near the water. Humidity, dust and
water could damage it and have an effect on its functioning.
Make sure that the cable and plug are in perfect conditions. Electric
cables must be away from hot surfaces.
Supervise and tighten the screws on a regular
basis, because due to the vibration the screws and nuts tend to loosen.
It’s a correct lubrication of the treadmill with
use.There is a hole for adding oil on motor cover. After starting
machine, please change to highest speed, then add the oil into
the hole, the oil will be spread from the middle between the
running belt and board.
< 3 hours/week 2 months
4 – 7 hours/week 1 month
> 8 hours/week 15 days
2 months
1 month
15 days
13

Due to its use, the belt can move off center.
If the belt has moved to the left, start treadmill and increase
-
wise. Don’t tighten the belt too much in order to be able to
walk. Repeat this procedure until the belt is properly aligned.
Don't use abrasive products. A damp cloth is enough.
If your unit is provided with leveling wheels, please adjust them in order to
avoid vibrations and therefore malfunctions.
If deviate to the left then adjust the
screw on the left side clockwise or
the screw onthe right side
anticlockwise.
If deviate to the right, then adjust
the screw on the right side
clockwise or the screw on the
left side anticlockwise.
14

VI. COMMON ERRORS
15

VII. THE OBVIOUS DANGER LIST
16

VIII. WARRANTY
VIII. WARRANTY
IMPORTANT.
This lubrication MUST BE PERFORMED REGULARLY DEPENDING ON EACH
PERSON, EVEN BEFORE ITS FIRST USE.
YOU MUST PRESERVE THE ORIGINAL PACKAGING WITH ITS PROTEC-
TIONS, PURCHASE RECEIPT, MANUAL AND COMPONENTS DURING THE
GUARANTEE PERIOD.
We have one year quality warranty to the products. Within the warranty period, we provide the
FREE replacement parts. If caused by incorrect assembly, incorrect use or change of parts
failures, our company takes no responsibility. You should show our products series no. and
relative pictures or information before getting the warranty. This treadmill is only for home
use, if the problems occurred by commercial used, our company takes no responsibility
17

IX. NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
-
ates uses and can radiate radio frequency energy and, if not installed and used in accordance
-
ment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the inter-
-Connect the equipment to an outlet on a circuit different from that to which the receiver is
-
ble for compliance could void the user’s authority to operate the equipment.
18