Furuno VR-7000 Manual

The purpose of this guide is to provide the
basic operation for this equipment. For more
detailed information, see the Operator's Manual.
All brand and product names are trademarks,
registered trademarks or service marks of their
respective holders.
1. Open the DCU door with its key.
2. On the power control panel in the DCU, turn on the AC and BATTERY
switches in that order. Confirm that the AC SUPPLY MAINS LED and
BATTERY BACKUP LED on the power control panel light. Data is
automatically recorded in the Fixed DRU*, Float-free DRU* and long
term device.
How to turn the power on/off, How to start/stop recording
Recording is terminated only under the following conditions:
- During essential maintenance while the vessel is in port.
- When the vessel is laid-up.
•Turn off the BATTERY and AC switches in that order.
How to release the Fixed DRU
How to turn the power on then record the data
Model
VOYAGE DATA RECORDER (VDR) / SIMPLIFIED VOYAGE DATA RECORDER (S-VDR)
VR-7000 / VR-7000S
Operator's Guide
English
How to turn the power off then stop recording
Note: Do not turn off the system from the main breaker while the
BATTERY switch is on. If this is done, the system operates on the
batteries. The system stops after running on batteries after two hours.
Data Collecting Unit (DCU) Power control panel
Note: Do not exert force on the
opened DCU door. Force can
damage the door.
BATTERY switch
AC switch
BATTERY BACKUP LED (BATT BACK UP)
AC SUPPLY MAINS LED (AC MAINS)
1. Turn off the BATTERY and AC
switches in that order to turn
off the DCU power.
2. Remove the release pin.
3. Lift the release lever.
4. Lift the handle to separate the
top of the DRU from the
bottom of the DRU.
5. Cut the cable connected
between the top and bottom
of the DRU.
Release lever
Release pin
Handle
*: Select one for VR-7000S.

BRILL
ENT
MENU
ESC
TEST
Extract
ACK
ACK
TEST
BRILL
For
LCD
For
LCD
For
keys
For
keys
MENU
ESC
ENT
or
The alert list provides information about active alerts.
- Stops the flashing of the alert list.
- Silences the alert buzzer.
How to see the detailed information for an alert
ENT
Select an
alert.
MENU
ESC
Select a test.
ENT
Select a
menu item.
ENT
MENU
ESC
ENT
- Confirms a selection.
- Silences the alert buzzer when
there are unacknowledged alerts.
Closes the
detailed
information
screen.
Short press: Selects a menu
item.
Pub. No. OSE-44850-C
(1907, REFU) VR-7000/S
The detailed
information
screen
appears.
Note: Extract the data when the ship is stopped. Vibration, pitching,
rolling, etc. can prevent smooth extraction.
How to extract the recorded data to the external media
Alert list
Self test
How to adjust the brilliance
of the LCD and keys
Short press: Switches the page.
Long press: Moves the cursor
continuously.
BRILL
LCD Min
Min
Max
MaxKe
y
5
5
◄►
▼▲
Self Test
LCD Test
Buzzer Test
Execute SAVE Function
Serial Monitor
Sensor(LAN)Monitor
Analo
g
Monitor
Di
g
ital Monitor
Ima
g
e Ca
p
ture Status
Audio Monitor
Life Parts List
Status Monitor
Settings
Alert List
Alert ID Alert Name Time of last chan
g
e
412324 No.08 Sensor(LAN 15:24:37
412323 No.07 Sensor(LAN 15:24:37
412322 No.06 Sensor(LAN 15:24:37
412321 No.05 Sensor(LAN 15:24:37
412320 No.04 Sensor(LAN 15:24:37
[MENU
/ ESC]: List [ENT]: In
p
ut ◄ /
►
: Pa
g
e ▲ /
▼
: Select
◄1
/ 2 ►
Only for VR-7000S*
Only for
VR-7000S
Main menu overview
*: Execute SAVE function for
recorded data
If marine incidents occur, record
the data to area1 (or 2, 3, 4) in
the long term device(s).
▲
1 hour
▼
(1
~
12) hour
Period Select
Extract Size / Disk S
p
ace
xxx, xxx, xxx, xxx b
y
te /
xxx, xxx, xxx, xxx b
y
te
User Disk Format?
No
Yes
Source Select
Long Term Device
Float DRU
Area1 01/06/2016 17:20:30-01/06/2016 05:20:30 01
Area2 03/06/2016 23:10:15-03/06/2016 11:10:15 01
Area3 07/06/2016 19:30:50-07/06/2016 07:30:50 01
Area4 10/06/2016 10:40:20-09/06/2016 22:40:20 01
1. Open the DCU door with its key, then insert a USB flash memory.
2. Press the
Extract key.
3. Use the cursorpad to select the data source, then press the ENT key.
4. Use the cursorpad to select the extraction method, then press the ENT key.
5. Do the following procedure according to the method selected at step 4.
Extract Mode Select
Target Date and Time Specify
Extract Period Select
Target Date and Time Specify
16 / 04 / 2019 15 : 20
DD MM YYYY hh mm
▲
Range:+- 1 hour
▼
(1
~
6) hour
Target Dateand Time Specify
[Target Date and Time Specify] is selected
Specify the date and time for the data to be
extracted.
[Extract Period Select] is selected
Set the extraction time.
6. After setting the extraction time, the window that indicates the extraction
data size and disk space appears. Press the ENT key to close the window,
then select [Yes] to start extracting.
7. Confirm that “Extract Complete” message appears, then disconnect the
USB flash memory and lock the DCU door.
00017934412