FUQIDO 1325 Guide

Congratulations, you are now the owner of a brand
new FUQIDO chair!
Before enjoy the comfort chair, you have to put it
together. This assembly guide will take you through
the basic assembly process. To make sure your
assembly goes smoothly, please follow the assembly
instructions, and especially the important
safety information.
It is possible to assemble the chair by your own,
while having a second person to help you
makes it more easier.
And please check if there are any missing parts from
the package before start. If there be any issues,
please don't hesitate to drop us an email and we'll
help you out ASAP.
ASSEMBLY DRAWING
MODEL:1325
Assembly video Contact us if you have
any issues
Mind the important
safety information
Having a friend to help
makes assemblyextra-easy
Seat Cushion *1
Cylinder and Cover set *1
Star Base *1
Casters *5
Mechanism *1
Back Pillow *1
Angle Adjustor *2 (L/R)
Lower Adjustor Cover *2(L/R)
Upper Adjustor Cover *2(L/R)
Head Pillow *1
Back Cushion *1
Arms *2 (L/R)
Wrench *1
[ ]
O
[ ]
B
[ ]
K
[ ]
D
[ ]
L
[ ]
E
[ ]
G
[ ]
H
[ ]
I
[ ]
J
[ ]
F
[ ]
A
[ ]
C
Small Bolts *4
[ ]
N
Big Bolts *20
[ ]
M
E-mail: [e-mail] Web: fuqidochair.com Tel: [phone]
FEATURES
Height Adjustor
Tilting
Angle Adjustor
Lock
90°-135°
Tilt Tension
Unlock
Before you get started, a few pointers:

Sit in the center of the
chair, with your back
to the backrest
Do not push the chair
around when a person
is sitting in it
Do not sit at the front
edge of the chair
Do not push down on
the backrest when a
person is reclined
Do not stand on the
chair
Do not place all your
weight on the backrest
only
Do not place your
hand or ngers near
the recline mechanism
Do not use the chair with
more than one person
To ensure proper assembly, follow all steps and use all parts. Failure to follow this warning
can result in serious injury to yourself or others.
Use the carton/carpet as a working
surface to prevent product damage
during assembly.
MODEL:1325
ASSEMBLY INSTRUCTION
1
5
2
8
3
7
4
6
Step 1 : Turn the Star Base(D) upside down, then press the Casters(L) into the holes at the end of each base
leg, insert the Cylinder (K) into the center hole of the Star Base, the Cylinder Cover(K) should be placed over the
Cylinder.
Step 2 : Attach the Mechanism(E) to the Seat Cushion(B) with four Big Bolts (M), using the
Wrench(O).
Step 3 : Attach two Arms(C) to the Seat Cushion(B) with Eight Big Bolts (M), using the Wrench(O).
Step 4 : Turn the Seat Cushion upright and align the center hole of the mechanism over the cylinder, then push
the seat cushion down onto the cylinder rmly until the connection is secure.
Step 5 : Attach the Left Angle Adsjutor(H) and Right Angle Adjustor(H) to the seat cushion with four Big Bolts(M),
using the Wrench(O).
Step 6 : Connect Back Cushion(A) and Seat Cushion(B) with Four Big Bolts(M) , using the Wrench(O).
Step 7 : Adjust the balance of the seat cushion and back cushion, then tight all bolts to 100% at this step.
Step 8 : Attach two Upper Adjustor covers(J) and two Lower Adjustor cover(I) with four small bolts (N), using the
wrench(O).
NOTE : Make sure that the front of the Mechanism is facing the front of the Seat Cushion.
NOTE : Arms are labeled with an "L" (left) or "R" (right) to show which sides they should be placed on.
100%
tighten
E-mail: [e-mail] Web: fuqidochair.com Tel: [phone]
SAFETY AND MAINTENANCE Do not stand on the chair, Do Not use the chair as stepladder.
Use this product for seating one person at a time.
Do not use the chair unless all bolts and screws are rmly secured.
Avoid contact with sharp objects to prevent puncturing the fabric.
Every 6 months, check all bolts and screws to ensure they are tight.
To clean, spot clean only using a damp towel and mild cleaner, rst test on a small,
obscure area of fabric.
Chair weight limit not to exceed 330 lbs.
[ ]
K
[ ]
K
[ ]
L
[ ]
D [ ]
B [ ]
C
[ ]
O
[ ]
O [ ]
O [ ] O
[ ]
O
[ ]
M
[ ]
M
[ ]
M
[ ]
A [ ]
A
[ ]
J
[ ]
N
[ ]
I[ ]
I
[ ]
H [ ] H
[ ]
M
[ ]
E [ ]
B
[ ]
B