1. INSTALLATION
2
Firewall software block setting
Confirm that “JAVA (TM) Platform SE binary” is not blocked by the Firewall. If blocked, enable
“JAVA (TM) Platform SE binary”. When “JAVA (TM) Platform SE binary” is blocked, the Live Play-
er V5 cannot connect with the VDR.
To confirm the firewall settings, open the [Windows Firewall with Advanced Security] dialog box
as follows:
• Windows®7: [Start] button > [Control Panel] > [Windows Firewall] > [Advanced settings] > [In-
bound Rules]
• Windows®8.1: Open the desktop > Move the mouse pointer to the bottom right edge of the
screen > [Settings] > [Control Panel] > [System and Security] > [Windows Firewall] > [Advanced
settings] > [Inbound Rules]
• Windows®10: [Start] button > [All Apps] > [Windows System] > [Control Panel] > [System and
Security] > [Windows Firewall] > [Advanced settings] > [Inbound Rules]
1.2.1 Windows®7
Install the software
1. Insert the supplied program CD into the CD drive.
2. Run "view.exe" on the program CD to show the [Setup-VR-7000] dialog box.
3. Click the [Next] button.
4. Confirm that the install location is "C:\Program Files*\FURUNO" then click the [Next] button.
* Folder name for 32 bit. "Program Files(x86)" for 64 bit.
5. Click the [Yes] button.
6. Click the [Next] and [Install] buttons to install the software.
7. After the installation is completed, the message "Yes, restart computer now" is checked. Click
the [Finish] button to complete the installation and restart the PC.
Set the IP address and subnet mask
1. Click the [Start] button then click [Control Panel].
2. In the search box, type adapter.
3. Under [Network and Sharing Center], click [View network connections].
4. Right click the connection to change, and then click [Properties].
5. Click the [Networking] tab. Under [This connection uses the following items], click [Internet
Protocol Version 4 (TCP/IP v4)] then click [Properties].
6. Click the [Use the following IP address] button.
“Java(TM) Platform SE binary” is blocked, enable it.
