Fusion MS-NRX200i User manual

FUSIONENTERTAINMENT.COM
ENGLISH
MS-NRX200i
MARINE WIRED REMOTE

2
REGISTER YOUR PRODUCT ONLINE:
For your own peace of mind, register your product purchase online at
www.fusionentertainment.com
All FUSION True Marine Products are backed by a 3 Year Limited Consumer Warranty and by
registering your product you can be assured that if the unexpected occurs we’ll have your details
and be ready to help.
WARNINGS AND CAUTIONS
Do not attempt to open the unit’s chassis. There are no user-serviceable parts or adjustments
inside. Take care when handling.
CARE AND MAINTENANCE
As with all products with a chrome finish exposed to the harsh Marine environment, a little care
will help to preserve the finish and prevent corrosion. Fusion recommends that you clean any salt
water and/or salt residue from the remote with a damp cloth soaked in fresh water. Always fit the
protective cover when not in use.
RECORD YOUR PRODUCT DETAILS HERE:
SERIAL NUMBER DATE OF PURCHASE
AFFIX RECEIPT HERE

3
• USER INTERFACE AND CONTROLS...................................................................................................... pg 4
Control Panel Layout............................................................................................................................... pg 4
Button function ........................................................................................................................................ pg 4
• INSTALLATION...................................................................................................................................... pg 5
Fusion Remote Control Network............................................................................................................. pg 6
Connecting the MS-NRX200i to the 700 Series....................................................................................... pg 6
Connecting the MS-NRX200i to the MS-RA205 Stereo........................................................................... pg 7
Example of Installation with Multiple (3) Remote Controls pg 7
Connecting to an Existing NMEA 2000 Network ..................................................................................... pg 7
NMEA 2000 Optional Accessories ........................................................................................................... pg 7
• MOUNTING ............................................................................................................................................ pg 8
Mounting diagram..................................................................................................................................... pg 8
• OPERATION ........................................................................................................................................... pg 9
Power On/Off............................................................................................................................................ pg 9
Assigning the remote to a stereo ............................................................................................................ pg 9
Volume adjustment.................................................................................................................................. pg 9
Backlight brightness ............................................................................................................................... pg 9
Troubleshooting Guide............................................................................................................................ pg 10
• SiriusXM®SATELLITE RADIO ............................................................................................................. pg 11
• NMEA2000 OPERATION...................................................................................................................... pg 11
NMEA2000 Repeater mode ................................................................................................................... pg 11
NMEA2000 Repeater sentences............................................................................................................ pg 12
NMEA2000 Repeater Messages ............................................................................................................ pg 13
• SPECIFICATIONS................................................................................................................................. pg 15
• LICENSING .......................................................................................................................................... pg 15
CONTENTS

4
USER INTERFACE AND CONTROLS
BUTTON FUNCTION
CONTROL PANEL LAYOUT
POWER
Press to turn the unit ON — (Stereo &
Remote) Press and hold for 2 seconds to
power OFF — (Stereo & Remote)
MUTE
Press once to mute/un-mute audio
SOURCE
Press to cycle available sources.
Note: Press to find stereos when
‘no stereo found’ message is displayed.
MENU
Press to enter menu system. Press to
return to previous screen. Press and
hold to exit the menu structure. Press to
exit NMEA mode.
PLAY/PAUSE
Short Press
iPod/MTP/USB/CD/BT – Pause/Resume
current track.
DVD - Pause/Resume current video playback.
AM/FM/VHF - Press to cycle through
tuning modes (auto, manual, presets).
SiriusXM (USA Only) – Press to cycle
through tuning modes (channels, presets)
Press and Hold
AM/FM/SiriusXM/VHF – Store the
current station/channel as a Preset
BACK/PREVIOUS
Short Press
iPod/MTP/USB/CD/BT – Select the
previous track.
DVD – Select previous chapter
AM/FM/VHF – Start tuning down the
frequency spectrum or channel.
(Auto/Manual tuning mode) or previous preset
(Preset mode).
SiriusXM (USA Only) – Step down the channel list.
Press and Hold
iPod/USB/CD – Rewind the current track.
DVD - Rewind video playback.
AM/FM/VHF – Fast station/channel stepping.
SiriusXM (USA Only) – Fast browse down the
channel list. Release button to select channel.
FORWARD/NEXT
Short Press
iPod/MTP/USB/CD/BT – Select the next track.
DVD - Select next chapter
AM/FM/VHF - Start tuning up the frequency
spectrum or channel. (Auto/Manual tuning
mode) or previous preset (Preset mode).
SiriusXM (USA Only) – Step up the channel list.
Press and Hold
iPod/USB/CD – Fast forward the current track.
DVD – Fast Forward video playback.
AM/FM/VHF –Fast station/channel stepping.
SiriusXM (USA Only) – Fast browse up the
channel list. Release button to select channel.
ROTARY ENCODER
Turn to adjust volume, move up or down a
menu structure, or adjust a specific setting
item. Press to select a highlighted option,
confirm a setting.

5
INSTALLATION
To complete the ultimate marine audio experience MS-NRX200i Marine Wired Remote Controls can
be installed throughout the vessel to provide full control of multiple FUSION Marine Stereos, creating
flexible zone control and NMEA 2000 monitoring solutions.
NMEA 2000 Components Supplied with MS-NRX200i
Contents of the Box
1 x MS-NRX200i
1 x dust cover
1 x user manual
The MS-NRX200i is a
plug and play device
with two connection
options. Connect the
remote control to your
FUSION Marine Stereo
with the standard cable
kit provided with your
purchase or to a existing
NMEA 2000 network.
1 x Warranty card
1 x hardware mounting kit
1 x 6M NMEA 2000 Backbone Cable
1 x NMEA 2000 T-Connector
1 x NMEA 2000 female Terminator
1 x NMEA 2000 in-line Terminator

6
INSTALLATION OPTION 1:
FUSION REMOTE CONTROL NETWORK
Connecting a FUSION Network
To avoid exceeding the power loading limitations of a FUSION remote control network the maximum number of
devices supported on a FUSION network is;
1. One FUSION Stereo Head Unit (MS-IP700i, MS-AV700i, MS-RA205, MS-BB300, MS-UD650, MS-AV650, MS-
UD750, MS-AV750).
2. Up to three MS-NRX200i remote controls.
For installations requiring a greater number of devices or connecting to other NMEA 2000 equipment the
installation of a full NMEA 2000 network is required. Refer to Option 2.
Connecting the MS-NRX200i to a FUSION Stereo
For the MS-IP700i, MS-AV700i, MS-RA205 and MS-BB300 stereos use the red Powered Drop Cable supplied
with the stereo.
For the MS-UD650, MS-AV650, MS-UD750 and MS-AV750 stereos the WIRED REMOTE cable is located in the
wiring loom at the rear of the stereo.
Important Note: To provide power to the remote controls on the FUSION remote control network ensure NRX
POWER is enabled in the setting menu. Press the ‘Menu’ button and select ‘SETTINGS’ > ‘NRX POWER’ select
ON (MS-UD650, MS-AV650, MS-UD750 and MS-AV750 only).
NMEA 2000
TEE-CONNECTOR
NMEA 2000
BACKBONE CABLE - 6M
NMEA 2000
INLINE TERMINATOR
NMEA 2000
FEMALE TERMINATOR
FUSION Stereo Powered Network
Powered Drop Cable
Supplied with Stereo
FUSION
STEREO

7
Example of Installation with Multiple (3) Remote Controls
NMEA 2000
TERMINATOR LOCATED AT
END OF NETWORK
NMEA 2000
TERMINATOR LOCATED AT
END OF NETWORK
FUSION
STEREO
Stereo FUSION NMEA 2000 Drop Cable FUSION NMEA 2000 T-Connector
MS-AV700i CAB000852 CAB000581
MS-IP700i CAB000852 CAB000581
MS-RA205 & MS-BB300 CAB000863 (Included with MS-BB300) CAB000581 (Included with MS-BB300)
FUSION NMEA 2000 OPTIONAL ACCESSORIES
INSTALLATION OPTION 2: CONNECTING
TO AN EXISTING NMEA 2000 NETWORK
FUSION’s MS-NRX200i wired remote controls are capable of operating over an existing NMEA 2000
network, removing the need to wire back to the stereo unit. The MS-NRX200i pack contains all
necessary cables and connectors for connecting the remote control to an existing NMEA 2000 network.
Important Note: NMEA 2000 Drop cables for FUSION Stereo head units are not supplied with the
stereos. The drop cables are available from FUSION as an optional accessory. DO NOT use the red
FUSION Powered Drop cable in this installation. FUSION stereos must connect using the black NMEA
2000 drop cables.

8
MOUNTING DIAGRAM (NOT TO SCALE)

9
OPERATION
POWER ON/OFF
Press to turn on the remote control. The FUSION Marine Stereo will power on if currently OFF.
Note: If the remote control is configured to display NMEA 2000 data sentences the power on sequence
becomes a two-step process. See NMEA Repeater section below.
Press to MUTE the audio when the stereo is ON. Press and hold to turn the stereo and remote control OFF.
ASSIGNING THE REMOTE TO A STEREO
Press the ‘Menu’ button and select ‘SETTINGS’ > ‘STEREO’. Select the desired stereo from the list of
available devices on the network.
ASSIGNING THE REMOTE TO A ZONE
Press the ‘Menu’ button and select ‘SETTINGS’ > ‘ZONE’ > ‘ASSIGN’. Select the desired zone from the
list of available zones. Press the ‘Menu’ button to exit.
Note: Due to space limitations on the MS-NRX200i display the full zone name is not displayed if ALL
ZONES is selected.
VOLUME ADJUST
Turn the ‘Rotary Encoder’ to adjust volume levels. Press Encoder to move highlight
(if remote is assigned to ALL ZONES).
ZONE 1 > ZONE 2 > ZONE 3 > ZONE 4 > ALL ZONES >
BACKLIGHT BRIGHTNESS
Press the ‘Menu’ button and select ‘SETTINGS’ > ‘LCD’. Turn the ‘Rotary Encoder’ to adjust Brightness or
Contrast. Press the ‘Rotary Encoder’ to step between Brightness and Contrast. Press the ‘Menu’ button to exit.
After a period of inactivity the remote turns off the display backlight (Default). To disable this function
Press the ‘Menu’ button and select ‘SETTINGS’ > ‘POWER SAVE’. Press the ‘Rotary Encoder’ to
enable/disable the function. Press the ‘Menu’ button to exit.

10
Message Description Solution
Waiting for network
check connections
Power detected on network. No
communication to/from stereo.
Check all network connections.
Stereo not assigned
press source button
to assign a stereo
During initial installation the remote
control will need to be assigned to a
stereo on the network.
Press Source button to display a list
of Fusion stereos on the network.
Select stereo from the available list.
Stereo off line Unable to detect stereo on network. Check power connection to stereo.
Waiting for stereo Stereo detected on network. Waiting
for stereo to complete power-on
sequence.
Wait for stereo to power on.
TROUBLESHOOTING GUIDE

11
NMEA 2000 REPEATER (NMEA 2000 NETWORK ONLY)
SiriusXM®SATELLITE RADIO
The remote control will also serve as an NMEA repeater displaying NMEA navigation data or vessel
performance data from other NMEA devices on an existing NMEA 2000 network.
NMEA 2000 REPEATER MODE
SELECTING NMEA 2000 DATA SENTENCES TO DISPLAY
Press the ‘Menu’ button and select ‘SETTINGS’ > ‘NMEA MONITOR’. Select the NMEA data to be
displayed from the list of available data. Press the ‘Menu’ button to exit.
• Wind Direction
• Wind Speed
• Depth
• Speed over Ground
• Speed through Water
SELECTING THE DISPLAY METHOD
The remote control can be configured to automatically cycle through the selected NMEA 2000 data.
Press the ‘Menu’ button and select ‘SETTINGS’ > ‘NMEA Monitor’ > ‘CYCLE SCREENS’.
Select from the following options. Press the ‘Menu’ button to exit.
(USA only) - Requires optional SiriusXM®Vehicle Connect Tuner and subscription (not included) connected to
FUSION Stereo.
Only SiriusXM®brings you more of what you love to listen to, all in one place. Get over
140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment.
Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more
information, visit www.siriusxm.com
For additional SiriusXM operation information refer to the FUSION Stereo user manual
The user manual contains information regarding the following;
• SiriusXM installation and activation information.
• SiriusXM operation information.
• A trouble shooting guide to assist the user with installation and information regarding
SiriusXM status and error messages.
• Heading
• Position
• Water Temperature
• Atmospheric Pressure
• ETA
• 5 seconds
• 10 seconds
• Off
• 2 seconds

12
SELECTING UNITS OF MEASURE
Press the ‘Menu’ button and select ‘SETTINGS’ > ‘NMEA Monitor’ > ‘SET UNITS’. Select from the
following options. Press the ‘Menu’ button to exit.
Direction: Magnetic
True Speed: KM/H, MPH, KTS, M/S
Depth: Metres, Feet, Fathoms
Temperature: deg C, deg F
POWER ON/OFF — NMEA 2000 REPEATER MODE
If the remote control has been configured to display NMEA 2000 data sentences it can be turned on
independently of the FUSION Marine Stereo. This permits the user to monitor NMEA data without
turning on the stereo.
Press to turn on the remote control. The remote control will enter NMEA 2000 repeater mode and
will NOT turn on the stereo. The stereo can be turned on from the remote control by pressing the Menu
key to exit the NMEA 2000 repeater mode. To return to the repeater mode press and hold the Source key.
When in NMEA 2000 repeater mode the remote will monitor the state of the stereo. If the stereo is
turned on then the remote will allow the user to change volume and mute the stereo, play, pause and
skip track (back and forwards) without leaving NMEA 2000 repeater mode.
TURNING ON THE REMOTE CONTROL WITH THE MARINE STEREO TURNED ON
Press to turn ON the remote control. It will detect the stereo is on and enter the remote control mode.
CHANGING REMOTE CONTROL MODE
REMOTE CONTROL MODE NMEA2000 REPEATER MODE
Press and Hold
Press

13
NMEA 2000 REPEATER MESSAGES
PGN Number PGN Data Field FUSION Supported
127250 Heading Sensor Reference
0 = True, Yes
1 = Magnetic, Yes
128259 Speed Water Reference Type
00 = Paddle Wheel Yes
01 = Pitot Tube Yes
02 = Doppler Log Yes
03 = Correlation Log (Ultra-Sound) Yes
04 = EM Log (Electro - Magnetic) Yes
128267 Water Depth
Offset add/subtract Yes
129025 Position
Lat/Lon Yes
129026 COG/SOG
COG Reference
0 = True, Yes
1 = Magnetic, Yes
129029 GNSS Position Data Yes
130306 Wind Data
Wind reference
0x00 = Theoretical Wind (ground referenced,
referenced to True North; calculated using COG/SOG) No
0x01 = Theoretical Wind (ground referenced, referenced
to Magnetic North; calculated using COG/SOG) No
0x02 = Apparent Wind (relative to the vessel centerline) Yes
0x03 = Theoretical (Calculated to Centerline of the vessel,
referenced to ground; calculated using COG/SOG) No
0x04 = Theoretical (Calculated to Centerline of the vessel,
referenced to water; calculated using Heading/Speed through Water) No
130310 Water Temp & Air Pressure Yes
130311 Water Temp & Air Pressure Yes

14
130312 Temperature Yes
Temperature Source
00 = Sea Temperature Yes
01 = Outside Temperature No
02 = Inside Temperature No
03 = Engine Room Temperature No
04 = Main Cabin Temperature No
05 = Live Well Temperature No
06 = Bait Well Temperature No
07 = Refrigeration Temperature No
08 = Heating System Temperature No
09 = Dew Point Temperature No
10 = Wind Chill Temperature, Apparent No
11 = Wind Chill Temperature, Theoretical No
12 = Heat Index Temperature No
13 = Freezer Temperature No
130314 Actual Pressure
Pressure Source
00 = Atmospheric Pressure Yes
01 = Water Pressure No
02 = Steam Pressure No
03 = Compressed Air Pressure No
04 = Hydraulic Pressure No
130577 Direction Data
COG Reference
0 = True, Yes
1 = Magnetic, Yes
SOG Yes
STW Yes
129284 Navigation Data
ETA Date Yes
Bearing, Origin To Destination Waypoint No
Bearing, Position To Destination Waypoint No
Destination Waypoint Number No
Destination Wpt Latitude No
Destination Wpt Longitude No
Waypoint Closing Velocity No
PGN Number PGN Data Field FUSION Supported

15
PGN Number PGN Data Field FUSION Supported
SPECIFICATIONS
LICENSING
Sirius, XM and all related marks and
logos are trademarks of SiriusXM Radio
Inc. All rights reserved.
NMEA 2000 - is a Registered
Trademark of the National Marine
Electronics Association, Inc.
OPERATING VOLTAGE: 10.8 - 16VDC Negative ground
CURRENT CONSUMPTION: @12V 110mA
NMEA 2000 LEN: 3 (150mA)
OPERATING TEMPERATURE: 0 to 50 °C (from 32 to 122°F)
STORAGE TEMPERATURE: -20 to 70 °C (from -4 to 158°F)
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

FUSIONENTERTAINMENT.COM
© Copyright 2015 by Garmin Limited. All rights reserved. Product specifications, design and prices are subject to change without notice.
Product availability may vary between sales regions. 190-01823-00