Furnotel FSEWM-0304AFSEWM-0304B User manual

Waffle Machine（Muffin Maker）
Instruction Manual
FSEWM-0304AFSEWM-0304B
FSEWM-0304BFSEWM-0304
Shinelong International Co., Ltd
Web: http://www.furnotel.cn
E-mail: [email protected]
Fax:[phone]
TEL: [phone]
Address: 301,Building 1,Tian An Hi-tech Ecological
Park Panyu Avenue Panyu,Guangzhou,China
Park Panyu Avenue Panyu, Guangzhou, China

Waffle Machine（Muffin Maker）is my company's latest research and
development of electric heating products, its style is unique, unique, the
overall structure of safe and reasonable, easy to operate, small size,
beautiful appearance.
Muffin is a kind of cake with less water. It is an egg, sugar and flour as its
basic material. Its construction principle is interlinked with cake.Only the
formula of the muffin is less water and the cake is different from the
cake in the way it is packed and shaped.We all know that the cake
contains a lot of water and the batter has been diluted. It must be used
for baking or baking.
This manual introduces the Waffle Machine （Muffin Maker ）
series.Please read this manual carefully before use, in order to operate
correctly and use it to maximize the function of this product.
一、Performance Characteristics
1.An automatic thermostat is used to set the required temperature
(50-320 degrees Celsius).
2.Adopt heat resistant, heat insulation material, double layer heat
insulation process design, safety, energy saving and high efficiency.
二、Basic Parameter
Name
1-Head
shape Waffle
Baker
1-Head
Peach shape
Waffle Baker
4-Head shape
Waffle Baker
6-Head shape
Waffle Baker
Model
FSEWM-0304
FSEWM-0303
B
FSEWM-0304B
FSEWM-0304A
Voltage
220-240V～
/50Hz
220-240V～
/50Hz
220-240V～
/50Hz
220-240V～
/50Hz

Power
2 kW
1.6 kW
1.6kW
2 kW
Temperature
Control Number
1
1
1
1
Temperature
range
50℃~300℃
50℃~300℃
50℃~300℃
50℃~300℃
Dimension
（mm）
310*380*255
280*340*255
285*380*260
310*380*255
三、Schematic diagram of electrical equipment
HL-Power indicator HL1-Heating indicator EH1/EH2-Electric heating tube
WK-Thermostat PE-Enclosure ground
四、Operation instructions
1.The temperature control device is arranged on the furnace surface
right, the power supply is switched on, the green light, clockwise
rotation respectively the thermostat, the desired temperature value at
the required temperature, the yellow indicator light, the electric heating
tube to work.When the temperature rises to the required temperature,
the thermostat automatically cuts off the power supply, while the green
indicator light is on, the yellow indicator lamp goes out, and the electric
heating tube stops working.When the temperature decreases slightly,

the thermostat will automatically switch on the power, yellow light,
green light, electric heating tube heating recovery, temperature rise, this
repeated cycle, to ensure that the temperature in the range of set value
constant.
2.The desired temperature can be adjusted according to the
requirements so as to make the prepared food obtain an ideal effect.
3.If abnormal phenomena occur during use, the utility model must be
stopped immediately, and the utility model can be used continuously
after checking and troubleshooting.
4.According to the above instructions, the operator can set the heating
time and temperature according to the different size formula and each
hobby.For example, Roast Chicken cake can set the heating time is 4
minutes, the heating temperature is 170 DEG C, set after the slurry with
good pour under the pie plate, put on the cake plate under pressure and
cake plate, heating start time, time after the buzzer quotdi Di Di "alarm
operation and when take out food, or food may be burnt.In short, over
time, the higher the temperature, the darker the color of the toast, and
the lighter the color. But the time can not be too short, if too short, food
may be unfamiliar or no color.
五、Installation notes
1.The applied voltage must be consistent with the nominal voltage of the
furnace nameplate。

2.The socket shall be equipped with current leakage protector, and the
grounding wire of the socket shall be reliably grounded.
3.The equipment should be laid on a suitable platform for easy work.
And away from flammable and explosive materials, pay attention to
safety.
4.After heating, please don't touch the cake pan, top cover and handle
bar to avoid scalding.
5.After use, should be promptly cleaned, so as not to time, dirt is not
easy to erase. Wash with wet towels with detergent, but don't rinse with
water.
6.The time setting function of this device only alarms, prompts the
operation time, and does not cut off the power supply. Therefore, the
operation should be timely operation.
六、General troubleshooting
Problem
Reason
Solution
1.When the power is on, the
indicator light does not turn
on
1.power switch fuse fuse
2.Bad contact of power line
1.Replace the fuse
2.Fasten the power cord
2.Yellow indicator light does
not go out, furnace
temperature rise shall
not be controlled
1.Wrong indication of the
indicator light
2.The thermostat is out of
order
1.Wiring in correct line
2.Replace thermostat
3.the indicator light is
not bright, the
furnace temperature
control is normal
1.Poor contact of the
indicator light
2.Indicator burned
out
1.Fastening
connection
2.Replace the
indicator light

The above failure items are for reference only. If any faults occur, they
shall be stopped immediately and shall be notified to the technical
personnel for inspection and maintenance as soon as possible!
七、Transportation and storage
During the course of transportation, severe shock and collision should be
avoided.When not in use for a long time, it should be stored in a well
ventilated, air dry and non corrosive gas warehouse.Rainproof and
corrosion prevention measures should be adopted for temporary
storage.
八、Cleaning and maintenance
1.In cleaning and maintenance, the power shall be cut off to prevent
accidents.
2.After the daily work, the wet towel with no corrosive detergent can be
used to clean the surface of the furnace body and the outlet line of the
power supply. Water is not allowed to be washed directly so as not to
damage the electrical performance.
△
！Warning：
This product must be safely earthed before use!
Never flush the furnace body and the heating panel surface with clean
water!
This machine shell must be earthed to ensure safety. Thank you for your
cooperation!