Furuno FS-1575 Manual

SSB RADIOTELEPHONE
FS-1575/2575/5075 Operator's Guide
The purpose of this guide is to provide the
basic operation for this equipment. For more
detailed information, see the Operator's Manual.
All brand and product names are trademarks,
registered trademarks or service marks of their
respective holders.
English
- Turns the
power off.
- Decreases
the volume.
VOLUME
PWR OFF
VOLUME
PWR OFF
- Turns the
power on.
- Increases
the volume.
Lights in green when
main switchboard is on.
ALARM
OVEN
Flashes in red when
receiving distress and
urgency messages.
Flashes in green when
receiving safety and routine
messages, and when daily
test is completed.
RF GAIN
PUSH TO ATT
RF GAIN
PUSH TO ATT
Turns the
attenuator on/off
alternately on
the RT screen.
Adjusts
the gain.
Transmits the
DISTRESS ALERT.
DISTRESS
4 seconds
Composes DSC TX
message for DISTRESS
ALERT.
DISTRESS
MSG
Composes DSC TX
message except
DISTRESS ALERT and
DROBOSE.
OTHER
DSC MSG
Composes DSC
TX message for
DROBOSE
(Distress Relay
On Behalf Of
Someone Else).
DISTRESS
MSG
OTHER
DSC MSG
Press
simultaneously
Adjusts the brilliance.
BRILL
TAB
Turns the main
speaker on/off.
Opens/closes the menu.
- Cancels the creation
of the DSC message
currently being
created.
- Silences the audio
alarm.
- Erases error
message or pop-up
message.
- Returns one layer in
multi-layer menu.
- Erases character
input.
MENU
CANCEL
Confirms a
selection.
PUSH TO ENTER
PUSH TO ENTER
Selects menu items or changes the page in
multi-page screens.
- Opens the scan screen.
- Stops/starts the scanning
of DSC routine frequencies,
on the scan screen.
12
NB
3
SQ
4 6
97
5
NR
8
NF
0
TUNE
SCAN Switches to the RT
(radiotelephone) screen and
sets freq. to 2182.0 kHz.
2182 - Switches to the RT screen.
- Opens the CH setting
window on the RT screen.
RT/CH - Turns down the handset
volume.
- Moves the cursor when
setting channel or RX
frequency.
- Turns up the handset
volume.
- Moves the cursor when
setting channel or RX
frequency.
0to 9keys: Enter alphabet, numeric or
symbol.
1, 4and 7keys: Execute the operation
assigned to the function key in the RT
mode.
2
NB Turns the noise blanker on/off in the RT mode.
3
SQ Turns the squelch on/off in the RT mode.
5
NR Reduces the noise in the RT mode (NR2 (High),
NR1 (Low), Off).
8
NF Turns the notch filter on/off in the RT mode.
0
TUNE Tunes the antenna in radiotelephone operation.
- Switches control to
the tab area.
- Switches the
session.
SCAN 2182 RT/CH
12
NB
3
SQ
4 6
97
5
NR
8
NF
0
TUNE
COMPOSE
DROBOSE MSG
PUSH TO ENTER
DISTRESS
MSG
OTHER
DSC MSG
BRILL
TABMENU
CANCEL
HANDSETVOLUME
PWR OFF
RF GAIN
PUSH TO ATT
OVEN
ALARM
DISTRESS
Keep pressed for 4 sec in case
of DISTRESS.The alert is
transmitted with steady lighting.

SSB radiotelephone communications
Select class
of emission.
ENTER ENTER ENTER
Select [SSB].
ENTER
Select [CH].
ENTER ENTER
12
NB
3
SQ
4 6
97
5
NR
8
NF
0
TUNE
Press the
numeric keys to
enter channel.
ENTER
Press the PTT switch on
the handset to speak.
CH
Class of emission
Sending distress alert
DISTRESS
4 seconds
The audio alarm
sounds for two
seconds and the
message “Sending
DISTRESS
ALERT.” appears
on the screen.
After the distress alert has been sent, the
screen for “WAIT FOR ACK” appears.
When the distress
acknowledge call is
received, the audio
alarm sounds and the
message “DISTRESS
ACK received!
[CANCEL]: Stop
alarm.” appears on
the screen.
CANCEL
TX 2182 . 0 / RX 2182 . 00 kHz
09
°
12.1234’ N/ 123
°
45.1234’ E / 12 : 34
Communicate
with the coast
station via
radiotelephone.
Sending an individual call (ROUTINE priority)
ENTER
ENTER
Select [DIRECT INPUT].
ENTER ENTER ENTER
PTT
PTT
Press the numeric keys to enter
the MMSI of the station.
OTHER
DSC MSG
12
NB
3
SQ
4 6
97
5
NR
8
NF
0
TUNE
PRINT
TX 2182 . 0 / RX 2182 . 00 kHz
09° 12.1234’ N/ 123° 45.1234’ E / 12 : 34
CHANGE
[ WAIT FOR ACK ]
With
[GO TO CALL]
selected.
PUB. NO. OSE-56770-B
(1203, YOTA) FS-1575/2575/5075