FUST NOVAMATIC TK 816 E Instructions for use

DE
Bedienungs- und
Wartungshandbuch
FR
Livret d’instructions
et d’entretien
IT
Manuale uso
e manutenzione
GB
User instructions
and maintenance
Dipl.Ing.
www. .ch
Service - Telefon: [phone]
TK 816 E

33
SM2208
CONTENTS
MODEL: ...................................................................................................................................................................................................................
SERIALNUMBER:.........................................................................................................................................................................................
DATE OFPURCHASE:................................................................................................................................................................................
ENGLISH
Dear Customer,
Thank you for choosing our product.
Please read these instructions carefully before connecting and using the appliance.
Knowledge of the operating principles will help guarantee correct and safe use of the appliance.
This instruction booklet contains the technical characteristics of the drier and is full of useful infor-
mation regarding its operation, all designed to help you get the best out of your appliance.
If the appliance is sold or handed over for use by others, remember to give the new user the
instruction booklet.
GB
NOTES ANDADVICEFORTHEUSER 33-34
• Technical information 33
DESCRIPTION OFTHEAPPLIANCE35
• Optional accessories 35
INSTALLINGTHEAPPLIANCE35-37
• Installation 35
• Levelling the drier 36
• Connecting to the mains supply 36
• Connecting the condensation drain to the drainage system. 36
• Changing the door opening direction 37
USINGTHEDRIER 37-39
• Precautions for fabrics 37
• Recommendations prior to drying 37
• Description of the control panel 38
• Programme 39
• How to dry 39
MAINTENANCE39-41
• Internal light 39
• Draining the condensation reservoir 40
• Cleaning and maintenance 40-41
• Troubleshooting 41
• Resolving problems 41
NOTES ANDADVICEFORTHEUSER
Width cm.:
Height cm.:
Depth cm.:
Dimensions:
59.5
85.0
60.4
see characteristics plate
see characteristics plate
see characteristics plate
Max. capacity
Power rating
Voltage
TECHNICALDATA

34
SM2208
NOTES ANDADVICEFORTHEUSER
▼ This appliance has been designed for use as a
domestic drier. Any other use is considered as
improper and therefore dangerous.
▼ Keep this instruction book near to the appliance
always, so that it can be easily consulted when
necessary.
▼ Any modifications or attempts to interfere with
the appliance can be dangerous for the user and
may damage the product.
▼ On delivery of the appliance, check that it has
not been damaged during transport. If any
damage is discovered, report the matter to the
retailer immediately.
▼ Do not cover the drier with washing or any other
items.
▼ When positioning the appliance, ensure that the
power supply cable is not kinked or squashed
and is accessible.
▼ Always close the door after using the drier.
This will prevent children from leaning on the
door and possibly overturning the drier.
▼ The appliance must not be used by children
unless supervised.
▼ Do not use the drier for drying dirty clothes.
▼ Never dry items that have been soiled with
substances such as cooking oil, petroleum,
acetone, alcohol, petrol, kerosene, stain
removers, turpentine, wax.
▼ Remove these substances in a hot wash using
an additional quantity of detergent prior to
loading the items in the drier.
▼ Do not dry items such as foam rubber, latex,
raincoats, waterproof fabrics, rubber mats,
preformed items, clothes or cushions with foam
rubber inserts, as these may melt and damage
other items in the washing or even the appliance
itself.
▼ Fabric softeners, or similar products, must be
used respecting the manufacturer's instructions
on the packaging.
▼ If the appliance is sold or given away, remember
to hand over this instruction book with it.This will
help the new owner use the drier both correctly
and safely.
▼ Do not attempt to repair any appliance faults
alone, in that repairs carried out by a non-
professional may cause serious damage
and will invalidate any rights to repairs under
guarantee.
▼ Repairs to the appliance can only be carried
out by personnel authorised by the customer
service centres. All repairs must make use of
original spare parts only.
▼ Spin dry or wring the washing well before
loading it into the drier. Spun dry washing will
dry quicker.
▼ Clean the filter thoroughly each time the
drier is used in order to guarantee perfect air
circulation.
▼ Never insert or remove the plug from the mains
socket with wet hands.
▼ The drier must be connected to a mains socket
fitted with an efficient earth complying with
current safety standards.
▼ Do not use extension leads or multiple plug
adapters to connect the appliance to the mains
supply.
▼ Do not expose the appliance to atmospheric
agents.
▼ When servicing or cleaning the appliance,
remember to disconnect it from the mains
supply.
▼ Do not pull the power supply cable to unplug
the appliance from the mains supply. Pull the
plug only.
▼This appliance is marked as complying
with European Directive 2002/96/EC, Waste
Electrical and Electronic Equipment (WEEE).
Make sure that the product is disposed of in a
correct manner.The user is obliged to contribute
towards preventing any negative consequences
for health and the environment.
The symbol affixed to the product or
accompanying documents signifies that the
product must not be treated as normal domestic
refuse, but must be delivered to an authorised
collection centre to enable the electric and
electronic equipment to be recycled.
When disposing of the appliance, comply with
local waste disposal regulations.
For further information on the treatment,
recovery and recycling of this product, refer to
the appropriate offices, local domestic waste
collection service or the retailer from where the
appliance was purchased.
Warning!!! Surfaces on which
this symbol appears may heat up
during normal operation.
GB
THEMANUFACTURER WILL NOTBE HELD
RESPONSIBLE FORANY INCIDENTS
RESULTINGFROMNON-COMPLIANCEWITH
SAFETY STANDARDS ORTHEREQUIREMENTS
OFTHIS INSTRUCTION BOOK.

35
SM2208
11
10
9
7
6
8*
5
42
1
3*
DESCRIPTION OFTHEAPPLIANCE
GB
DESCRIPTION OFTHEAPPLIANCE
1Drum door.
2Drum door filter.
3Upper condensation water reservoir*.
(The condensation is collected in this reservoir
when the condensation drain hose is not
connected directly to the drainage system).
4Control panel.
5Drier drum.
6 Drum mouth filter.
7Rating plate.
8Lower condensation water reservoir*.
9Adjustable feet
10 Condenser door.
11 Lower door.
*according to model
INSTALLINGTHEAPPLIANCE
▼ Installation must be carried out by qualified personnel in line with the instructions
supplied by the manufacturer. Incorrect installation may result in damage and/or
injury.
▼ Do not install the drier in rooms subject to freezing temperatures. Freezing
temperatures could damage the electronics.
▼ Position the drier in a well-ventilated room.
▼ Do not cover the ventilation hole on the back (fig. 2) and do not place the drier on
thick carpet.
▼ Clean the inside of the drying drum using a damp cloth to remove any dust
deposits.
2
INSTALLATION
1
OPTIONALACCESSORIES
The retailer can provide an accessory to enable the drier to be mounted on top of a front - loading washing
machine, thus saving space. The installer will inform you of the appliance model for which this option is
possible.

36
SM2208
INSTALLINGTHEAPPLIANCE
LEVELLINGTHEDRIER
GB
5
4
The condensation can be collected in the reservoir (fig. 10) or, alternatively, the hose
can be connected directly to the drainage system.
In this case, the collected water is pumped out.
To connect the condensation hose directly to the drainage system, proceed as
follows:
▼ Before starting any operations, unplug the appliance from the mains socket.
▼ Extract the hose on the back of the appliance by pulling it from its housing, (fig.
5/6) and insert it in the waste water pipe.
▼ Make sure that the voltage indicated on the identification plate attached to the
back of the appliance corresponds to that of the mains supply.
▼ All cut-outs, electric wiring and mains sockets must have a rating such that enables
them to support the maximum load indicated on the identification plate.
▼ Once the appliance has been installed, it must be connected to the mains supply
through a single-pole switch.
▼ The mains supply to which the appliance is connected must be fitted with an
earthing system. If this is not the case, the manufacturer will not be held liable for
any incidents that may occur (fig. 4).
▼ If the power supply cable is damaged in any way, contact the appropriate
specialised customer technical service centre.
▼ The drier must not be connected to the mains supply using indirect methods such
as extension leads or multiple adapters.
▼ Position the appliance so that the power supply cable is easily accessible for
disconnection when the need arises.
Important: Oncompletion of the drying cycle, disconnect the appliance from the mains supply
to prevent young children from operating the drier.
CONNECTINGTO THEMAINS SUPPLY
CONNECTINGTHECONDENSATION DRAIN TO THEDRAINAGE SYSTEM.
6
Adjustable feet.Place the drier upright so that it rests firmly on all four feet.
Level the drier by adjusting the feet as follows:
▼ Lift the drier slightly.
▼ Adjust the feet to the correct height (fig. 3).
▼ Lower the drier.
NB. A badly levelled appliance may cause damage to the bearings and lead to
their premature wear. This drier does not need to be anchored to the floor.3