Furnware Storg ST22PCL.2PCP450L.CPWH User manual

LEFT RIGHT
25
KG
25
KG
ATTENTION
FEATURES
Pull-out shelves for corner cabinet, two melaminated bottom shelves with
chromed wire rail. Right and left version.
FITTINGS
N° 12 6,3x16 mm Euroscrews
N° 28 4x25 mm Self tapping screws
PARTS
A. N°2 Shelves
B. N°2 Slides
C. N°2 Mechanisms
D. N°1 Mounting template
E. N°2 Plastic bush
F. N°4 Stopper
G. N°2 Pivoting guide
H. N°5 Caps
I. N°1 Drilling template
MAINTENANCE
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
TOOLS
A
G
EH
C
B
D
I
F
Storg Elska Pull-Out Cloud
ST22PCL.2PCP450L.CPWH
ST22PCL.2PCP450R.CPWH
A B C
Nuvola 40 Min. 360 Min.800 470
Nuvola 45 Min. 410 Min.900 490
Nuvola 50 Min. 460 Min.900 490
Nuvola 60 Min. 560 Min.1000 490
A
B
MAX.40
MAX.65
MAX.70
16-20
MAX.20
C

1
2
Fix the plastic slides B according to the holes
previously marked whit temèlate D.
Pre-drill the side cabinet using the specific
mounting template I or respecting the
quotes and then fix the mechanisms C on
the cabinet using the provided euroscrews
and Insert the plastic bushing E into the
mechanism C.
NB: If you use the article 371K, please follow the related instruction.
N° 28 4x25
N° 28 4x25
202,20
42,35
50,30
97,80
218
283,40
103,50
258
342
370,50
137,70
201,40
197,50
248,70
302
330
305,50
433
563
693
35,00
44,50
64,00
10,00
65,00
93,50
9,50
41,50
73,50
all Ø5x12

3
4
Put the rotation pin G along with the stopper
F into the slide B.
Put the rotation pin G along with the stopper
F into the slide B. Put the shelf into the
mechanism C and into the rotating support G
previously mounted.
2
ART 371i

OPTIONAL SOFT CLOSE
Install the metal pin to the soft close support
as shown.
Install the metal pin under the shelf using the
pre drillid holes. Attach the soft close support
to the arm support (fig.1).
Attach the shelf to the track and support arm
as shown (fig.2). Install the soft close dampener
to the pins (fig.3).
LEFT RIGHT
FIG.2FIG.1
FIG.3 REMOVE